Manual d'usuari de l'interruptor de llum intel·ligent Wi-Fi sense cable neutre BroadLink LC1 UK

1. Introducció

The BroadLink LC1 UK Smart Light Switch is a Wi-Fi enabled touch switch designed for modern smart homes. It offers convenient control over your lighting, integrating seamlessly with popular voice assistants and smart home platforms. A key feature is its 'no neutral wire required' design, ensuring compatibility with a wide range of existing electrical installations.

Note: An BroadLink S3 Hub is required for the smart light switch to function. Each S3 Hub can connect up to 8 BroadLink devices.

2. Informació de seguretat

Please read and understand all safety instructions before installation and use. Improper installation can be dangerous or illegal. Always consult a qualified electrician if you are unsure about any part of the installation process.

• Ensure power is turned OFF at the circuit breaker before installation.
• No instal·leu amb les mans mullades.
• Do not exceed the maximum load ratings specified in the specifications.
• Aquest dispositiu només és per a ús interior.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• Smart Light Switch (1/2/3 gang) x 1
• Placa de fixació x 1
• Capacitor x 1/2/3 (depending on gang count)
• Cargol x 2
• Guia d'usuari x 2

4. Especificacions

5. Configuració

5.1 Requisits previs

• BroadLink S3 Hub (sold separately)
• BroadLink App installed on your smartphone (iOS 9.0+ or Android 4.1+)
• Stable 2.4GHz Wi-Fi network

5.2 Instal·lació elèctrica

The BroadLink LC1 Smart Light Switch is designed for easy installation without requiring a neutral wire, making it compatible with most UK homes. Its modular design simplifies the process.

1. Apagueu l'alimentació: IMPORTANT! Before starting any electrical work, turn off the power to the light switch at your main circuit breaker.
2. Treure l'interruptor antic: Carefully remove your existing light switch from the wall box.
3. Wire the LC1 Switch: Connect the Live (L-in) and Load (L-out) wires to the corresponding terminals on the BroadLink switch. Refer to the wiring diagram below.
4. Install Capacitor: Connect the provided capacitor across the light fitting (between Live and Neutral) as per the instructions in the Quick Setup Guide. This is crucial for stable operation in no-neutral setups.
5. Muntar l'interruptor: Secure the switch module into the wall box, then attach the fixing plate and the switch panel.
6. Restaura l'alimentació: Torneu a encendre l'alimentació al disjuntor.

5.3 Vinculació d'aplicacions

1. Descarregar l'aplicació: Download the BroadLink App from the App Store or Google Play.
2. Registra't/Inici de sessió: Create a new account or log in to your existing BroadLink account.
3. Add S3 Hub: If you haven't already, add your BroadLink S3 Hub to the app by following the in-app instructions.
4. Add Light Switch: In the BroadLink App, tap '+' to add a new device. Select 'Light Switch' and follow the on-screen prompts to connect your LC1 switch to the S3 Hub.

6. Instruccions de funcionament

6.1 Control manual

The LC1 Smart Light Switch features a touch-sensitive panel. Simply tap the corresponding button on the switch to turn the connected light(s) ON or OFF.

6.2 BroadLink App Control

Use the BroadLink App to control your lights remotely from anywhere with an internet connection.

• Comandament ON/OFF: Tap the ON/OFF icons next to each switch in the app to control your lights.
• Programació: Set up timers to automatically turn lights ON or OFF at specific times (e.g., turn on bedroom light at 7:00 AM).
• Grups: Group multiple switches together to control them simultaneously.
• Escenes: Create custom scenes (e.g., 'Movie Night' scene to dim lights, 'Good Morning' scene to turn on lights gradually).
• Configurable Smart Button: Buttons can be configured in Routines to trigger other smart home devices or scenes, making your light switch a universal smart home controller.

6.3 Control de veu

Integrate your LC1 Smart Light Switch with Amazon Alexa or Google Assistant for hands-free control.

1. Comptes d'enllaç: In the Alexa or Google Home app, enable the BroadLink skill/service and link your BroadLink account.
2. Descobriu els dispositius: Ask Alexa or Google Assistant to discover new devices.
3. Comandaments de veu: Utilitzeu ordres com ara:
   • "Alexa, turn on kitchen light."
   • "Hey Google, turn off living room lights."

6.4 Integració d'IFTTT

Expand the functionality of your smart switch using IFTTT (If This Then That).

1. Connect BroadLink: In the IFTTT app or website, connect your BroadLink account.
2. Create Applets: Create custom applets to automate actions. For exampLI:
   • "If my phone leaves home, then turn off all lights."
   • "If motion is detected, then turn on the hallway light."

7. Manteniment

• Neteja: Wipe the switch surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Actualitzacions de firmware: Periodically check the BroadLink App for available firmware updates to ensure optimal performance and access to new features.
• Cicle d'alimentació: Si l'interruptor deixa de respondre, proveu de tallar l'alimentació al disjuntor durant 10 segons i després torneu-lo a engegar.

8. Solució De Problemes

8.1 Switch Not Responding

• Comproveu la potència: Ensure the circuit breaker is ON and the switch is receiving power.
• Check S3 Hub: Verify that your BroadLink S3 Hub is powered on and connected to your Wi-Fi network.
• Connexió a l'aplicació: Ensure your smartphone has an active internet connection and the BroadLink App is up to date.
• Torna a emparellar: If issues persist, try removing the device from the app and re-pairing it.

8.2 Lights Flickering

• Instal·lació de condensadors: Ensure the capacitor is correctly installed across the light fitting. This is essential for no-neutral switches to prevent flickering, especially with low-wattage bombetes LED.
• Compatibilitat amb bombetes: Some older or non-dimmable LED bulbs may not be fully compatible with smart switches. Try a different type of LED bulb if flickering persists.

8.3 El control per veu no funciona

• Enllaç del compte: Confirm that your BroadLink account is correctly linked to Alexa or Google Assistant.
• Descobriment de dispositius: Ask your voice assistant to discover devices again.
• Nom del dispositiu: Ensure the device names in the BroadLink App match the names you are using with your voice assistant.

9. Consells d'usuari

• Optimal Capacitor Placement: For best results and to prevent flickering, ensure the capacitor is installed as close as possible to the light fixture itself, not necessarily at the switch.
• Convencions de nomenclatura: Use simple, distinct names for your switches in the BroadLink app to make voice control easier and more reliable.
• Explore IFTTT: Don't limit yourself to basic ON/OFF. IFTTT offers powerful automation possibilities by connecting your switch with other smart devices and services.

10. Garantia i assistència

For warranty information, technical support, or further assistance, please refer to the official BroadLink weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.

Producte acabatview video demonstrating features, app control, and installation.