Aideepen Schumann Resonance Signal Generator User Manual

1. Introducció

The Aideepen Schumann Resonance Signal Generator is a versatile device designed to produce precise ultra-low frequency pulse waves. It can generate the natural 7.83Hz Schumann resonance frequency, as well as adjustable frequencies ranging from 0.01Hz to 100KHz. Built with high-quality, low-temperature drift crystal oscillators and high-precision DAC dedicated chips, this generator ensures excellent frequency stability and pure sine wave output. It is available in two versions: with or without an acrylic protective shell, both powered via a convenient Type-C 5V interface.

This device is intended to influence the spatial environment, promoting relaxation, improving perception, enhancing efficiency, and relieving psychological stress.

2. Producte acabatview i Configuració

2.1 Contingut del paquet

• Set 1 (Shell-free version): 1X Signal Generator
• Set 2 (With acrylic shell): 1X Signal Generator, 1X Acrylic Shell (assembled and shipped)

2.2 Components i interfícies

Familiarize yourself with the main components and interfaces of your signal generator:

Components clau:

• Ultra-long Schumann wave signal transmitting antenna (double sided): Main output for Schumann waves.
• LCD1602 display screen: Shows current frequency and status.
• Output signal indicator light (PWR LED): Indicates signal output status (can be turned off).
• Type-C 5V Power Interface: For power supply (supports Type-C to Type-C power supply).
• Signal test interface (GND/SIN): For connecting an oscilloscope probe to measure the signal.
• 3.5MM audio output port: Can be connected to an external signal amplifier (available on versions with acrylic shell).
• Frequency Adjustment Keyboard: Buttons (0-9, ., OK) for setting frequency.
• Botó de retroil·luminació: Controls LCD backlight and output signal indicator.
• Botó SET: Used for re-entering values and saving parameters.
• Reset button (RES): Per reiniciar el dispositiu.

2.3 Connexió d'alimentació

Connect the device to a 5V DC power source using a Type-C cable. The power interface supports Type-C to Type-C power supply.

3. Instruccions de funcionament

3.1 Engegada/apagada

The device powers on automatically when connected to a 5V Type-C power source. There is no dedicated power on/off switch. To power off, disconnect the Type-C power cable.

3.2 Frequency Adjustment

1. Use the '0-9' and '.' buttons on the Frequency Adjustment Keyboard to enter the desired frequency value.
2. Press the 'OK' button to confirm the input.
3. If an incorrect value is entered, press the 'SET' button to re-enter the value.

ExampLI: To set the frequency to 7.83Hz, press [7][.][8][3], then press [OK]. The default power-on output is 7.83Hz. The adjustable range is 0.01Hz to 100KHz. Note that not all frequency points within this range can be set.

3.3 Saving Parameters

By default, parameters are not saved when the power is turned off. To save your settings for future use:

• Press and hold the 'SET' button until the LCD displays "Data Save ON".

3.4 LCD Backlight Control

• To turn off the LCD backlight: Short press the 'BACKLIGHT' button.
• To turn on the LCD backlight: Short press the 'BACKLIGHT' button again.

3.5 Output Signal Indicator (PWR LED) Control

• To turn off the output signal indication: Long press the 'BACKLIGHT' button.
• To turn on the output signal indication: Long press the 'BACKLIGHT' button again.

3.6 Audio Output Connection (With Case Version)

The version with the acrylic shell features a 3.5mm audio output port. This port can be connected to an external signal amplifier for further processing or output.

3.7 Signal Testing

To verify the output waveform, use an oscilloscope to measure the 'GND/SIN' port. You should observe a pure sine wave.

4. Manteniment

To ensure the longevity and optimal performance of your Schumann Resonance Signal Generator:

• Mantingueu el dispositiu net i lliure de pols. Feu servir un drap suau i sec per netejar-lo.
• Eviteu exposar el dispositiu a temperatures extremes, humitat o llum solar directa.
• Handle the device with care to prevent physical damage, especially the versions without an acrylic shell.
• No intenteu obrir ni modificar el dispositiu, ja que això anul·larà qualsevol garantia potencial i podria causar danys.

5. Solució De Problemes

5.1 LCD does not display correctly after power on?

Briefly press the 'RES' (Reset) button and then power on the device again.

5.2 No signal output or incorrect waveform?

• Ensure the Type-C power cable is securely connected and providing 5V DC.
• Verify the frequency setting using the keyboard and 'OK' button.
• Use an oscilloscope to measure the 'GND/SIN' port to confirm the waveform (refer to Section 3.7).

5.3 Parameters not saving after power off?

Ensure you press and hold the 'SET' button until "Data Save ON" is displayed on the LCD after making changes you wish to save.

6. Especificacions

7. Consells d'usuari

• Extern Amplification for Audio Output: If you are using the version with the 3.5mm audio output, remember that the device itself does not have volume control. You will need to connect it to an external amplifier or audio system to adjust the volume of the output signal.

8. Garantia i Suport

For detailed warranty information and technical support, please refer to the official product documentation. A comprehensive user manual in PDF format may be available for download from the seller's website or can be accessed via this link: Manual d'usuari (PDF).

For any issues not covered in this manual, please contact the seller or manufacturer's customer service for assistance.