1. Introducció
The Flipsky VX3 Pro is a state-of-the-art 2.4G wireless remote controller engineered for high-performance electric water sports and skateboarding applications, including Efoil, Esurf, and ESK8. This manual provides essential information for the safe and effective operation, setup, and maintenance of your VX3 Pro controller.
2. Característiques clau
- 1.8-inch Super Clear Display: Provides comprehensive telemetry data.
- Advanced Telemetry: Displays GPS, motor power, real-time MOS tube temperature, and throttle progress bar.
- Àmplia compatibilitat: Compatible with Flipsky FSESC/FTESC and other VESC and Non-VESC systems.
- Funcionament en mode dual: Seamless switching between ESK8 (Electric Skateboard) and E-surf (Electric Surfboard) modes.
- Control de creuer: Dedicated cruise speed control function for E-surf mode.
- High Waterproof Rating: IP67 for reliable performance in wet conditions.
- Durada de la bateria ampliada: Equipped with a 1500mAh remote battery.
- ESC Failure Reporting: Detects and reports potential ESC failures for timely replacement.
- Flexible Control Modes: Supports PPM and UART controller modes.
- Càrrega còmoda: Features wireless magnetic charging.
- Integrated Receiver: VX3 Pro Remote includes a receiver (supports Flipsky non-VESC).
- Actualitzable el firmware: Supports online firmware upgrades.
- Comunicació millorada: Utilizes SX1280 communication module.
- Improved Microcontroller: Features GD32F303CGT6 transmitter microcontroller.
- FTESC ESC UART Protocol: Added support for FTESC ESC UART control protocol.
- Múltiples opcions de control: Supports UART, PPM, and UART&PPM control modes.
- Intuitive Function Switching: Joystick-based up and down switching control.
- Gear Lock Function: For added safety and control.
- Alarma de bateria baixa: Alerts for low battery levels on both skateboards and surfboards.
- Total Mileage Display: Fa el seguiment de la distància total recorreguda.
- Configuració personalitzable: Adjustable wheel diameter (up to 999mm) and default startup gear.
- Configurable Cruise/Reverse: Option to enable/disable cruise mode and reverse function.
- Rendiment optimitzat: Faster screen refresh rate and data display.
3. Especificacions
| Atribut | Detall |
|---|---|
| Pantalla de visualització | 1.8-inch, Super Clear |
| Dades de telemetria | GPS, Motor Power, MOS Tube Temp, Throttle Progress, Real-time Speed, Single Mileage, ESC Real-time Current, ESC Temperature, Putter Throttle Percentage |
| Compatibilitat | Flipsky FSESC/FTESC, VESC, Non-VESC |
| Modes de funcionament | ESK8, E-surf (with Cruise Control) |
| Classificació impermeable | IP67 |
| Capacitat de la bateria remota | 1500 mAh |
| Modes del controlador | PPM, UART, UART&PPM |
| Mètode de càrrega | Càrrega magnètica sense fil |
| Mòdul de comunicació | SX1280 |
| Transmitter Microcontroller | GD32F303CGT6 |
| Material | Plàstic |
| Piles incloses | Sí |
| Edat recomanada | 14+ anys |
| Certificació | CE, RoHS |
| Origen | Xina continental |
4. Contingut del paquet
The VX3 Pro controller package typically includes the following items:
- Flipsky VX3 Pro Remote Controller
- Mòdul receptor
- Coixinet de càrrega magnètica sense fil
- Cable de càrrega USB
- Receiver Connection Cables (PPM/UART)
- Corretja de canell
- Maleta de transport
5. Guia de configuració
5.1 Control remot acabatview
Familiarize yourself with the buttons and display on your VX3 Pro remote controller:
- Pantalla de 1.8 polzades: Shows telemetry data.
- Brake Trigger: Controls braking.
- Activador de l'accelerador: Controla l'acceleració.
- Botó d'engegada / apagada: Turns the remote on or off.
- Botó de configuració: Accedeix al menú i a la configuració.
- Charging Sign: Indica l'estat de càrrega.
- Hang Strap: For securing the remote.
5.2 Cablejat del receptor
The VX3 Pro receiver supports both UART and PPM control modes. Choose the appropriate wiring based on your ESC (Electronic Speed Controller).
5.2.1 UART Control Mode
UART control mode supports one-key reverse function and data display, applicable for ESCs based on VESC and FTESC controllers.
Connect the receiver to your VESC/FTESC as follows:
- Receiver VTX1 to VESC RX
- Receiver VRX1 to VESC TX
- Receiver GND to VESC GND
- Receiver 5V to VESC 5V
- BAT+ for battery level detection (optional, connect to main battery positive)
5.2.2 PPM Control Mode
PPM control mode operates without positive and reverse switching functions and is applicable to all ESCs.
