NaviFly F83 6.25-inch Motorcycle Carplay GPS Navigation Android Auto Dual Camera User Manual

1. Producte acabatview

The NaviFly F83 is a 6.25-inch motorcycle Carplay dash cam featuring two waterproof cameras for front and rear video recording. It supports wireless Carplay and Android Auto connections, allowing riders to connect their phones for GPS navigation, music playback, Bluetooth calls, and voice assistance. The device boasts an IP67 waterproof rating, ensuring durability and normal operation even in rainy conditions.

2. Product Component List

El paquet inclou els components següents:

3. Especificacions del producte

4. Memory Card Specifications Requirement

The quality of the memory card significantly impacts the stability of video recording. For optimal performance and safe video recording, please use memory cards from reputable brands such as SanDisk, Kingston, Toshiba, and Samsung. The speed certification should be at least Class 10, and the card must support up to 256GB capacity.

5. Memory Card Installation Instructions

Per instal·lar la targeta de memòria:

1. First, remove the TF card cover.
2. Insert the memory card into the device, ensuring the correct orientation.
3. Reinstall the TF card cover.
4. Finally, secure the cover by tightening the two screws.

Note: Pay attention to the direction of the card cover during reinstallation.

6. Mounting Bracket Installation Instructions

6.1. Details of Bracket Accessories

6.2. Bracket Installation Steps

1. Install the TPU pads in size order on the corresponding slots of the bracket bottom cover and bracket connecting rod.
2. Install the bracket bottom cover on the handlebar.
3. Install the bracket connecting rod and bracket bottom cover together.
4. Use screw 2 to secure them.
5. Secure the bracket assembly and the main unit with screw 2.

7. Cable Clicker Installation Instructions

To install the cable clicker control:

1. Install the cable clicker control on the left handlebar of the motorcycle.
2. Fixeu-lo amb cargols.

8. Instruccions de connexió

8.1. Power Cable Connection Instructions

Connect the power cable to the motorcycle battery as follows:

• Red wire: Connect to ACC (Accessory power).
• Yellow wire: Connect to B+ (Battery positive).
• Black wire: Connect to ground.

Nota: Make sure to confirm the corresponding ACC/B+/ground interfaces on the motorcycle, connect them one-to-one, and tighten. Please use the original power cable.

8.2. BM Connector Wiring Instructions

Connect the components using the BM connectors:

1. Connect the front and rear cameras to the corresponding BM connector on the main unit and tighten them. (Wires are marked with Front/Rear CH1/2).
2. Connect the cable clicker control to the corresponding BM connector on the main unit and tighten it. (Wire is marked with Controller).
3. Connect the power cable to the corresponding BM connector on the main unit and tighten it. (Wire is marked with Power).

9. Front and Rear Camera Installation Instructions

Install the front and rear cameras separately at the front and rear of the motorcycle, and secure them in place.

10. Overall Installation Schematic

This diagram illustrates the complete installation of the NaviFly F83 system on a motorcycle.

11. Explicació de la interfície

The main interface of the device features several buttons and indicators:

1. Botó d'inici: Feu clic per tornar a la pàgina d'inici.
2. Tecla de brillantor: Feu clic per ajustar la brillantor de la pantalla.
3. Audio Output Shortcut Key: One-click to enter the demonstration screen for connecting Bluetooth headphones to the phone.
4. Camera Shortcut Button: Feu clic a view la interfície de gravació.
5. Botó de canvi: Click to switch between the front camera screen, rear camera screen, and motorcycle preview.
6. Botó de gravació: Click to start recording video, click again to stop recording.
7. Botó de foto: Feu clic per fer una foto amb un sol clic.
8. Botó de bloqueig: Locks the currently recording video to prevent loss.
9. Apple Carplay: Connects to Apple devices.
10. Android Auto: Connects to Android devices.
11. Vídeo WiFi: Click to enter connection mode, watch and record videos on your phone.
12. Sortida d'àudio: After Carplay/Auto phone projection, the phone's Bluetooth can connect to Bluetooth headphones for music playback or answering calls.
13. Reproducció de vídeo: Feu clic a view vídeos a la pantalla de vídeo.
14. Configuració: Click to access the settings menu.

12. Ajust automàtic de la brillantor

The built-in light sensor automatically detects ambient light and adjusts screen brightness for comfort. In automatic brightness mode, manual adjustment is disabled.

• Click the "AUTO" button on the sidebar to enable/disable automatic brightness.
• Lightly press the "AUTO" button to switch to automatic brightness mode.
• You can set minimum and maximum brightness values. Drag the white dot button on the left to set the minimum, and the right button for the maximum. Settings are saved automatically.

13. Rain Mode (Screen Lock)

To prevent accidental touches from raindrops on rainy days, you can activate Rain Mode:

• Activar: Long-press the third button on the cable clicker control for 5 seconds. Once activated, touchscreen functionality will be disabled.
• Desbloquejar: Long-press the third button on the cable clicker control for 5 seconds again.

