1. Instruccions de seguretat
- For security, please read this user manual carefully before initial operation.
- Ensure the power is off before connecting. This product is produced without an internal fuse.
- This system must not endanger life or property during running failure, and all security risks must be eliminated.
2. Especificacions
| Paràmetre | Valor |
|---|---|
| Voltage | 12-265V AC / DC |
| Capacitat de càrrega | 1.5W |
| Pes | 156 g |
| Freqüència intermitent | 1 Hz |
| Mètode d'instal·lació | Vertical/Horizontal |
| Temperatura de treball | -20 °C ~ +60 °C |
| Nivell de protecció | IP54 |
| Mida | 60 mm * 85 mm |
3. Producte acabatview & Característiques
The Universal LED Signal Alarm Light is designed for various outdoor applications, featuring a robust and versatile design.
- Multi-Voltage Compatibilitat: Operates on 12V, 24V, or 220V AC/DC, making it suitable for a wide range of systems.
- Antena: Includes an antenna to extend the effective control distance of your RF controller.
- Durador i resistent a la intempèrie: Constructed from plastic material with an IP54 rating, ensuring it is waterproof and dustproof for outdoor use.
- Super Bright 360° LED: Provides high visibility with a 360-degree LED light source.
4. Instal·lació
- Desembalar: Obriu el paquet i traieu la lamp and all accessories. Remove the antenna by rotating it anti-clockwise.
- Marca els forats: Use the fixing holes of the bracket to mark two holes on the wall for mounting.
- Forats: Drill two 6mm diameter holes for the expansion plugs and one 10mm diameter hole for the wires. Insert the expansion plugs into the 6mm holes.
- Cables de ruta: Pass the power wire and antenna wire through the cable holes in the holder.
- Suport de muntatge: Fix the holder to the wall using the provided 4mm*30mm self-tapping screws.
- Connecteu els cables: Connect the power wire to Terminal 1 (12-265VAC/DC input) and the antenna wire to Terminal 2 (for RF controller extension).
- Cobertura segura: Place the cover back, ensuring it is fastened securely to the bottom base without any gaps. Screw the antenna up clockwise until tight.
- Orientació: Always install the holder and lamp upright to the ground. Horizontal installation may allow rain to enter the lamp and damage the circuit board.
Avís de cablejat:
- Terminal 1 is for connecting the power input; working voltage is 12-265VAC/DC.
- Terminal 2 is for connecting the antenna of the RF controller to extend the effective working distance.
5. Funcionament
Un cop lamp is powered on, the LED will start flashing at 1Hz (default setting).
- Flashing/Constant On Mode: The switch 'sW1' controls the lamp's mode.
- If the CAP short-connects the 2 pins, the lamp operates in flashing mode.
- If the CAP is removed from the 2 pins, the lamp operates in constant 'on' mode.
- Vol. Alttage Advertència: Be careful! The entire circuit board contains high-voltage components. Always ensure the power is off before opening the cover or making any adjustments.
6. Escenaris d'ús
This versatile signal light is suitable for a wide range of applications, enhancing safety and visibility:
- Portes de garatge
- Electronic gates
- Barrier gates
- Portes corredisses
- Portes automàtiques
- Rolling doors and shutters
- General electrical appliances and home automation systems (e.g., lights, alarm systems, access control systems)
7. Contingut del paquet
El vostre paquet ha de contenir els elements següents:
- 1x Flash Lamp
- 1x Antena
- 2x cargols
- 1x Manual d'usuari en anglès
8. Consells d'usuari
- Muntatge segur: Assegureu-vos sempre la lamp is securely mounted to a stable surface to prevent accidental dislodgement, especially in outdoor environments.
- Verifiqueu el cablejat: Double-check all electrical connections before powering on the device to ensure correct voltage and polarity, preventing damage to the lamp or connected system.
- Col·locació de l'antena: For optimal range, position the antenna away from large metal objects or other sources of interference.
9. Preguntes freqüents (FAQ)
- P: Com connecto el lamp to my gate motor?
- A: Terminal 1 on the lamp is for power input (12-265VAC/DC). You will need to connect this to the appropriate power output terminals on your gate motor control board. Consult your gate motor's manual for specific wiring instructions. Terminal 2 is for the RF controller antenna.
- Q: Can you provide a detailed wiring diagram?
- A: A general installation diagram is provided in Section 4 of this manual. For specific wiring to your gate opener or automation system, please refer to the wiring diagram provided with your gate opener's control board, as connections can vary between models. Always ensure power is off before making connections.
10. Garantia i assistència
This product is manufactured to high-quality standards. For any technical assistance or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