Connect the receiver to your ESC using either PPM1 or PPM2:
- Connect Receiver PPM1 or PPM2 to the corresponding PPM input on your ESC.
- Connect Receiver GND to ESC GND.
- Connect Receiver 5V to ESC 5V.
- BAT+ for battery level detection (optional, connect to main battery positive).
For more detailed wiring, refer to the comprehensive diagram below:
5.3 Emparellament inicial
Typically, the remote and receiver come pre-paired. If re-pairing is necessary, consult the Flipsky support resources for specific instructions.
6. Instruccions de funcionament
6.1 Encès/Apagat
Press and hold the Power On/Off button on the remote to turn it on or off.
6.2 Screen Display Introduction (ESK8 Mode)
The 1.8-inch display provides real-time information. Below is an overview of the display in ESK8 mode:
- Mode UART: Indicates communication protocol.
- Bateria remota: Nivell de bateria del comandament a distància.
- Esk8 battery: Electric skateboard battery level.
- Receiver signal: Strength of the wireless connection.
- Speed mode (H/M/L): High, Medium, or Low speed setting.
- Motor steering: Direction of motor rotation.
- Velocitat en temps real: Current speed in km/h or mph.
- Single mileage: Distance traveled in the current session.
- ESC real-time current: Current draw from the ESC.
- ESC temperature: Real-time temperature of the ESC.
- Putter throttle percentage: Current throttle input.
6.3 Mode Switching (ESK8 / E-surf)
The remote allows free switching between ESK8 and E-surf modes. Use the joystick (up and down switching control) to navigate through the menu and select your desired mode. Refer to the remote's on-screen menu for specific navigation.
6.4 Cruise Speed Control (E-surf Mode)
In E-surf mode, the cruise speed control function can be activated. Consult the remote's menu settings to enable and adjust this feature.
6.5 Gear Lock Function
The gear lock function provides an additional layer of control. Activate and manage this feature through the remote's settings menu.
6.6 Personalització de la configuració
Access the settings menu using the Setting Button to adjust various parameters:
- Diàmetre de la roda: Can be set up to 999mm for accurate speed and mileage readings.
- Default Gear: Modify the default gear at startup.
- Cruise Mode/Reverse Function: Enable or disable these functions as needed.
7. Manteniment
7.1 Càrrega del comandament a distància
The VX3 Pro remote features wireless magnetic charging. Place the remote on the provided charging pad to initiate charging. Ensure the charging sign on the remote indicates proper connection.
7.2 Cura de l'impermeabilitat
With an IP67 waterproof rating, the remote is protected against immersion in water up to 1 meter for 30 minutes. However, it is recommended to rinse the remote with fresh water after use in saltwater environments and ensure it is dry before charging or storing.
7.3 actualitzacions de microprogramari
The remote supports online firmware upgrades. Periodically check the Flipsky official website or app for the latest firmware versions to ensure optimal performance and access to new features. Follow the provided instructions carefully during the upgrade process.
8. Solució De Problemes
- ESC Failure Report: The remote can detect and report possible failures of the ESC. If an ESC failure is reported, immediately cease operation and inspect your ESC for issues. Consult your ESC's manual or Flipsky support for diagnostic steps.
- Alarma de bateria baixa: The remote will provide a low battery alarm for both the remote itself and the connected skateboard/surfboard battery. Ensure both are adequately charged before use.
- Sense pantalla/No respon: Ensure the remote is charged. Try restarting the remote. If issues persist, contact support.
- Problemes de connectivitat: Ensure the receiver is correctly wired and powered. Re-attempt pairing if necessary. Check for obstructions or interference.
9. Consells d'usuari
- Comprovació de compatibilitat: While the VX3 Pro is broadly compatible with VESC and Non-VESC systems, always verify compatibility with your specific Efoil or Esurf model (e.g., Takuma) before extensive use.
- Actualitzacions periòdiques del firmware: Keep your remote's firmware updated to benefit from performance improvements and new features.
- Adjunt segur: Always use the provided wrist strap to prevent accidental drops, especially during water sports.
- Gestió de la bateria: Pay attention to the low battery alarms for both the remote and your vehicle to avoid unexpected power loss during operation.
10. Advertències de seguretat
⚠ AVÍS: Aquest producte us pot exposar a productes químics, inclosos els ftalats (DEHP), que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius. Per a més informació, visiteu www.P65Warnings.ca.gov.
Always operate your electric skateboard or surfboard responsibly and in accordance with local laws and regulations. Wear appropriate safety gear, including helmets and protective clothing, when operating any electric vehicle.
11. Garantia i Suport
For warranty information, technical support, or service inquiries, please contact Flipsky customer service or visit their official weblloc web. Conserveu el rebut de compra com a comprovant de compra.
