Introducció
The DETONGER P2 Mini Thermal Label Printer is a portable, inkless label maker designed for various home and office applications. This manual provides instructions on how to set up, operate, maintain, and troubleshoot your device to ensure optimal performance.
Característiques del producte
- Fàcil d'utilitzar: Mini Bluetooth wireless portable thermal label printer for easy mobile phone connection.
- Ink-less Printing: Utilizes thermal printing technology, eliminating the need for ink, toner, or ribbons. Prints in black and white.
- Powerful Free App: Features a dedicated app with numerous templates for various label types, including clothing, price, cable, jewelry, address, folder, food, and name labels.
- Editable Content: Supports editing text, barcodes, logos, images, tables, time, and lines.
- Compacte i portàtil: Palm-sized design (128x86x62mm, 249g) for easy carrying and printing anywhere.
- Bateria recarregable: Built-in 1500mAh Li-ion battery provides up to 2 hours of continuous printing.
- USB tipus C: Modern Type-C charging port for convenience.
- Compatibilitat àmplia d'etiquetes: Supports label widths ranging from 15mm to 55mm.
Contingut del paquet
Si us plau, comproveu el paquet per veure si hi ha els elements següents:
- DETONGER P2 Mini Thermal Label Printer
- Cable de càrrega USB
- Manual d'usuari (aquest document)
- 3 rolls of thermal self-adhesive white label paper (specific sizes may vary based on purchase)
Guia de configuració
1. Encès
- Press and hold the power button on the front of the printer until you hear a beep, indicating the printer is on. The indicator light will illuminate.
2. Càrrega de la cinta d'etiquetes
- Press the "OPEN" button located on the side of the printer to open the paper compartment.
- Insert the label tape roll into the compartment with its printable surface facing downward.
- Slide the orange baffles inward to secure the label tape roll in place.
- Close the paper compartment cover. Ensure approximately 0.1-0.2 inches of label paper is left outside the printer.
- Press the power button once to feed a blank label and align it for printing.
3. Instal·lació de l'aplicació i connexió Bluetooth
- Download and install the "WePrint" app from your device's app store (available for iOS, Android, HarmonyOS, and PC).
- Open the "WePrint" app.
- In the app, search for and connect to the printer via Bluetooth. The printer's indicator light will turn solid blue when successfully connected.
Instruccions de funcionament
1. Editing Content in the App
- Once connected, select a template or create a new label within the "WePrint" app.
- Utilize the app's editing tools to customize text, add barcodes, logos, images, tables, and other elements. The app supports multiple languages and fonts.
- Adjust print settings such as print darkness, print speed, and orientation as needed.
2. Impressió d'etiquetes
- After editing your label, tap the "Print" button in the app.
- The printer will feed and print the label.
- Carefully tear off the printed label.
3. Aplicacions
The DETONGER P2 is versatile for various labeling needs:
- Llar i oficina: Organize storage, label files, mark pens, books, and customer files.
- Venda al detall: Crear preu tags for clothing, jewelry, and other products.
- Food Industry: Label food containers with dates, ingredients, and prices.
Manteniment
1. Neteja del capçal d'impressió
Per mantenir la qualitat d'impressió, netegeu regularment el capçal d'impressió:
- Ensure the printer is turned off and disconnected from power.
- Obriu el compartiment de paper.
- Netegeu suaument el capçal d'impressió amb un bastonet de cotóampamb alcohol isopropílic.
- Allow the print head to dry completely before closing the compartment and using the printer.
2. Cura de la bateria
Per allargar la durada de la bateria:
- Carregueu la impressora completament abans del primer ús.
- Eviteu esgotar completament la bateria amb freqüència.
- If storing the printer for an extended period, charge it to about 50% and recharge every few months.
- Utilitzeu només el cable de càrrega USB proporcionat.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La impressora no s'encén | Low battery or power button not pressed long enough. | Charge the printer. Press and hold the power button for 3-5 seconds. |
| No es pot connectar mitjançant Bluetooth | Bluetooth is off on your device, printer is out of range, or app connection issue. | Ensure Bluetooth is enabled. Move closer to the printer. Restart the app and printer, then try connecting again. |
| Poor print quality (faint, blurry) | Print head is dirty, label paper is old/damaged, or print darkness setting is too low. | Clean the print head. Replace label paper. Increase print darkness in the app settings. |
| Paper jam or misfeed | Label roll not inserted correctly, or foreign object in paper path. | Open the compartment, remove the label roll, clear any obstructions, and re-insert the roll correctly. Ensure baffles are adjusted. |
| Printer stops responding | Error temporal de programari. | Turn off the printer, wait a few seconds, then turn it back on. |
Especificacions
| Característica | Especificació |
|---|---|
| Nom de marca | DETONADOR |
| Model | P2 |
| Tipus | Thermal Printer, Label Maker |
| Mètode d'impressió | Inkless thermal |
| Màx. Resolució | 203 ppp |
| Velocitat d'impressió | 20 ppm |
| Amplada de l'etiqueta | 15-55 mm |
| Connectivitat | Bluetooth, USB (Tipus C) |
| Bateria | 1500mAh x 3.7V Built-in Li-ion |
| Temps de càrrega | 4-5 hores |
| Temps d'execució | Approx. 2 hours continuous printing |
| Dimensions (LxWxH) | 128x86x62 mm |
| Pes | 249 g |
| Voltage | 220-240V(±10%) |
| Certificació | CE, FCC, RoHS |
Consells per a l'usuari
- Pre-cut Labels: For best results and to avoid waste, ensure your label design fits within the label size you are using.
- Actualitzacions de l'aplicació: Regularly check for updates to the "WePrint" app to access new features, templates, and performance improvements.
- Emmagatzematge d'etiquetes: Store thermal labels in a cool, dry place away from direct sunlight and heat to prevent premature fading.
- Impressions de prova: Before printing a large batch, perform a test print to verify settings and content accuracy.
- Optimització de la bateria: To maximize printing time, ensure the printer is fully charged before extended use.
Garantia i Suport
The DETONGER P2 Mini Thermal Label Printer comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, troubleshooting assistance, or warranty claims, please contact the DETONGER Official Store customer service through the platform where you purchased the product. Please provide your order number and a detailed description of the issue.
