1. Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your Scimagic-RC SMG-240 Teleco remote control. This device is designed for controlling garage doors and gates, compatible with Teleco TXP-433-A01, TXP-433-A02, and TXP-433-A04 systems. Please read this manual thoroughly before use to ensure proper functionality and safety.
Disclaimer: Your existing remote must be identical to the one advertised for compatibility. This new remote is not compatible with other remote types.
2. Especificacions
| Característica | Detall |
|---|---|
| Nom de marca | Scimagic-RC |
| Número de model | SMG-240 Teleco |
| Mètode de codificació | Codi d'aprenentatge |
| Tipus de codi | Codi mòbil |
| Freqüència | 433.92 MHz (433mhz) |
| Marca compatible | Telecomunicacions |
| Botons | 1, 2, or 4 (depending on model) |
| Ús | Program on receiver |
| Material | ABS |
| Bateria | CR2032 (inclòs) |
| Dimensions | 55mm * 45mm * 8mm (Lightweight Design) |
| Origen | Xina continental |
| Certificació | CE |
3. Contingut del paquet
El paquet del producte inclou els articles següents:
- 1 x Remote control (1, 2, or 4 button variant)
- 1 pila CR2032 (preinstal·lada o separada)
- 1 x English instruction manual (this document)
- 1 x Base/Clip for wall mounting or attachment
4. Configuració i programació
The remote control must be programmed to your receiver. This process involves pairing the new remote with your existing garage door or gate opener system.
4.1. Programming with the Receiver (Recommended Method)
This method is generally used when you are adding a new remote to your system or if you have lost your original remote.
- Locate the Learn / Code Set button on the motor. This button is typically found under the lamp cover or on the back of the motor unit of your garage door or gate opener.
- Press the Learn / Code Set button once, then release it. A light on the receiver should illuminate, indicating it is in programming mode.
- Press the desired transmitter button on your new remote control once. The light on the receiver should go out.
- Press the same button on the new remote control again. The light on the motor will flash and then go out, signifying that the remote has been successfully coded.
- Test the operation of the remote. Ensure it activates your garage door or gate.
4.2. Programming with a Working Remote (Alternative Method)
This method can be used if you have an existing, working remote control and your receiver supports this type of programming. Refer to your receiver's manual for specific instructions if this method does not work.
- Press and hold the hidden button on your original remote. (You may need to remove the battery clip to access it). You should hear a long beep.
- Press the button on the original remote once. You will hear another long beep.
- Press button 1 on your new remote control. You will hear two short beeps.
- Press button 2 on your new remote control once. You will hear two more short beeps.
- Press and hold button 1 on the new remote control fins que sentiu un bip llarg.
- Repeat step 5 for button 2 on the new remote control.
- Espereu uns 5 segons. Your new remote control should now be ready to operate.
5. Funcionament
Once programmed, your remote control is ready for use.
- Press the programmed button: Press the button on the remote control that you programmed to your garage door or gate opener.
- Observe the action: The garage door or gate should open or close.
- Interval: The effective operating range is typically 10-30 meters in open space. Environmental factors may affect this range.
6. Manteniment
6.1. Substitució de la bateria
The remote control uses a CR2032 battery. The battery typically lasts 1-2 years, depending on usage frequency. Replace the battery when the remote's range decreases or it stops responding.
- Obriu el comandament a distància casing: Gently pry open the remote control casing. Some models may have a small notch for this purpose.
- Traieu la bateria antiga: Traieu amb cura la pila CR2032 antiga del seu compartiment.
- Inseriu la bateria nova: Place a new CR2032 battery into the compartment, ensuring the correct polarity (+ side up).
- Tanca el casing: Enganxa el comandament a distància casintorneu a unir-se de manera segura.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Remote not working after programming. | Incorrect programming steps, incompatible receiver, or dead battery. |
|
| Curt abast operatiu. | Low battery, environmental interference, or obstruction. |
|
| Lost original remote, cannot program. | Reliance on "programming with working remote" method. |
|
| Remote is not compatible with my Teleco system. | Incorrect model or frequency. |
|
8. Consells d'usuari
- Keep a spare: Considera la compraasing an extra remote as a backup, especially if you frequently misplace items.
- Muntatge en paret: Utilize the included base to fix the remote to a wall near your garage or gate for easy access and to prevent misplacement.
- Check compatibility carefully: Always double-check your existing remote's model and frequency (433.92MHz) before purchasing a replacement to ensure it matches the advertised compatible models (Teleco TXP-433-A01, A02, A04).
- Direct programming: If you've lost your original remote, remember that this remote can be programmed directly to the receiver/motor, which is a significant advantage.
9. Garantia i Suport
This product is manufactured by Shenzhen Scimagic Development Technology Co. Ltd.
Adreça del fabricant: Honghai Gebu Building 2301, Baoan Road, Songgang Baoan District Shenzhen, Guangdong, China.
For any issues or support, please contact the seller or manufacturer directly.
Garantia: All products from this store typically come with a 1-year warranty.
