Makerbase CNC TS35-R / TS24-R Touch Screen Display User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of the Makerbase MKS TS35-R and TS24-R touch screen displays. These displays are designed to work exclusively with the MKS DLC32 V2.1 controller board, offering an intuitive interface for CNC laser engravers and similar applications.

Figure 1: MKS TS24-R and TS35-R displays showing main control, setting, and engraving interfaces. The TS24-R displays 'Control', 'Setting', and 'Engraving' options. The TS35-R shows 'S Status: IDLE', 'Z Status: IDLE', 'X Y POS', 'Power', 'Speed', 'WiFi: Disconnect', and 'Sculpture', 'Tool', 'Control', 'Adjustment' buttons.

2. Compatibilitat

Important: The MKS TS35-R and TS24-R displays are ONLY compatible with the MKS DLC32 V2.1 control board.

Ensure your controller board is the specified model for proper functionality and to avoid potential damage.

3. Configuració i instal·lació

The display connects to the MKS DLC32 V2.1 controller board via the provided 10-pin ribbon cable. Follow these steps for installation:

Ensure the MKS DLC32 V2.1 controller board is powered off before connecting the display.
Carefully align the 10-pin ribbon cable with the corresponding connector on both the display and the controller board. Ensure the orientation is correct to prevent damage.
Gently push the cable into the connectors until it is securely seated.
Once connected, you may power on the MKS DLC32 V2.1 board. The display should initialize and show the main interface.

MKS TS35-R V2.0 display connected to a controller board with a ribbon cable, showing working and mechanical coordinates. — Figure 2: MKS TS35-R V2.0 display connected to a controller board with a ribbon cable. The screen displays 'WiFi: Disconnect', 'Working coordinates' (X:0.0, Y:0.0, Z:0.0), 'Mechanical coordinates' (X:0.0, Y:0.0, Z:0.0), and buttons for 'Control', 'Sculpture', and 'Tool'.

4. Firmware

To ensure optimal performance and access to the latest features, it is recommended to use the correct and up-to-date firmware for your display and controller board. Firmware files and instructions can be found on the official Makerbase GitHub repository:

Firmware for MKS TS24-R: https://github.com/Macrobase-tech/MKS-DLC32/tree/main/MKS%20DLC32%2BTS24
Firmware for MKS TS35-R: https://github.com/Macrobase-tech/MKS-DLC32/tree/main/MKS%20DLC32%2BTS35

Please refer to the instructions provided on the GitHub page for detailed steps on how to flash the firmware.

5. Funcionament

The MKS TS35-R and TS24-R displays offer an intuitive touch interface for controlling your CNC machine. The main interface typically provides access to Control, Setting, and Engraving/Sculpture functions.

5.1 Main Interface Navigation

Upon startup, you will see the main screen with options such as:

Control: For manual movement of axes (X, Y, Z), setting home positions, and controlling spindle/knife.
Configuració: To configure display parameters, language, WiFi, and view board information.
Engraving/Sculpture: To select and start engraving jobs from files'emmagatzemen al dispositiu.
Eina: Access to various tools and utilities.

Video 1: Demonstration of the MKS TS35-R display's user interface, showing navigation through control, settings, and file selection menus, as well as axis movement and spindle control.

5.2 Control Functions (Example: MKS TS24-R)

Within the 'Control' menu, you can typically perform the following actions:

Moviment de l'eix: Use arrow buttons (X+, X-, Y+, Y-, Z+, Z-) to move the machine's axes.
Posició inicial: Set or return to the home position (H-Home).
Z-Clear: Clear the Z-axis position.
Spindle Control: Turn the spindle ON/OFF.
Knife Control: Activate/deactivate the knife function.
Ajust de velocitat: Select movement speeds (e.g., Low Speed, Mid Speed, High Speed).

Figure 3: MKS TS24-R V2.0 display showing Z-axis control, movement, spindle, and knife functions.

5.3 Engraving/Sculpture Functions

To start an engraving job:

Navigate to the 'Engraving' or 'Sculpture' menu.
Select the desired G-code file (e.g., Snoopy.nc, cube.gcode) from the list.
The display will show the progress of the job, including F (Feedrate), S (Spindle Speed), and R (Laser Power) percentages.
You can typically 'Hold' or 'Stop' the job, and access 'Adjustment' settings during operation.

Figure 4: MKS TS35-R V2.0 display showing engraving progress and file gestió.

5.4 Control d'aplicacions mòbils

The MKS DLC32 V2.1 controller board and compatible displays support mobile app control. Cerca "MKSLASER" on Google Play Store or Apple App Store to install the application on your phone.

L'aplicació mòbil et permet:

Adjust parameters like feedrate, speed, and laser power.
Monitor carving progress.
Edit and slice photos for engraving.
Enviar files directly to the motherboard.

Mobile app interface for MKS Laser, showing parameter settings and carving progress. — Figure 5: Screenshot of the MKS Laser mobile app, illustrating features like parameter adjustment (F, S, R percentages), carving progress, file management, and options to edit, slice photos, and send files to the motherboard.

