1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Hippcron Car Alarm Start Stop Button Engine RFID Keyless Entry System. This system is designed to upgrade your vehicle with a convenient push-button start and remote engine control capabilities, enhancing both security and user experience. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Producte acabatview i Característiques
The Hippcron Car Alarm Start Stop Button System offers a range of features for modern vehicle convenience and security:
- One Button Start/Stop: Simplifies engine ignition and shutdown.
- Remote Engine Start/Stop: Allows starting or stopping the engine using your original car remote keys (kit does not include keys).
- Smart Engine Stop: Automatically shuts down the engine 15 minutes after remote start if no further operation is detected.
- Smart Door Lock: Automatically locks car doors after remote engine start.
- Brake Self-Check: Prevents engine start via the push button without the brake pedal being pressed.
- Handbrake Self-Check: Prevents remote engine start if the handbrake is not engaged.
- Compatibilitat: Designed to integrate with existing anti-theft and keyless entry devices.
- Extreme Cold Weather Engine Start: Features up to three automatic start attempts to ensure ignition in cold conditions.
- Protecció d'alta temperatura: Electronic components are protected to operate normally within a wide temperature range (-20 °C to 80 °C).
- Apagueu la memòria: Retains settings after power loss.
3. Contingut del paquet
Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:
- 1 x Car Engine Push Starter Host (Control Box)
- 1 x Push Start Stop Button (1m Cable Length)
- 2 x Wire Harness (0.6m / 1m lengths)
- 1 x manual d'usuari en anglès
4. Especificacions
| Paràmetre | Valor |
|---|---|
| Voltage | 12 V +/- 2 V |
| Actual | <15A |
| Freqüència | 433.92 MHz |
| Pes del producte | 0.11 kg |
| Pes del paquet | 0.35 kg |
| Dimensions del producte (L x A x A) | 8.70 x 8.50 x 3.00 cm (3.43 x 3.35 x 1.18 polzades) |
| Dimensions del paquet (L x W x H) | 17 x 14 x 5 cm (6.69 x 5.51 x 1.97 polzades) |
| Interval de temperatura de funcionament | -20 °C a 80 °C |
5. Configuració i instal·lació
Important: Installation of this system requires advanced automotive electrical knowledge. It is highly recommended that installation be performed by a qualified professional to avoid damage to your vehicle or the product.
5.1 General Wiring Principles
The system connects to various points in your vehicle's electrical system. Refer to the detailed wiring diagram below for specific connections. Key connections include:
- Oil Pump Motor: The 1st pin port connects to the oil pump motor.
- Fre de mà: The 2nd pin port connects to the handbrake signal. This is crucial for safety features like remote start.
- Central Locking Line: The 6th pin port connects to the central locking line for smart door lock functionality.
- Anti-theft Device: The 3rd pin port needs to be connected to an existing anti-theft device for enhanced security features. Your car must have an original or aftermarket anti-theft system for this feature to function.
5.2 Wiring Diagram (Model XY-Q638)
5.3 Push Button Installation
The push start/stop button is designed for easy integration into your dashboard. Ensure a secure and accessible location is chosen. The button itself is chrome-plated, polished, and rust-resistant, with a silicone button for durability, rated for over 300,000 activations.
6. Instruccions de funcionament
6.1 Engine Start/Stop via Push Button
- Ensure the vehicle's handbrake is engaged.
- Premeu el pedal de fre.
- Press the "ENGINE START STOP" button once to start the engine.
- To stop the engine, press the "ENGINE START STOP" button once while the vehicle is stationary and the brake pedal is pressed.
6.2 Arrencada/aturada remota del motor
This feature utilizes your car's original remote keys.
- Ensure the handbrake is engaged.
- Press the "Lock" button on your original car remote key three (3) times within five (5) seconds.
- The car engine will start remotely.
- To stop the engine remotely, repeat the same sequence.
6.3 Smart Engine Stop Function
If the engine is started remotely and no further operation (e.g., opening a door, pressing the brake) occurs within 15 minutes, the engine will automatically shut down for safety and fuel efficiency.
6.4 Smart Door Lock Function
After a remote engine start, the car doors will automatically lock. To enter the car, you will need to unlock the doors using your remote key, ensuring your car remains secure.
6.5 Extreme Cold Weather Start
In extremely cold conditions, if the engine does not start on the first attempt, the system will automatically make up to three (3) attempts. This process involves holding the start button for 3 seconds to initiate the fuel pump check and multiple start attempts.
7. Manteniment
The Hippcron Car Alarm Start Stop Button System is designed for durability and requires minimal maintenance. The high-quality circuit board features silver contacts for better conductivity and long life, and the system includes high-temperature protection to ensure components operate reliably between -20 °C and 80 °C.
- Atenció general: Keep the control unit and push button free from excessive dust and moisture.
- Neteja: Use a soft, dry cloth to clean the push button and visible components. Avoid harsh chemicals.
- Component Lifespan: The push button is rated for over 300,000 activations, indicating a long operational life under normal use.
8. Solució De Problemes
Si teniu problemes amb el sistema, consulteu els problemes i solucions més comuns següents:
| Problema | Possible causa/solució |
|---|---|
| Engine does not start via push button. | Ensure the brake pedal is pressed. The system includes a "Brake Self-Check" feature that prevents starting without the brake engaged. |
| Remote engine start fails. |
|
| Engine stops automatically after remote start. | This is a normal safety feature ("Smart Engine Stop"). If no operation occurs within 15 minutes after remote start, the engine will shut down. |
| Engine does not start in cold weather. | The system is designed for cold weather and will attempt to start up to three times. Hold the start button for 3 seconds to initiate the fuel pump check and multiple start attempts. |
| Anti-theft features not working. | Ensure your vehicle has an original or aftermarket anti-theft device and that the 3rd pin port of the system is correctly connected to it. |
9. Consells d'usuari
- Handbrake Engagement: Always ensure your handbrake is engaged before attempting remote start or using the push button start for safety.
- Anti-theft Compatibility: For the anti-theft features to work, your vehicle must already have an original or aftermarket anti-theft device. The system integrates with these existing devices.
- Engine Blocking Time: The system may have a brief blocking time after engine shutdown as a safety measure, especially if integrated with existing vehicle security systems. This is normal behavior to prevent accidental restarts or unauthorized access.
10. Garantia i Suport
This Hippcron Car Alarm Start Stop Button Engine RFID Keyless Entry System comes with a 1 any de garantia des de la data de compra, que cobreix els defectes de fabricació. Conserveu el comprovant de compra per a reclamacions de garantia.
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly through the platform where the product was purchased.
