iTOMA CKS3301U AM/FM Alarm Clock Radio

Introducció

Gràcies per la compraasing the iTOMA CKS3301U AM/FM Alarm Clock Radio. This manual provides detailed instructions for setting up and operating your new device. Please read it carefully to ensure proper use and to enjoy all the features this product offers.

Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

• 1 x iTOMA CKS3301U AM/FM Alarm Clock Radio
• 1 x USB Cable (AC Adapter not included)
• 1 x Manual d'usuari (aquest document)

Configuració

Connexió d'alimentació

1. Connect the provided USB cable to the alarm clock radio.
2. Connecteu l'altre extrem del cable USB a un adaptador de corrent USB compatible (no inclòs) o a un port USB amb alimentació.
3. The unit will power on, and the LED display will illuminate.

Note: An AC adapter is required for operation and is not included in the package. The clock features a DC-3V CR2032 battery backup (not included) to maintain time settings during power outages. Install a CR2032 battery in the designated compartment on the bottom of the unit to utilize this feature.

Instruccions de funcionament

Time Setting (12/24 Hour Format)

The clock allows you to choose between 12-hour and 24-hour time formats.

1. Press and hold the "TIME SET" button (or similar button, usually combined with "MEM/TIME").
2. Use the "TUNE +/-" buttons to adjust the hour.
3. Press "TIME SET" again to confirm the hour and move to minutes.
4. Use the "TUNE +/-" buttons to adjust the minutes.
5. Press "TIME SET" to confirm and exit time setting mode.
6. To switch between 12-hour and 24-hour format, press the "12/24H" button (if available, otherwise it might be part of the time setting sequence). When in 12-hour format, "PM" will be displayed in the afternoon.

Alarm Setting (Dual Alarm)

The clock radio features dual alarms (AL1 and AL2) which can be set independently.

1. Establir hora d'alarma:
   • Press and hold the "AL1" or "AL2" button. The alarm time will flash.
   • Use the "TUNE +/-" buttons to adjust the alarm hour.
   • Press "AL1" or "AL2" again to confirm the hour and move to minutes.
   • Use the "TUNE +/-" buttons to adjust the alarm minutes.
   • Press "AL1" or "AL2" to confirm the alarm time.
2. Select Alarm Source (Buzzer or Radio):
   • After setting the alarm time, press "AL1" or "AL2" repeatedly to cycle through alarm modes: Buzzer, FM Radio, AM Radio, or Off.
   • When selecting radio, the last tuned station will be used.
3. Adjust Alarm Volume (Radio Alarm Only):
   • If you selected a radio alarm, use the "VOL +/-" buttons to set the desired wake-up volume (16 levels available).

Note: The alarm features a crescendo wake-up control, gradually increasing in volume.

Funció de posposar

When an alarm sounds, press the large "SNOOZE" button located on the top of the unit to temporarily silence the alarm for 9 extra minutes of sleep.

Funcionament de ràdio (AM/FM)

The clock radio features both AM and FM bands.

1. Turn On/Off Radio: Press the "FM" or "AM" button to turn on the respective radio band. Press the "POWER" button (or the same FM/AM button again) to turn off the radio.
2. Emissores de sintonització: Use the "TUNE +/-" buttons to manually tune to your desired frequency.
3. Auto Scan/Preset Stations:
   • To auto-scan and save stations, press and hold the "MEM/TIME" button (or a dedicated "SCAN" button if available). The radio will scan and save up to 20 FM and 20 AM stations.
   • To recall saved stations, press the "MEM/TIME" button repeatedly to cycle through the presets.
4. Antena: Extend the external cable antenna for optimal FM reception. For AM reception, rotate the unit for best signal.

Temporitzador de dormir

The sleep timer allows you to fall asleep to the radio, which will automatically turn off after a set duration.

1. While the radio is playing, press the "SLEEP" button.
2. Repeatedly press the "SLEEP" button to cycle through the available sleep timer durations (e.g., 10, 20, 30, 60, 90 minutes, or OFF).
3. La ràdio reproduirà durant el temps seleccionat i després s'apagarà automàticament.

Control dimmer

Adjust the brightness of the orange LED display to your preference.

1. Press the "DIMMER" button (or "SNOOZE/DIMMER" button).
2. Each press will cycle through the 4 brightness levels: High (L-3), Medium (L-2), Low (L-1), and Off.
3. Seleccioneu el nivell de brillantor desitjat per a una comoditat viewing.

Manteniment

• Netegeu la unitat amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Keep the unit away from direct sunlight, extreme temperatures, and high humidity.
• Assegureu-vos una ventilació adequada al voltant de la unitat.
• If the unit will not be used for an extended period, disconnect it from power and remove the backup battery.

Resolució de problemes

Especificacions

Consells per a l'usuari

• For optimal radio reception, ensure the external wire antenna is fully extended and positioned away from other electronics.
• Considera la compraasing a reliable USB power adapter (5V/1A recommended) for consistent power, as it is not included.
• Install a CR2032 backup battery to prevent losing time settings during brief power interruptions.
• Experiment with the 4-level dimmer to find the perfect display brightness for both day and night.

Garantia i Suport

Per obtenir informació sobre la garantia o assistència tècnica, consulteu les polítiques del venedor o poseu-vos en contacte amb el punt de compra. Conserveu el rebut de compra com a comprovant de compra.