6. Especificacions

6.1 MKS TS35-R Display Dimensions

Dimensional drawing for MKS TS35-R display, showing length, width, and height in millimeters. — Figure 6: Technical drawing of the MKS TS35-R display. Dimensions are: Length 110mm, Width 65mm, Display area 102mm x 57mm, PCB thickness 1.5mm, Component height 5mm. Mounting holes are 4xΦ3 and 4xR2.

MKS TS35-R Dimensions (Unit: mm)
Característica	Dimensió
Longitud total	110 mm
Amplada total	65 mm
Display Area Length	102 mm
Display Area Width	57 mm
Gruix de PCB	1.5 mm
Component Height	5 mm
Forats de muntatge	4xΦ3, 4xR2

6.2 MKS TS24-R Display Dimensions

Dimensional drawing for MKS TS24-R display, showing length, width, and height in millimeters. — Figure 7: Technical drawing of the MKS TS24-R display. Dimensions are: Length 80mm, Width 50mm, Display area 73mm x 44.5mm, PCB thickness 1.5mm, Component height 5.5mm. Mounting holes are 4xR1 and 4xΦ3.

MKS TS24-R Dimensions (Unit: mm)
Característica	Dimensió
Longitud total	80 mm
Amplada total	50 mm
Display Area Length	73 mm
Display Area Width	44.5 mm
Gruix de PCB	1.5 mm
Component Height	5.5 mm
Forats de muntatge	4xR1, 4xΦ3

7. Manteniment

To ensure the longevity and optimal performance of your display:

Mantingueu la pantalla neta amb un drap suau i sec. Eviteu productes de neteja o dissolvents abrasius.
Protegiu la pantalla de ratllades i impactes.
Ensure proper ventilation around the controller board and display to prevent overheating.
Regularly check cable connections for looseness or damage.

8. Solució De Problemes

If you encounter issues with your MKS TS35-R or TS24-R display, consider the following:

La pantalla no s'encén:
- Verify that the MKS DLC32 V2.1 controller board is powered on.
- Check the ribbon cable connection between the display and the board. Ensure it is securely and correctly seated.
La pantalla tàctil no respon:
- Restart the controller board.
- Ensure the correct firmware is installed for both the display and the controller board.
Incorrect display information or erratic behavior:
- Update the firmware to the latest version from the official GitHub repository.
- Ensure the display is compatible with your specific MKS DLC32 V2.1 board version.

9. Consells d'usuari

Mobile App Convenience: Leverage the "MKSLASER" mobile app for remote control and file management, which can streamline your workflow.
Actualitzacions de firmware: Regularly check the Makerbase GitHub for firmware updates. These often include bug fixes, performance improvements, and new features.
Gestió de cables: Ensure the ribbon cable is not under tension or bent sharply to prevent damage and ensure reliable connection.

10. Garantia i Suport

For technical support, warranty information, or further assistance, please refer to the official Makerbase documentation or contact your retailer. Always ensure you are using official firmware and following recommended procedures to maintain your product's warranty.

Official firmware and resources are available on the Makerbase GitHub page (links provided in Section 4).

	Manual de cablejat MKS DLC32 V2 - Makerbase Manual de cablejat complet per a la placa de control de gravat fora de línia Makerbase MKS DLC32 V2.0. Cobreix l'entrada d'alimentació, les interfícies, la configuració de l'accionament del motor, les connexions del làser i del fus, els topalls i el suport tècnic.
	Manual d'usuari de Makerbase MKS DLC32: Guia de maquinari i firmware Manual d'usuari complet per al controlador Makerbase MKS DLC32, que detalla les interfícies de maquinari, les actualitzacions de firmware i els mètodes de control per a màquines de gravat làser i CNC.
	Manual d'usuari de MKS DLC32 - Makerbase Manual d'usuari complet per a la placa controladora Makerbase MKS DLC32, que cobreix la interfície de maquinari, les actualitzacions de firmware i els modes de control per a impressores 3D i màquines CNC.
	Manual de la placa de control de gravat làser MKS DLC32 MAX - Makerbase Manual d'usuari complet per a la placa de control de gravat làser Makerbase MKS DLC32 MAX. Aprèn sobre les característiques, les especificacions, la connexió del maquinari, les actualitzacions de firmware, el control del programari i la resolució de problemes.
	Manual de l'MKS DLC32 V2: Característiques, connexions i especificacions Manual tècnic complet per a la placa de control de la màquina de gravat CNC Makerbase MKS DLC32 V2. Detalla l'entrada d'alimentació, USB, targeta TF, configuració de l'accionament del motor, connexions del làser i del cargol, topall, sonda, I2C i interfícies de brunzidor, incloent-hi diagrames de cablejat i especificacions.
	Impressora 3D Makerbase MKS-TFT28 amb pantalla tàctil LCD: guia de característiques, cablejat i configuració Una guia completa de la pantalla LCD tàctil en color de 28 polzades Makerbase MKS-TFT2.8 per a impressores 3D. Aquest document detalla les seves característiques, compatibilitat amb diverses plaques base, instruccions de cablejat, configuració d'engegada, actualitzacions de firmware, etc.tagcapacitats d'estalvi electrònic, integració de mòduls de detecció, personalització de fotos i connectivitat WiFi, incloent-hi opcions de control remot mitjançant APP, Printrun i Repetier-Host.

Makerbase MKS TS35-R, MKS TS24-R