Makerbase MKS PI-TS35 3.5 Inch Capacitive Screen User Manual

1. Introducció

Thank you for choosing the Makerbase MKS PI-TS35 3.5 Inch Capacitive Screen. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new display screen. The MKS PI-TS35 is designed to work seamlessly with Makerbase MKS PI and MKS SKIPR boards, offering an intuitive capacitive touch interface for your 3D printer.

2. Configuració i instal·lació

Follow these steps to correctly install your MKS PI-TS35 screen with your Makerbase board.

1. Preparar la junta: Ensure your MKS PI or MKS SKIPR board is powered off before making any connections.
2. Connect the Screen: Locate the dedicated display interface on your Makerbase board (e.g., MKS PI V1.1). Carefully align the MKS PI-TS35 screen connector with the corresponding port on the board and gently push to secure the connection.
3. Connexió d'alimentació: The MKS PI-TS35 screen typically draws power directly from the connected Makerbase board. Ensure your main board receives a stable DC12-24V power input.
4. Optional HD Screen: If you plan to use an additional HD screen, connect it to the HD interface on your Makerbase board as shown in the diagram below.

3. Instruccions de funcionament

The MKS PI-TS35 features a capacitive touch screen for intuitive interaction with your 3D printer's firmware interface.

1. Encès: After connecting the screen and ensuring proper power supply to your Makerbase board, power on the system. The screen should initialize and display the user interface.
2. Interfície tàctil: Use your finger to navigate through the menus and options displayed on the screen. The capacitive touch technology provides a responsive and smooth user experience.
3. Funcions bàsiques: Depending on your 3D printer's firmware, you will typically find options for:
   • Monitoring temperatures (extruder, heated bed)
   • Controlling printer movements (homing, axis control)
   • Managing print jobs (start, pause, stop)
   • Accessing printer settings and configurations

4. Manteniment

To ensure the longevity and optimal performance of your MKS PI-TS35 screen, follow these simple maintenance guidelines:

• Neteja: Utilitzeu un drap suau i sense pelusa lleugerament dampened with water or a screen-specific cleaning solution to clean the display surface. Avoid using abrasive materials, alcohol, or harsh chemical cleaners, as these can damage the screen.
• Manipulació: Avoid applying excessive pressure to the screen. Do not use sharp objects to interact with the touch surface.
• Medi ambient: Operate the screen within recommended temperature and humidity ranges. Protect it from direct sunlight and extreme temperatures.

5. Solució De Problemes

If you encounter issues with your MKS PI-TS35 screen, try the following steps:

• La pantalla no es mostra:
  • Check all cable connections between the screen and the Makerbase board to ensure they are secure.
  • Verify that the Makerbase board is receiving adequate power (DC12-24V).
  • Ensure the firmware on your Makerbase board is correctly configured to support the MKS PI-TS35 screen.
• Pantalla tàctil que no respon:
  • Gently clean the screen surface to remove any dirt or debris that might interfere with touch detection.
  • Restart the 3D printer system.
  • Confirm that the screen's drivers are correctly installed and recognized by the firmware.
• Pantalla parpellejant:
  • Comproveu l'estabilitat de la font d'alimentació.
  • Assegureu-vos que els cables no estiguin danyats ni solts.

6. Especificacions

7. Consells d'usuari

• Comproveu el contingut del paquet: Upon receiving your MKS PI-TS35, carefully check the package to ensure all necessary cables and components are included. If any cables are missing, contact your seller for assistance.
• Compatibilitat de firmware: Always ensure your MKS PI or MKS SKIPR board is running the latest firmware version that supports the MKS PI-TS35 screen for optimal performance and feature access.
• Manipulació suau: The capacitive screen is sensitive. Handle it with care and avoid dropping or subjecting it to strong impacts.

8. Garantia i Suport

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the official Makerbase support channels. Keep your purchase receipt or order details handy as proof of purchase.