Introducció
This manual provides comprehensive instructions for the safe and efficient operation of your Spectra SP20 LED Aquarium Light. Designed for both salt and fresh water aquariums under 45cm, this 20W full-spectrum light offers adjustable dimming and timing functions to create an optimal environment for your aquatic life.
Instruccions de seguretat
- Assegureu-vos que la font d'alimentació coincideixi amb el volum d'entrada especificattage (AC 100-240V).
- No submergiu el llum ni l'adaptador de corrent a l'aigua.
- Always unplug the device before performing any maintenance or cleaning.
- Mantenir fora de l'abast dels nens i mascotes.
- Operate within the specified working temperature range of 0°C to 40°C.
- No intenteu desmuntar ni reparar la unitat vosaltres mateixos. Poseu-vos en contacte amb personal qualificat per al servei tècnic.
Guia de configuració
- Desembalar: Traieu amb cura tots els components de l'embalatge.
- Tria la ubicació: Select a suitable location on your aquarium for the light. The light is designed for tanks less than 45cm in length.
- Adjunta l'aparell: The Spectra SP20 features a clip-on fixture. Securely attach the clamp to the rim of your aquarium. The clamp can accommodate a maximum thickness of 15mm.
- Ajust de posició: Utilize the flexible rubber metal bracket to adjust the light head's position and angle over your aquarium as desired.
- Connectar l'alimentació: Plug the power adapter into a suitable electrical outlet. Ensure the correct plug type (US Plug or EU Plug) is used for your region.
- Verificar el funcionament: Once connected, the light is ready for operation.
Instruccions de funcionament
The Spectra SP20 LED Aquarium Light features an inline remote control for power, dimming, and timing functions.
Encès/apagat
- Premeu el botó ON/OFF button once to temporarily turn the power on or off.
- If the timer is active, pressing ON/OFF will restore the output without affecting the timing function.
Funció d'apagada
Adjust the intensity and color spectrum using Dimming Channel A and B buttons.
- Premeu el botó A or B to adjust the intensity.
- Each channel can be adjusted in 10% increments.
Funció de temporització
The timing button is used to control the lighting period and cycle operation. This function overrides manual ON/OFF for scheduled operation.
- Premeu una vegada: The red indicator light turns on. The timer is set for 6 hours ON and 18 hours OFF.
- Premeu dues vegades: The green indicator light turns on. The timer is set for 8 hours ON and 16 hours OFF.
- Premeu tres vegades: The blue indicator light turns on. The timer is set for 10 hours ON and 14 hours OFF.
- Premeu quatre vegades: All indicator lights turn off, and the timer is permanently deactivated.
Note: The ON/OFF button only temporarily controls power and does not affect the timing function once set. The timing function controls the overall lighting schedule.
Manteniment
- Neteja: Regularly wipe the light fixture and LEDs with a soft, dry cloth to remove dust and water spots. Ensure the device is unplugged before cleaning.
- Dissipador de calor: The light features a built-in aluminum heat sink for efficient cooling. Ensure the vents on the top of the light head are not obstructed to maintain proper airflow and quiet operation.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Sense corrent, connexió fluixa, adaptador defectuós. | Comproveu la presa de corrent i assegureu-vos que totes les connexions estiguin ben connectades. Proveu una altra presa de corrent. |
| Dimming/Timing functions not responding. | Remote control issue, timing function already active. | Ensure the remote is pointed at the sensor (if applicable). If a timing cycle is active, the ON/OFF button will not cancel it, only temporarily pause/resume. Deactivate timing by pressing the timing button four times. |
| La llum parpelleja o és inconsistent. | Unstable power supply, internal fault. | Check power connections. If problem persists, discontinue use and contact support. |
Especificacions
| Característica | Detall |
|---|---|
| Model | SP20 |
| Entrada Voltage | AC 100-240V |
| Freqüència de treball | 50/60Hz |
| Alimentació LED | 20W Max (4 x 5W LEDs) |
| Quantitat de LED | 4 PCS |
| Temperatura de treball | 0 °C a 40 °C |
| Light Head Size | φ90 mm x 25 mm |
| Longitud del braç | 235 mm |
| Cl màximamp Gruix | 15 mm |
| Mida recomanada del dipòsit | <45 cm |
| Tipus d'aplicació | Fish (Salt or Fresh Water) |
| Tipus de fixació | Clip-On |
| Bateria inclosa | No |
| Substància química molt preocupant | Cap |
| Origen | Xina continental |
| Dimensions del paquet (L x W x H) | 18 cm x 16 cm x 5 cm |
| Pes del paquet | 0.346 kg |
Configuracions LED
The Spectra SP20 is available in configurations optimized for different aquarium types:
- Aigua dolça: Features white and yellow LEDs for optimal plant growth and natural coloration.
- Salt Water: Features blue and white LEDs to enhance coral fluorescence and mimic deep-sea conditions.
Consells per a l'usuari
- For optimal plant growth in freshwater tanks, ensure the light is positioned to provide even coverage.
- In saltwater tanks, experiment with dimming levels to achieve the desired aesthetic and coral response.
- Utilize the timing function to establish a consistent day/night cycle for your aquarium inhabitants, promoting their health and natural behaviors.
Garantia i Suport
For any issues or questions regarding your Spectra SP20 LED Aquarium Light, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims.
