Introducció
This manual provides instructions for the installation and maintenance of the fuel tank cap cable for Toyota Hilux models manufactured between 2016 and 2021. This cable is designed to secure the fuel cap to the vehicle, preventing loss or misplacement during refueling.
Please ensure you have the correct part number for your vehicle's configuration (Left-Hand Drive or Right-Hand Drive) before proceeding with installation.
Especificacions
| Característica | Detall |
|---|---|
| Condició | Nou a estrenar |
| Mida de l'article | Estàndard |
| OE Number (LHD) | 77035-0k460 |
| OE Number (RHD) | 77035-0k500 |
| Vehicles aplicables | Toyota Hilux (2016-2021) |
| Origen | Xina continental |
Instruccions d'instal·lació
Before beginning, ensure the vehicle is parked on a level surface and the engine is off. It is recommended to consult a professional mechanic if you are unsure about any steps.
- Identify the Correct Part: Verify that the OE number on your new cable matches the required specification for your Toyota Hilux (LHD 77035-0k460 or RHD 77035-0k500).
- Access the Fuel Filler Area: Open the fuel filler door. Depending on your vehicle's specific trim, you may need to remove a few plastic clips or screws to gain better access to the existing cable or its mounting points.
- Remove the Old Cable (if applicable): Carefully detach the old fuel tank cap cable from both the fuel cap and the vehicle body. Note how the old cable was routed and secured.
- Attach the New Cable to the Fuel Cap: Connect one end of the new cable to the fuel cap. Ensure it is securely fastened according to the cap's design.
- Encamina el cable: Route the cable along the same path as the original, ensuring it does not interfere with the fuel filler door mechanism or other components. Refer to Figure 3 for a general routing guide.
- Attach the New Cable to the Vehicle Body: Secure the other end of the cable to the designated mounting point within the fuel filler area. This typically involves a clip or a small anchor point.
- Funcionalitat de prova: Gently pull on the fuel cap to ensure the cable is securely attached and has enough slack to allow the cap to be removed and replaced without strain, but not so much that it can get caught. Close and open the fuel filler door to confirm proper operation.
- Torneu a muntar: Reinstall any removed trim pieces, clips, or screws.
Funcionament
The fuel tank cap cable operates passively. Its primary function is to keep the fuel cap tethered to the vehicle when removed for refueling. Simply remove the fuel cap as usual, and the cable will prevent it from being dropped or left behind. When finished, replace the fuel cap and close the fuel filler door.
Manteniment
- Inspecció periòdica: Periodically inspect the fuel tank cap cable for any signs of wear, fraying, cracks, or damage, especially at the attachment points.
- Neteja: Keep the cable and its attachment points free from dirt, debris, and fuel spills.
- Encaminament adequat: Ensure the cable remains properly routed and is not pinched or rubbing against sharp edges, which could lead to premature wear.
- Substitució: If any damage is observed, replace the cable promptly to maintain its intended function.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Fuel cap cable is broken or detached. | Wear and tear, improper installation, accidental damage. | Replace the cable with a new one, ensuring secure attachment at both ends. |
| Fuel cap cable interferes with fuel filler door. | Incorrect routing of the cable. | Re-route the cable, ensuring it has sufficient slack and clearance from moving parts. |
| Fuel cap feels loose or insecure after cable installation. | Cable not properly attached to the cap or mounting point. | Re-check all attachment points for secure fastening. Ensure the cap itself is functioning correctly. |
Consells per a l'usuari
- Verificar la compatibilitat: Always double-check the OE number and vehicle compatibility (LHD/RHD) before purchasing and installing. If unsure, provide your vehicle's identification number (VIN) to a parts specialist for verification.
- Manipulació suau: Avoid excessive pulling or tugging on the fuel cap cable, as this can cause premature wear or breakage.
Suport
For any questions regarding this product, installation, or if you encounter issues not covered in this manual, please contact the seller or a qualified automotive technician for assistance.
