1. Informació important de seguretat
Read all instructions carefully before using the Awgem MF2 Spot Welding Machine. Failure to follow these instructions may result in damage to the product or personal injury. Keep this manual for future reference.
- Temperatura i humitat: Avoid exposing the device to extreme temperatures or moisture. This can damage the device and void the warranty. The device contains a battery, plastic, and sensitive electronic components.
- Temperatures altes: Do not leave the device in an outdoor car for extended periods, as high temperatures may cause the internal battery to expand or explode.
- Eliminació de la bateria: Batteries should be recycled or disposed of separately from household waste, in accordance with local environmental laws and guidelines.
- Seguretat dels nens: Keep away from children unless supervised by an adult.
- Ús previst: No utilitzeu aquest producte per a finalitats diferents a les previstes.
- Pre-use Inspection: Inspect the product before each use; do not use if damaged.
- Instal·lació i funcionament: Follow installation and operation guidelines to avoid injury.
- Exposició a l'aigua: No exposeu el dispositiu a l'aigua ni a la humitat.
2. Producte acabatview
The Awgem MF2 is a portable Farad capacitor spot welding machine designed for precision welding tasks. It is suitable for mobile phone repair, battery assembly, metal welding, and features a burner function. The device utilizes new Farad capacitors for increased lifespan and strong output current.
3. Configuració i components
3.1 Desembalatge i preparació inicial
- Inspect Package Contents: Verify all items are present and undamaged.
- Treure les pel·lícules protectores: Before first use, remove all protective films from the device and its components.
3.2 Càrrega
Connect the provided USB cable to a certified 5V power adapter to charge the device. The charging interface is Type-C/DC, with an input parameter of 5~20V/2A (MAX).
3.3 Welding Pen Assembly
The intelligent manual welding pen features a detachable design for easy maintenance and replacement of welding needles.
4. Instruccions de funcionament
4.1 Engegada/Apagada i Selecció de Mode
- Encès: Mantén premut el botó d’engegada durant 3 segons per engegar el dispositiu.
- Canvi de modes: Short press the power button to cycle through different operating modes. The device features a high-quality 320*170 high-definition color screen for clear display.
4.2 Welding Operations
The Awgem MF2 offers 99 gear adjustments and 10,000 types of fine-tuned outputs to suit various welding materials and thicknesses. It supports welding up to 0.4mm thickness.
- Integrated Diversion + Dual Pulse Welding: The device uses an integrated flow guiding and rapid cooling technology for firmer and more secure welds.
- Precision Spot Welding: The intelligent manual welding pen allows for precise triggering and spot welding.
- Visual Welding Area: The device incorporates ultra-thin insulation technology, increasing the weldable area and making maintenance more convenient.
4.3 Fine-Tuned Output Settings
The device offers extensive customization for welding parameters:
4.4 Aplicacions
The Awgem MF2 is versatile and can be used for:
- Transplanting battery cells
- Muntatge de la bateria
- Metal welding
- Repairing phone frames
- Welding lens frames
- Funció de cremador
5. Manteniment i cura
- Emmagatzematge: After use, turn off the device and store it in a dry place, away from children.
- Neteja: Ensure the welding pens and contact points are clean for optimal performance. Use sandpaper (included in package) if necessary.
- Durabilitat: The device features a metal suspension guide rail, abandoning plastic sliding structures, to increase service life by 10 times.
6. Solució De Problemes
If you encounter any issues with your Awgem MF2 Spot Welding Machine, please refer to the following general troubleshooting steps:
- El dispositiu no s'encén: Assegureu-vos que el dispositiu estigui completament carregat. Premeu i manteniu premut el botó d'engegada durant 3 segons.
- Poor Welding Effect: Check the welding parameters (Gear, Preheat, Trigger Time, Pause, Stitch Welding) and adjust them according to the material and thickness. Ensure the welding pens are clean and properly seated. Verify the material is within the weldable thickness range (up to 0.4mm for most materials, 0.25mm for pure nickel sheet).
- Sobreescalfament: Allow the device to cool down if it becomes excessively hot during prolonged use. Ensure proper ventilation.
- Problemes de visualització: If the screen is unresponsive or shows abnormalities, try restarting the device.
For persistent issues, please contact customer support using the information provided in the Warranty & Support section.
7. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Awgem |
| Model | MF2 Spot Welder (also H1/H2) |
| Ajust d'engranatges | 99 Engranatges |
| Interfície de càrrega | Type-C/DC |
| Paràmetre d'entrada | 5~20V/2A (MAX) |
| Interfície de sortida | EC8 |
| Vol. De sortidatage | 6 V (màx.) |
| Corrent de sortida | 1280A (MÀX.) |
| Resolució de pantalla | 320*170 |
| Mida del producte | 9.4 x 16.9 x 4.5 cm (3.7 x 6.65 x 1.77 polzades) |
| Pes net | Aprox. 500 g |
| Max Welding Thickness | 0.4mm (0.25mm for pure nickel sheet) |
| Lifespan Improvement | 10x (due to new Farad capacitors) |
| Dimensions del paquet | 21 cm (L) x 15 cm (A) x 11 cm (Al) |
| Pes del paquet | 1.008 kg |
7.1 Security Protections
The Awgem MF2 is equipped with 9 levels of security protection:
8. Garantia i Suport
8.1 Informació del fabricant
- Nom de l'empresa: Shenzhen JueQi Technology Co., LTD
- Adreça: CN-Building A 907, Zhiyun Industrial Park, No.13, Huaxing Road, Henglang Community, Dalang Street, Long hua District, Shenzhen City
- Correu electrònic: xiaomin.huang@jueqikj.com
- Telèfon: 86-18818780728
8.2 EU Authorized Representative
- Nom de l'empresa: MAGHREB TEX
- Adreça: FR-8 Rue Antonin Georges Belin, ARGENTEUIL, VAL D OISE
- Correu electrònic: yuanfen429631@gmail.com
- Telèfon: 33-615875362
8.3 Informació de compliment
The Awgem MF2 Spot Welding Machine complies with the following standards:
- EN 55032:2015+A11:2020, EN 55035:2017+A11:2020
- EN IEC 61000-3-2:2019/A1:2021, EN IEC 61000-3-3:2013+A1:2019
- EN 61000-4-2:2019, ENC IEC 61000-4-3:2020
- EN 61000-4-2:2012, ENC 61000-4-5:2014+A1:2017
- EN 61000-4-2:2014, ENC 61000-4-8:2010
- ENC IEC 61000-4-11:2020
Podeu descarregar un manual d'usuari detallat en format PDF: Manual d'usuari (PDF)
