Introducció
Thank you for choosing the CYCLAMI A3 Max Portable Electric Bike Pump. This compact and powerful device is designed to provide convenient and accurate tire inflation for various applications, including road bikes, mountain bikes, and other inflatables. Featuring a digital PSI display, high-pressure capability, and a rechargeable battery, the A3 Max ensures your tires are always at optimal pressure. Please read this manual thoroughly before use to ensure safe and efficient operation.
Informació de seguretat
- Mantingueu el dispositiu lluny dels nens.
- Do not operate the pump in wet conditions or immerse it in water. The device is not water-resistant.
- Eviteu l'exposició prolongada a la llum solar directa o a temperatures extremes.
- Do not block the air inlet/outlet during operation to prevent overheating.
- Assegureu-vos de la configuració de pressió correcta per a l'article que s'infla per evitar un inflat excessiu i possibles danys o lesions.
- No desmunteu ni intenteu reparar el dispositiu vosaltres mateixos. Contacteu amb l'assistència al client per obtenir assistència.
- Feu servir només el cable de càrrega i els adaptadors proporcionats.
- The device may become warm during extended use. Allow it to cool down if the overheating protection activates.
Contingut del paquet
Si us plau, reviseu el paquet per assegurar-vos que hi ha tots els elements:
- 1 x CYCLAMI A3 Max Pump
- 1 x Caixa d'embalatge
- 1 x Silicone Cover
- 1 x TYPE-C USB Charging Cable
- 1 x SV Valve (Presta Valve)
- 1 x FV Valve (Dunlop Valve)
- 1 x agulla de bola
- 1 x Inflatable Hose (SV compatible)
- 1 x Adapter (FV compatible)
- 1 x VELCRO STRAPS
Producte acabatview
The CYCLAMI A3 Max is a feature-rich portable electric pump designed for ease of use and reliability.
Característiques principals:
- Pantalla digital LCD: Provides clear, real-time pressure readings.
- Capacitat d'alta pressió: Inflates up to 150 PSI.
- Potent flux d'aire: Delivers 25 L/min for quick inflation.
- Bateria recarregable: Built-in 3*600mAh (1800mAh total) power cells.
- Espera automàtica: Conserves battery when not in use.
- Protecció contra el sobreescalfament: Automatically shuts off to prevent damage from excessive heat.
- Real-time Tire Pressure Gauge: Monitors pressure accurately during inflation.
- Compatibilitat versàtil de vàlvules: Supports Schrader, Presta (SV), and Needle valves with included adapters.
- Disseny ultralleuger: Weighs approximately 210g for easy portability.
- Càrrega ràpida: Fully charges via Type-C USB in approximately 1 hour and 12 minutes.
- Funcionament de baix soroll: Operates at ≤65dB.
- Construcció duradora: Anodized aluminum shell with a one-piece airtight core and copper core outlet material.
Configuració
1. Càrrega inicial
Before first use, fully charge the CYCLAMI A3 Max pump. Connect the provided Type-C USB cable to the pump's charging port and plug the other end into a compatible USB power adapter (not included). The charging time is approximately 1 hour and 12 minutes for a full charge.
2. Attaching the Inflatable Hose and Adapters
- Screw the inflatable hose securely onto the pump's air outlet.
- Identify the valve type of the item you wish to inflate (e.g., Schrader, Presta, Needle).
- Attach the appropriate adapter to the end of the inflatable hose. For Presta valves, use the SV adapter. For Dunlop valves, use the FV adapter. For balls, use the ball needle.
Instruccions de funcionament
1. Powering On and Connecting
- Press the power button to turn on the pump. The LCD digital display will light up.
- Connect the assembled hose and adapter firmly to the valve of the item you want to inflate. The pump will display the current pressure of the item.
2. Establiment de la pressió objectiu
- Use the '+' and '-' buttons on the pump to adjust the desired target pressure (PSI or BAR). The pump supports a pressure range of 0-150 PSI.
- Refer to the recommended pressure for your tires or inflatable items.
3. Starting and Stopping Inflation
- Once the target pressure is set, press the inflation button (often the power button or a dedicated start button) to begin inflation.
- La bomba s'aturarà automàticament quan s'assoleixi la pressió objectiu.
- You can manually stop inflation at any time by pressing the inflation button again.
- After inflation, carefully disconnect the hose from the valve.
Manteniment
- Neteja: Netegeu l'exterior de la bomba amb un drap suau iamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Emmagatzematge: Store the pump and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cura de la bateria: For optimal battery life, charge the pump regularly, even if not in frequent use. Avoid completely draining the battery for extended periods.
- Mànega i adaptadors: Ensure the inflatable hose and adapters are clean and free from debris before and after each use. Check for any signs of wear or damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no s'encén. | Bateria baixa o sense càrrega. | Charge the pump fully using the Type-C USB cable. |
| Pump stops during inflation. | Protecció contra sobreescalfament activada. | Allow the pump to cool down for a few minutes before resuming use. Ensure air inlets/outlets are not blocked. |
| Pump is running but not inflating. | Hose or adapter not securely connected; incorrect adapter used; valve issue on item. | Ensure all connections are tight. Verify you are using the correct adapter for the valve type. Check the item's valve for damage. |
| Lectura de pressió inexacta. | Connexió fluixa; problema amb el sensor. | Ensure the hose and adapter are securely connected. If the problem persists, contact customer support. |
Especificacions
| Característica | Especificació |
|---|---|
| Pressió màxima | 150 PSI |
| Capacitat de la bateria | 3 * 600mAh (1800mAh total) |
| Barometric Flow | 25 L / Min |
| Tire Gauge Accuracy | Real time ±1.5 PSI |
| Rang de configuració de pressió | 0-150 PSI |
| Dimensions | 80 * 50 * 33 mm |
| Pes | ≈210 g |
| Valve Switching | Dedicat |
| Airtight Cores | D'una sola peça |
| Material de closca | Alumini anoditzat |
| Soroll corrent | ≤65dB |
| Standby automàtic | Sí |
| False Start Recognition | Sí |
| Protecció contra sobreescalfament | Sí |
| Inflation Speed (0-120 PSI) | 100 segons |
| Temps de càrrega | Type-C, 1 hour 12 minutes |
| Mode de funcionament | Mechanical keypad (3 buttons) |
| Material de sortida | Nucli de coure |
| Certificacions | CE, FCC, RoHS |
| Tipus | Elèctric |
| Origen | Xina continental |
Consells per a l'usuari
- Check Tire Pressure Regularly: Even if not inflating, use the pump's digital gauge to check tire pressure before each ride for safety and optimal performance.
- Pre-set Pressure: Always pre-set your desired pressure before starting inflation to avoid over-inflation.
- Exposició a l'aigua: The pump is not designed to be water-resistant. Avoid using it in rain or exposing it to excessive moisture to prevent damage.
- Porta amb cura: Utilize the included silicone cover and velcro straps for protection and secure transport, especially during outdoor activities.
Garantia i Suport
The CYCLAMI A3 Max Portable Electric Bike Pump comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions regarding the product, please contact the seller or CYCLAMI customer service directly. Please retain your proof of purchase for warranty purposes.
