Manual d'instruccions de l'entrenador de bicicleta intel·ligent ThinkRider X2Max

1. Introducció

The ThinkRider X2Max Smart Bike Trainer is a high-performance direct drive rheostatic trainer designed to elevate your indoor cycling experience. It features a built-in power meter, offering accurate and true riding data including cadence, speed, and power. Compatible with most cycling software and systems, the X2Max provides a realistic and immersive training environment with its 18% climb simulation and up to 2000W analog power.

The ThinkRider X2Max Smart Bike Trainer ready for use.

2. Contingut del paquet

Marqueu la casella per als elements següents:

• 1 x X2 Smart Bike Trainer
• 1 x adaptador de corrent
• 1 x 8-9-10 Speed Washer
• Quick Release Adapters (Supports 130/135mm)
• Thru Axle Adapters (Supports 142/148mm)
• 1 x manual d'instruccions

Note: One of the thru axle adapters is pre-installed on the equipment and is therefore not included separately in the package.

All components included in the ThinkRider X2Max package.

3. Guia de configuració

Follow these steps to set up your ThinkRider X2Max Smart Bike Trainer:

1. Unfold the Trainer Legs: Place the trainer on a stable, flat surface. Unfold the support legs to ensure maximum stability.
2. Connectar l'alimentació: Plug the power adapter into the trainer and then into a suitable power outlet.
3. Install Cassette (if not already installed): The trainer does not include a cassette. You will need to use a compatible cassette from your bicycle or purchase one separately. For 8, 9, or 10-speed cassettes, use the provided washer. For 7-speed bikes, you may need 1-2 additional gaskets (not included). Shimano 12V cassettes can be installed directly. SRAM 12V requires a separately purchased XDR freehub.
4. Mount Your Bicycle:
   • For Quick Release (130/135mm): Use the quick release adapters.
   • For Thru Axle (142/148mm): Use the thru axle adapters. One thru axle adapter is already installed on the trainer.

   Carefully align your bicycle's rear dropout with the trainer's axle and secure it firmly. Ensure the chain is properly seated on the cassette.
5. Comprovar l'estabilitat: Once the bike is mounted, gently rock it to ensure it is stable and securely attached to the trainer.

Video demonstrating the easy installation and use of the ThinkRider X2Max Smart Bike Trainer.

Illustration of the pre-installed thru axle adapter.

4. Instruccions de funcionament

The ThinkRider X2Max Smart Bike Trainer is designed for an interactive indoor cycling experience.

4.1. Connectivitat

The trainer supports both BLE (Bluetooth Low Energy) and ANT+ wireless communication protocols, allowing it to connect with a wide range of devices and cycling software.

4.2. Compatibilitat del programari

The X2Max is compatible with most popular indoor training applications, including:

• Onelap
• Zwift
• Kinomap
• BKOOL Cycling
• Rouvy
• Wahoo SystemX
• FulGaz
• TrainerRoad
• ThinkRider (official app)

It is also compatible with smart cycling computers such as Garmin and Bryton, and operates on Windows, Android, and Apple systems.

The ThinkRider X2Max is compatible with a wide range of cycling software and systems.

4.3. Data and Features

• Built-in Power Meter: Provides accurate power data with an error margin of ±2%.
• Cadence and Speed Data: The trainer provides full-featured data on pedal frequency (cadence), speed, and power without the need for external sensors.
• Mode ERG: The trainer supports ERG mode for structured workouts.
• Climb Simulation: Experience realistic climbs with up to 18% gradient simulation.
• Potència de resistència: Capable of simulating up to 2000W of resistance.

The X2Max provides comprehensive riding data.

4.4. Calibració

To calibrate your ThinkRider X2Max, download the 'ThinkRider Tools' application from www.thinkrider.com.

4.5. Virtual Shifting (Optional Accessory)

The VS200 Virtual Shifting Kit is available as an optional accessory. Configure it using ThinkRider Tools before first use to enable smooth virtual shifting. Once configured, the VS200 controller can connect directly to the smart trainer without additional software.

Optional VS200 Virtual Shifting Kit for enhanced control.

5. Manteniment

To ensure the longevity and optimal performance of your ThinkRider X2Max Smart Bike Trainer, follow these maintenance guidelines:

• Neteja: Regularly wipe down the trainer with a dry or slightly damp cloth to remove dust and sweat. Avoid using harsh chemicals or abrasive cleaners.
• Emmagatzematge: When not in use, store the trainer in a dry, cool place away from direct sunlight and extreme temperatures. The trainer features a thin body and a handle for easy portability and storage.
• Nivell de soroll: The X2Max is designed for quiet operation. At a riding speed of 30km/h, the noise level is approximately 56-57 decibels, ensuring it does not disturb others.
• Inspeccions: Reviseu periòdicament totes les connexions i elements de fixació per assegurar-vos que estiguin ben fixats.

The X2Max features a thin body and handle for easy transport.

The trainer operates quietly, minimizing disturbance.

6. Solució De Problemes

If you encounter issues with your ThinkRider X2Max, refer to the following common problems and solutions:

• Trainer not recognized by software (ANT+ or Bluetooth):
  • Ensure the trainer is powered on.
  • Check that your ANT+ dongle or Bluetooth is enabled on your device.
  • Verify that the cycling software is correctly configured to search for trainers.
  • Try restarting the trainer and your device.
• Inaccurate Power Data:
  • Perform a calibration using the 'ThinkRider Tools' app (www.thinkrider.com).
  • Ensure your bike's chain and drivetrain are clean and well-maintained.
• Unusual Noise/Buzzing:
  • Check that your bicycle is securely mounted to the trainer.
  • Ensure all components, especially the cassette and adapters, are properly installed and tightened.
  • Verify that the trainer is on a flat and stable surface.
  • A slight hum is normal during operation, especially at higher speeds.
• No Slope Percentage Displayed in Software:
  • Confirm that the cycling software you are using supports gradient simulation and that the feature is enabled in its settings.
  • Ensure the trainer is properly connected and communicating with the software.
• Trainer not working without power:
  • The ThinkRider X2Max is a smart trainer and requires a 12V power supply for full functionality, including resistance control and data transmission. It cannot be used as a passive trainer without being plugged in.

7. Especificacions

Dimensions of the X2Max trainer.

8. Consells d'usuari

Here are some helpful tips from other users:

• Compatibilitat de casset: Remember that the cassette is not included. Ensure you have a compatible cassette for your bike, or purchase one separately.
• 7-Speed Bikes: If using a 7-speed bike, you may need to acquire 1-2 additional spacers/gaskets for proper cassette fitment, as only one 8-9-10 speed washer is provided.
• SRAM 12V Users: For SRAM 12V setups, a separate XDR freehub is required.
• La calibració és clau: Regularly calibrate your trainer using the 'ThinkRider Tools' app for the most accurate power readings.
• Comproveu les connexions: If you experience connectivity issues with ANT+, ensure your ANT+ dongle is properly installed and recognized by your computer/device.

9. Garantia i Suport

9.1. Informació de la garantia

The ThinkRider X2Max Smart Bike Trainer comes with a 2-year warranty period. For issues beyond the warranty period, you can contact customer service to inquire about purchasing repair parts.

9.2. Assistència addicional

For detailed instructions, troubleshooting, and software downloads, please refer to the official user manual (PDF) available at ThinkRider X2Max User Manual (PDF) or visit the ThinkRider weblloc a www.thinkrider.com.