14. Característiques de connectivitat

14.1. Apple CarPlay

To connect your iPhone via Apple CarPlay:

1. Click the [Apple CarPlay] button on the device interface.
2. On your iPhone, turn on Wi-Fi and Bluetooth.
3. Select the device's Bluetooth (named MT02-XXX) from your phone's Bluetooth settings and pair.
4. Confirm the CarPlay connection prompt on your iPhone.

Note: The Apple CarPlay option only supports Apple phones. When the machine is powered on, it will attempt to automatically connect to the last connected phone.

14.2. Android Auto

To connect your Android phone via Android Auto:

1. Click the [Android Auto] button on the device interface.
2. On your Android phone, turn on Wi-Fi and Bluetooth.
3. Select the device's Bluetooth (named MT02-XXX) from your phone's Bluetooth settings and pair.
4. Confirm the Android Auto connection prompt on your Android phone.

Note: The wireless Android Auto option only supports Android phones. When the machine is powered on, it will attempt to automatically connect to the last connected phone.

14.3. WiFi Video

To connect for WiFi Video functionality:

1. Scan the QR code on the device screen to download the corresponding application (Viidure).
2. Open the application and follow the prompts to connect to the device's WiFi. (WiFi Name: RTSP-XXXXX, Password: 12345678).
3. Once connected, the device will enter the recording screen, and you can view or download recorded videos, and adjust machine parameters via your phone.

Note: Closing the WiFi on your phone will disconnect the connection. It takes approximately one minute after disconnecting to operate on the machine.

15. Dash Cam Operation

When the device is in recording mode, camera images will not be displayed on the main page. To view the camera images, click the camera icon. When a card is inserted, the system automatically enters recording mode. During recording, the red dot in the recording icon will blink.

16. Sortida d'àudio

After connecting to Apple CarPlay or Android Auto for screen mirroring, you can use your phone's Bluetooth to connect to the motorcycle's Bluetooth headphones. Once connected successfully, all sounds produced by the device will be transmitted to the motorcycle's Bluetooth headphones for playback.

Important: If there are any sound abnormalities, please disconnect the phone from the headphones and reconnect.

17. Reproducció de vídeo

To enter the video playback interface, click the [Video Playback] button on the main screen.

In the playback interface:

• You can select [Video], [Photo], or [Locked Video] folders.
• Click the select button next to a file to delete, lock, or unlock it.
• Click the play/pause button to play or pause the video.
• Click the next/previous buttons to switch to the next video or photo.
• Click the fullscreen button to play the video in fullscreen.
• Click the back button to return to the previous screen.

18. Configuració

The settings options are divided into three main parts: General, Camera, and System.

18.1. Configuració general

• Brillantor: Adjust screen brightness (see section 12).
• Assistive Touch: This is a floating window button in screen projection mode on your phone.
• Clear Connections: Clear the connection history with your phone (Bluetooth, WiFi, screen playback).
• Mode tàctil: Choose between normal mode or rain mode. In rain mode, touch disable function can be enabled by long pressing the square control button.

18.2. Configuració de la càmera

• Resolució de registre: Set video resolution to 1080P or 720P (default is 1080P).
• Split Time (Segmented Time): Set video segmentation time to 1, 3, or 5 minutes (system default is 1 minute).
• Microphone (Recording Sound): Turn microphone recording on or off.
• Rear Mirror Image: Turn rear camera mirror image on or off for flexible camera installation.

18.3. Configuració del sistema

• Idioma: Select operating language (Simplified Chinese, Traditional Chinese, English, Russian, Spanish, French, German, Japanese, Korean, Italian, Portuguese).
• Data i hora: Set year, month, day, hour, minute, second, and time format.
• Informació d'emmagatzematge: View memory card information, including remaining available capacity.
• Format: Format all data on the inserted memory card. It is recommended to manually format the card upon first insertion and regularly thereafter.
• Restabliment de fàbrica: Restore all settings to their initial state.
• Versió del firmware: View la versió actual del firmware.

19. Troubleshooting (Common Issues)

20. Consells d'usuari

• For optimal performance, ensure your phone's operating system and the device's firmware are up to date.
• Regularly check and clean camera lenses for clear recordings.
• Periodically format your memory card to maintain recording stability and free up space.
• When connecting to Carplay/Android Auto, ensure your phone's Bluetooth and Wi-Fi are enabled and correctly paired.

21. Garantia i assistència

The NaviFly F83 comes with a 365-day free replacement warranty. For any quality problems, please contact the seller to confirm the issue. After confirming, return the item to the seller, and upon receipt, a new item will be sent to you.

Per a més ajuda o per a view the official user manual in PDF format, please refer to the following document: NaviFly F83 User Manual (PDF).