VGR V-640 Professional Barber Combo

Introducció

The VGR V-640 Professional Barber Combo is a versatile grooming kit designed for precise and efficient hair cutting. This combo includes both a cordless hair clipper and a hair trimmer, featuring high-performance motors, durable blades, and convenient charging options. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your VGR V-640 combo.

Instruccions importants de seguretat

Per reduir el risc de descàrrega elèctrica, lesions o danys, seguiu sempre aquestes precaucions de seguretat bàsiques:

• Llegiu totes les instruccions abans d'utilitzar l'aparell.
• Mantingueu l'aparell sec. No l'utilitzeu a prop de l'aigua ni en condicions humides.
• No submergiu l'aparell en aigua o altres líquids.
• Desconnecteu sempre l'aparell de la presa de corrent immediatament després d'utilitzar-lo i abans de netejar-lo.
• Mantenir l'aparell fora de l'abast dels nens.
• Feu servir només el cable de càrrega que s'inclou amb l'aparell.
• Do not operate the appliance if it has a damaged cord or plug, or if it is not working properly.
• Avoid placing the appliance where it can fall into a tub or sink.
• No utilitzeu accessoris no recomanats pel fabricant.

Contingut del paquet

Si us plau, reviseu el paquet per assegurar-vos que tots els articles hi són i estan en bon estat:

• 1 x maquineta de cabell
• 1 x Hair Trimmer
• 3 x Cutting Guide Combs for Trimmer (1mm, 2mm, 3mm)
• 6 x Cutting Guide Combs for Clipper (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
• 1 x cable de càrrega USB
• 1 x raspall de neteja
• 1 x manual d'instruccions

Especificacions

Configuració

1. Càrrega inicial

Before first use, fully charge both the hair clipper and trimmer. Connect the USB charging cable to the device and a suitable USB power adapter (DC 5V 1A recommended). The LED display will indicate the charging status. The trimmer requires approximately 2.5 hours for a full charge, and the clipper requires 3 hours.

2. Col·locació de les pintes guia

Select the desired cutting length by choosing the appropriate guide comb. Align the comb with the blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.

• Trimmer Guide Combs: 1 mm, 2 mm, 3 mm
• Clipper Guide Combs: 1.5 mm, 3 mm, 4.5 mm, 6 mm, 9 mm, 12 mm

3. Adjusting the Taper Lever (Clipper Only)

The clipper features an adjustable taper lever on the side, allowing for fine-tuning of cutting lengths between 0.5mm and 2.5mm without changing guide combs. Move the lever up for a shorter cut and down for a longer cut.

Instruccions de funcionament

1. Encendre/apagar

Locate the ON/OFF switch on the device. Slide the switch to the 'ON' position to power on the clipper/trimmer. Slide it to the 'OFF' position to turn it off.

2. Using the Clipper/Trimmer

• Tallador de cabells: Ideal for general haircuts and fading. Attach the desired guide comb and adjust the taper lever for precise length control. Move the clipper against the direction of hair growth for an even cut.
• Retolador de cabells: Perfect for detailing, outlining, and trimming beards or mustaches. Use without a guide comb for a close trim (less than 0.5mm) or with the smaller guide combs for specific lengths.

The devices feature a dual-speed motor with up to 9000 RPM for efficient cutting. They can be used for both wet and dry haircuts.

3. Demostració en vídeo

For a visual guide on operating the VGR V-640 Professional Barber Combo, please watch the official product demonstration video below.

Manteniment

1. Neteja de les fulles

After each use, turn off and unplug the device. Use the provided cleaning brush to remove any loose hairs from the blades. The blades are designed for washing under water; however, ensure the main body of the device does not get wet if it's not explicitly rated as waterproof. Dry the blades thoroughly after washing.

2. Lubricació

Regular lubrication helps maintain blade performance and longevity. Apply a small drop of clipper oil (not included due to airline regulations) to the blades after cleaning, especially if washing them with water. Run the device for a few seconds to distribute the oil evenly.

3. Emmagatzematge

Store the clipper and trimmer in a cool, dry place, away from direct sunlight and moisture. Ensure the devices are clean and fully charged before storing for extended periods.

Resolució de problemes

• El dispositiu no s'encén: Ensure the battery is charged. Connect to the USB charging cable and allow sufficient time to charge.
• Mal rendiment de tall: Clean the blades thoroughly to remove any hair buildup. Ensure the blades are properly lubricated. If performance does not improve, the blades may be dull and require replacement (contact support for options).
• Soroll o vibració excessius: This can sometimes be caused by hair trapped in the blade mechanism or insufficient lubrication. Clean and oil the blades. If the issue persists, discontinue use and contact support.

Consells per a l'usuari

• Always ensure the blades are clean and oiled before each use for optimal performance and to prevent pulling hair.
• When using guide combs, start with a longer comb length than you think you need, and gradually reduce it to achieve your desired style.
• For a smoother cut, stretch the skin taut while moving the clipper/trimmer against the direction of hair growth.
• The LED display is useful for monitoring battery life, so keep an eye on it to avoid interruptions during grooming sessions.

Garantia i Suport

All VGR products come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use.

If the item is damaged during shipping or if you encounter any issues with your product, please contact the seller or VGR customer support directly. Provide details of the issue and any relevant purchase information. They will review your situation and provide appropriate assistance or a solution.