DATA FROG Wireless Pro Controllers User Manual

Introducció

This manual provides detailed instructions for the DATA FROG Wireless Pro Controllers (Model S80). These controllers are designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, Switch Lite, Switch OLED, iOS, Android, and PC. Please read this manual thoroughly before use to ensure proper operation and to maximize your enjoyment.

Informació de seguretat

• Mantingueu el controlador allunyat de l'aigua i altres líquids.
• No exposar a temperatures extremes ni a la llum solar directa.
• Eviteu deixar caure el controlador ni sotmetre'l a impactes forts.
• No intenteu desmuntar ni modificar el controlador.
• Feu servir només el cable de càrrega proporcionat o un equivalent certificat.
• Mantenir fora de l'abast dels nens petits.

Contingut del paquet

• 2 x DATA FROG Wireless Pro Controllers (Model S80)
• 2 x USB-C Charging Cables (supports data transfer)

Especificacions

Configuració

1. Càrrega del controlador

1. Connect the provided USB-C charging cable to the controller's USB-C port.
2. Connect the other end of the cable to a USB power source (e.g., Nintendo Switch dock, PC, USB wall adapter).
3. The LED indicators on the controller will show charging status. A full charge typically takes about 3 hours.

2. Pairing with Nintendo Switch / Switch Lite / Switch OLED

There are two methods for initial pairing:

1. Method 1 (Using Pairing Button):
   • On your Nintendo Switch console, go to "Controllers" > "Change Grip/Order".
   • Press the small pairing button located on the back of the Pro Controller. The indicator lights will flash.
   • Once paired, the indicator lights will stop flashing and remain lit on the assigned player number.
2. Method 2 (Using Y + HOME Buttons):
   • On your Nintendo Switch console, go to "Controllers" > "Change Grip/Order".
   • Press and hold the 'Y' button and the 'HOME' button simultaneously on the Pro Controller for 3 seconds. The indicator lights will flash.
   • Once paired, the indicator lights will stop flashing and remain lit on the assigned player number.

3. Connecting to PC (Wired Connection Only)

• Connect the controller to your PC using the provided USB-C charging cable.
• The controller will be recognized as a wired gamepad. Wireless functionality is not supported for PC connections.
• Compatible with Windows 7, 8, and 10 for X-Input and Steam games.

4. Connecting to iOS / Android Devices

• Ensure your iOS device is running iOS 13.0 or above.
• Activa el Bluetooth al teu dispositiu iOS/Android.
• Put the controller into pairing mode (refer to Nintendo Switch pairing methods, or consult your device's Bluetooth settings for specific instructions if needed).
• Select the controller from the list of available Bluetooth devices on your phone/tablet.

Instruccions de funcionament

1. Encendre/apagar

• To power on, press the 'HOME' button.
• To power off, press and hold the 'HOME' button for a few seconds until the indicator lights turn off. The controller will also automatically power off after a period of inactivity.

2. Modes de llum LED

The controller features 9-color RGB LEDs on the joysticks with three distinct lighting modes:

• Mode estroboscòpic: Rainbow-colored LEDs flash quickly.
• Mode de respiració: 8 colors of LEDs cycle slowly.
• Mode estàtic: Joysticks maintain a single chosen color.

To switch between modes or turn off the lights, use the dedicated LED light control button (often indicated by a paw print icon or similar, as shown in diagrams).

3. Botons Enrere Programables (M1/M2)

The controller includes two programmable back buttons, M1 and M2, which can be assigned functions from 1-16 basic buttons (A, B, Y, L, ZL, R, ZR, D-pad directions). This allows for more comfortable and efficient gameplay.

1. Press and hold the 'SET' button (usually located near M1/M2) until the indicator light flashes.
2. Press the M1 or M2 button you wish to program.
3. Press the sequence of buttons you want to assign (e.g., A+B+Y).
4. Press the 'SET' button again to save the programming. The indicator light will stop flashing.

4. Funció Turbo

The Turbo function allows for rapid, repeated input of a button press. It can be set to auto or manual mode with adjustable speeds.

1. Configuració del Turbo: Press and hold the 'T' (Turbo) button, then press the desired action button (A, B, X, Y, L, ZL, R, ZR). This activates manual Turbo for that button.
2. Ajust de la velocitat del turbo: Press and hold the 'T' button, then move the Right Analog Stick Up or Down to cycle through the 3 speeds: 5 shots/s, 12 shots/s, or 20 shots/s.
3. Turbo de neteja: Repeat step 1 to deactivate Turbo for a specific button, or press and hold 'T' and the Minus (-) button to clear all Turbo settings.

5. Ajust de la vibració

The dual vibration motors offer four levels of feedback intensity.

• To adjust vibration, press the vibration adjustment button (often located on the back or bottom of the controller, or a combination of buttons).
• Cycle through the levels: None (0%), Weak (25%), Moderate (50%), Strong (100%).

6. Wake-up Function (for Nintendo Switch)

After initial pairing, you can wake up your Nintendo Switch console directly from sleep mode using the controller.

• Simply press the 'HOME' button on the controller. Your console should power on and connect to the controller.

7. Screenshot and Video Capture

• Press the 'Share' button (usually a square icon) to capture screenshots or video clips, depending on the game and console settings.

Manteniment

• Neteja: Feu servir un drap suau i sec per netejar el controlador. No utilitzeu productes químics agressius ni materials abrasius.
• Emmagatzematge: Guardeu el controlador en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Cura de la bateria: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in constant use. If storing for an extended period, charge it to about 50% every few months.

Resolució de problemes

• Controller not connecting/pairing:
  • Assegureu-vos que el controlador estigui carregat.
  • Make sure the console/device's Bluetooth is enabled.
  • Try re-pairing the controller using the instructions in the "Setup" section.
  • If connecting to PC, remember it only supports wired connection.
• Botons que no responen:
  • Comproveu si el controlador està connectat correctament.
  • Restart the controller and the console/device.
  • Assegureu-vos que no hi hagi restes enganxades sota els botons.
• La vibració no funciona:
  • Check the vibration settings on the controller and in the game/console settings. Ensure it's not set to "None".
• LED lights not changing:
  • Ensure you are using the correct button combination to cycle through LED modes.

Consells per a l'usuari

• Connectivitat amb PC: For PC gaming, remember that these controllers operate via a wired USB-C connection only. They do not support wireless Bluetooth connection to a PC.
• Opcions de color: The controllers are available in various aesthetic designs, including "Thunder Light" and "Star Sky" patterns, in addition to standard colors.
• Durada de la bateria: To maximize your 15 hours of play time, consider turning off the LED lights when not needed, as they consume battery power.

Garantia i Suport

For warranty information, technical support, or any questions not covered in this manual, please contact the DATA FROG customer service team through your retailer or the official DATA FROG weblloc. Si us plau, tingueu a punt el model del vostre producte (S80) i els detalls de compra quan us poseu en contacte amb el servei d'assistència.