Introducció
Thank you for choosing the Yato YT-82786 Electric Screwdriver and Impact Wrench. This versatile cordless tool is designed for heavy-duty screwing and difficult assembly tasks, offering powerful performance and ergonomic handling. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool.
Informació de seguretat
WARNING: Read all safety warnings and instructions before using this power tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Always wear appropriate personal protective equipment, such as safety glasses, gloves, and hearing protection, when operating the tool.
- Keep the tool away from liquids. The tool has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but offers no protection against water ingress.
- Disconnect the battery pack from the tool before performing any adjustments, changing accessories, or storing the tool.
- Use the tool only on stable surfaces and in accordance with the manufacturer's instructions. Ensure your work area is well-lit and free of clutter.
- No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
Components del producte
Your Yato YT-82786 tool typically includes the following components:
- Yato YT-82786 Electric Screwdriver/Impact Wrench body
- Lithium-ion Battery Pack (18V)
- Carregador de bateria
- Belt Clip (often pre-attached or included for user installation)
Configuració
1. Carregant la bateria
- Connecteu el carregador de bateries a una presa de corrent estàndard.
- Slide the Lithium-ion battery pack into the charger. Ensure it clicks securely into place.
- Observe the indicator lights on the charger (refer to Figure 3). A red light typically indicates charging, and a green light indicates a full charge.
- Un cop estigui completament carregat, traieu la bateria del carregador.
2. Attaching/Detaching the Battery
- Adjuntar: Align the battery pack with the base of the tool handle and slide it in until it locks securely.
- Per separar: Press the battery release buttons (usually on the sides of the battery pack) and slide the battery out.
3. Installing/Removing Drill Bits or Driver Bits
- Per seguretat, assegureu-vos que l'eina estigui apagada i que la bateria estigui treta.
- Grip the rear collar of the chuck with one hand and rotate the front collar counter-clockwise to open the chuck jaws (refer to Figure 4).
- Introduïu la broca o la broca de cargol desitjada al mandril, assegurant-vos que estigui centrada.
- Rotate the front collar clockwise to tighten the chuck jaws firmly around the bit. Ensure the bit is securely held and cannot be pulled out easily.
- To remove, reverse the process: rotate the front collar counter-clockwise to loosen and pull the bit out.
Instruccions de funcionament
1. Encès / apagat
- To turn on the tool, press the trigger switch. The speed is variable depending on how far the trigger is pressed.
- Per apagar, deixeu anar el disparador.
2. Adjusting Torque and Speed
- Paràmetres de parell: The adjustable collar near the chuck (see Figure 4) allows you to select different torque settings for screwdriving. Lower numbers are for smaller screws and softer materials, while higher numbers are for larger screws and harder materials. The drill symbol typically indicates maximum torque for drilling.
- Configuració de velocitat: A speed selector switch (usually on top of the tool) allows you to choose between high and low-speed ranges. Use low speed for high-torque applications (e.g., driving large screws) and high speed for faster drilling.
3. Rotació endavant/enrere
A selector switch, usually located above the trigger, controls the direction of rotation:
- Pushing the switch to the left (when viewed from the rear) typically engages forward rotation for driving screws or drilling.
- Pushing the switch to the right engages reverse rotation for removing screws or backing out drill bits.
- Centering the switch locks the trigger, preventing accidental startup.
4. Operating as an Impact Wrench/Screwdriver
The Yato YT-82786 functions as both an electric screwdriver and an impact wrench. The impact function provides additional rotational force to drive fasteners more effectively, especially in tough materials or for loosening stubborn bolts.
- For general screwdriving, select an appropriate torque setting.
- For applications requiring higher torque or for loosening/tightening nuts and bolts, the impact mechanism will engage automatically when resistance is met. Ensure you are using impact-rated bits or sockets.
Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim de la vostra eina.
- Neteja: Mantingueu netes les obertures de ventilació de l'eina per evitar el sobreescalfament. Utilitzeu un drap suau i sec.amp drap per netejar l'eina. No utilitzeu productes químics agressius ni netejadors abrasius.
- Cura de la bateria: Guardeu les piles en un lloc fresc i sec, allunyat de la llum solar directa. No emmagatzemeu les piles completament descarregades durant períodes prolongats. Carregueu-les periòdicament si no les feu servir.
- Manteniment del mandril: Periodically clean the chuck jaws to ensure proper grip on bits. Remove any dust or debris.
- Emmagatzematge: Store the tool and its accessories in a dry, secure location, out of reach of children.
- Inspecció: Regularly inspect the tool for any signs of damage, loose screws, or worn parts. Do not use a damaged tool.
Resolució de problemes
Aquí teniu alguns problemes comuns i les seves possibles solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| L'eina no s'encén | Battery not charged or improperly installed; Trigger lock engaged | Charge battery fully and ensure it is securely attached; Disengage the forward/reverse selector switch from the center (locked) position. |
| La bateria no es carrega | Charger not plugged in; Faulty battery or charger | Ensure charger is properly connected to power; Check charger indicator lights; Try a different outlet; If problem persists, contact support. |
| Reducció de potència o rendiment | Low battery charge; Incorrect torque/speed setting; Worn or dull bit | Recharge battery; Adjust torque/speed settings for the task; Replace bit if dull or damaged. |
| La broca rellisca al mandril | Chuck not tightened sufficiently; Dirty chuck jaws; Damaged bit shank | Ensure chuck is tightened firmly; Clean chuck jaws; Use bits with undamaged shanks. |
Si trobeu problemes que no figuren aquí o si les solucions no resolen el problema, poseu-vos en contacte amb l'atenció al client.
Especificacions
| Característica | Especificació |
|---|---|
| Model | YT-82786 |
| Certificació | CE |
| IP Code (International Protection) | IP20 (Protected against solid objects >12.5mm) |
| Tecnologia de bateries | Ió de liti |
| Volum d’entrada de CAtage | 18 V |
| Pes | 1.3 kg |
| Quantitat per paquet | 1 peça(s) |
| Característiques clau | Powerful Performance, Fast Charging Lithium Battery, Ergonomic Design |
Consells per a l'usuari
Tot i que no hi ha cap usuari específicviews or Q&A were provided for this product, here are some general tips for maximizing your experience with cordless drills/impact wrenches:
- Match the Bit to the Task: Always use the correct type and size of drill bit or driver bit for the material and fastener you are working with. Using the wrong bit can damage the bit, the fastener, or the workpiece.
- Pre-Drill Pilot Holes: For larger screws or in harder materials, drilling a pilot hole can prevent wood splitting and make driving easier.
- Use Impact Function Wisely: The impact function is excellent for driving long screws or tightening/loosening stubborn bolts. However, for delicate work or materials that might be damaged by impact, use a lower torque setting without engaging the impact.
- Keep Batteries Charged: Lithium-ion batteries perform best when not allowed to fully discharge repeatedly. Charge them after use and before long storage periods.
Garantia i Suport
For warranty information, technical support, or service inquiries regarding your Yato YT-82786 Electric Screwdriver and Impact Wrench, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.
