QS-Zigbee/WiFi-CP03 Smart Curtain Switch Module User Manual

1. Introducció

The QS-Zigbee/WiFi-CP03 Smart Curtain Switch Module is an intelligent device designed to transform your traditional curtain switches into smart, app-controlled systems. This module allows you to remotely open or close your curtains from anywhere using your mobile phone, set schedules, and integrate with popular voice assistants like Amazon Alexa and Google Home. It is available in both Zigbee 3.0 and Wi-Fi 2.4GHz versions to suit your smart home ecosystem.

2. Informació de seguretat

• Desconnecteu sempre l'alimentació a l'interruptor automàtic abans de la instal·lació, el manteniment o la retirada del dispositiu.
• La instal·lació l'ha de dur a terme un electricista qualificat o d'acord amb les normes elèctriques locals.
• Ensure the module's input voltagEls valors nominals i de corrent coincideixen amb el vostre sistema elèctric.
• No exposeu el dispositiu a la humitat ni a temperatures extremes.
• Mantenir fora de l'abast dels nens.

3. Producte acabatview

The module is a compact device designed to be installed behind your existing curtain switch. It enables smart control without replacing your traditional switch. The package includes:

• 1 x Smart Curtain Switch Module (QS-Zigbee-CP03 or QS-WiFi-CP03)

Figure 3.1: QS-Zigbee-CP03 Module Front View amb especificacions

Figure 3.2: QS-WiFi-CP03 Module Front View amb especificacions

4. Especificacions

5. Configuració

5.1 Instal·lació del cablejat

Important: Ensure power is disconnected at the circuit breaker before proceeding with wiring. This module requires a neutral wire for operation.

1. Turn off the main power supply to the circuit where you intend to install the module.
2. Traieu l'interruptor de cortina existent de la caixa de paret.
3. Identify the Live (L), Neutral (N), and motor control wires (typically Up, Down, and Common/Stop). The module has terminals labeled N, L, and three output terminals for motor control.
4. Connect the Live wire from your power supply to the 'L' terminal on the module.
5. Connect the Neutral wire from your power supply to the 'N' terminal on the module.
6. Connect the motor control wires from your curtain motor to the corresponding output terminals on the module. Refer to the diagrams below for typical connections.
7. Connect the traditional curtain switch wires to the module's input terminals for manual control, if desired.
8. Carefully place the module and wiring back into the wall box, ensuring no wires are pinched.
9. Resta l'alimentació al disjuntor.

Figure 5.1: Wiring Diagram for Curtain Switch Module

Figure 5.2: Module Integration Behind a Traditional Switch

5.2 Vinculació d'aplicacions

To control your curtain module via smartphone, you need to pair it with the Tuya Smart app.

1. Descarrega't el Tuya Smart aplicació des de l'App Store (iOS) o Google Play Store (Android).
2. Registra't o inicia la sessió al teu compte de Tuya Smart.
3. For Zigbee Module (QS-Zigbee-CP03): Ensure you have a Zigbee gateway connected to your Tuya Smart app. The module requires a Zigbee gateway to function.
4. For WiFi Module (QS-WiFi-CP03): Assegureu-vos que el vostre telèfon intel·ligent estigui connectat a una xarxa Wi-Fi de 2.4 GHz.
5. Open the Tuya Smart app and tap the '+' icon in the top right corner to add a device.
6. Select 'Curtain Switch' or 'Curtain Module' from the device list.
7. Follow the in-app instructions to put the module into pairing mode. This usually involves pressing the 'Reset' button on the module for a few seconds until an indicator light blinks rapidly.
8. Confirm the indicator status in the app and proceed with pairing.
9. Un cop afegit correctament, podeu canviar el nom del dispositiu i assignar-lo a una habitació.

6. Instruccions de funcionament

Figura 6.1: Característiques clauview

6.1 Control APP

• Obrir tancar: Use the virtual buttons in the Tuya Smart app to fully open or close your curtains.
• Ajusta l'alçada: The app allows you to set the curtain to any desired opening percentage.
• Pausa: Stop the curtain movement at any point.

6.2 Control de veu

The module is compatible with Amazon Alexa and Google Home. After linking your Tuya Smart account to your voice assistant, you can use voice commands:

• "Alexa, obre les cortines de la sala d'estar."
• "Ei Google, tanca les persianes del dormitori."
• "Alexa, set the kitchen curtain to 50%."

6.3 Timing and Schedule

Set up automated schedules for your curtains:

• In the Tuya Smart app, navigate to the device settings and select 'Schedule' or 'Timer'.
• Crea nous horaris per obrir o tancar les cortines a hores específiques (per exemple, obrir a les 7:00, tancar a les 9:00).
• You can also set routines based on sunrise/sunset or other smart home triggers.

6.4 Device Sharing and Group Function

• Compartició de dispositius: Share control of the curtain module with other family members through the Tuya Smart app. They will need their own Tuya accounts.
• Funció de grup: If you have multiple curtain modules, you can group them together in the app to control them simultaneously with a single command (e.g., open all downstairs curtains).

Figura 6.2: Escenaris d'aplicació

7. Manteniment

• Mantingueu el mòdul net i lliure de pols. Feu servir un drap sec i suau per netejar-lo.
• Reviseu periòdicament les connexions del cablejat per assegurar-vos que estiguin ben fixades.
• Ensure the module is not exposed to water or excessive humidity.
• Update the Tuya Smart app regularly to ensure compatibility and access to the latest features.

8. Solució De Problemes

9. Garantia i Suport

For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.