Manual d'usuari del controlador LED SPI 3 en 1 Miboxer i del comandament a distància del panell SPI B6 2.4G

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Miboxer 3-in-1 SPI LED Controller (Model: SPIR3) and the B6 2.4G SPI Panel Remote. This system is designed to control single color, RGB, and RGBW SPI LED strips, offering versatile lighting control for various applications.

Image: Miboxer SPIR3 Controller and B6 Remote (black and white versions).

2. Safety Information and Attention

• Quan instal·leu el dispositiu, apagueu l'alimentació per garantir la seguretat.
• Comproveu si el vol d'entradatage és coherent amb el dispositiu.
• Els usuaris no professionals no poden desmuntar el dispositiu directament, en cas contrari el dispositiu es podria danyar.
• Do not use the device near large metal areas or strong magnetic areas, as it will affect the signal and control distance.
• Do not use the remote in humidity or high temperature areas.
• Take out batteries if not using the remote frequently and keep it in a dry or static electricity area.
• This remote control is only compatible with Miboxer SPI LED controllers (SPIR3/SPIR3-M).

3. Característiques del producte

3.1 SPIR3 3-in-1 SPI LED Controller (2.4GHz)

• 3-in-1 functionality: Supports Single color, RGB, and RGBW SPI LED strips.
• Pixel Dots: Single color (2048), RGB (1536), RGBW (1024).
• Output Signal: SPI (TTL) 800Kbps.
• Setting ON/OFF time and color.
• Total 20 dynamic modes with support for editing their colors.
• DND (Do Not Disturb) function: Retains status (lights on or off) after power outage, useful for power failure areas to save power.
• 2.4GHz wireless transmission technology for high-speed, stable signal, and strong anti-interference.
• Supports communication with multiple devices and control of multiple devices simultaneously.
• Magnetic holder with simple installation.
• Wide application for commercial or home lighting.

3.2 B6 SPI Panel Remote (2.4GHz)

• Aligns color and adjusts length (number of Pixel points) of SPI strip.
• Selects dynamic mode and controls speed.
• Saves scenes.
• Changes dynamic mode, color, brightness, and dynamic lighting features.
• Edits width and color for dynamic mode.
• Sets time and color for ON/OFF.
• Works with multiple controllers (control distance 30m).
• Magnetic holder for simple installation.

4. Especificacions

4.1 SPIR3 3-in-1 SPI LED Controller

Mides: 74.5 mm x 36 mm x 17 mm

Image: SPIR3 Controller Features and Parameters, including dimensions and certifications.

4.2 B6 SPI Panel Remote

Dimensions: 86mm x 86mm x 15mm (Panel), 86mm x 86mm x 5mm (Magnetic Base)

Image: B6 Remote Dimensions and Packaging, showing the panel and magnetic base dimensions.

5. Contingut del paquet

El paquet normalment inclou:

• 1 x Miboxer SPIR3 3-in-1 SPI LED Controller (2.4GHz)
• 1 x Miboxer B6 SPI Panel Remote (2.4GHz) (Note: AAA batteries are not included)
• Manual d'usuari (aquest document)

Image: SPIR3 Controller and accessories in its retail box.

Image: B6 Black Remote and manual in its retail box.

6. Configuració i instal·lació

6.1 SPIR3 Controller Wiring

Connect the SPIR3 controller to your power supply and LED strip as shown in the diagram below. Ensure correct polarity (V+ and V-) and proper connection to the SPI LED strip's data lines (DO1, DO2) and ground (GND).

Image: Connection Diagram for SPIR3 Controller with power supply, SPI LED strip, and optional PUSH switch. It also shows the remote control signal path.

Entrada: DC5V-24V

Sortida: V+, GND, DO1, DO2 (for SPI LED strip)

An optional PUSH switch can be connected for basic ON/OFF control.

6.2 B6 Remote Installation

The B6 remote uses 2x AAA batteries (not included). Install them into the battery compartment. The remote comes with a magnetic base for easy mounting on a wall or other magnetic surfaces.

1. Fix the double-sided tape on the back of the base.
2. Attach the base securely to your desired surface.
3. Install 2x AAA batteries into the remote.
4. The remote is magnetized to the base.

Image: Step-by-step guide for installing the B6 remote control, including battery insertion and mounting the magnetic base.

6.3 Linking the Remote to the Controller

The controller must be linked with the remote before use.

1. Power off the controller for 10 seconds and then turn it on again.
2. Within 3 seconds of powering on, short press the "ON" button on the remote 3 times.
3. If successful, the connected light strip will flash green 3 times slowly.

Attention: If linking fails (light doesn't flash), repeat the steps. You cannot link a remote that has already finished linking.

Image: Visual guide for linking the B6 remote to the SPIR3 controller.

6.4 Unlinking the Remote from the Controller

To unlink a remote from the controller:

1. Power off the controller for 10 seconds and then turn it on again.
2. Within 3 seconds of powering on, short press the "ON" button on the remote 5 times.
3. If successful, the connected light strip will flash red 10 times quickly.

Attention: If unlinking fails (light doesn't flash), repeat the steps. There is no need to unlink if the light has never been linked.

Image: Visual guide for unlinking the B6 remote from the SPIR3 controller.

7. Instruccions de funcionament

7.1 Control remotview (B6)

The B6 remote features various controls for your LED strip:

Image: Diagram illustrating the buttons and indicators on the B6 remote control, including ON/OFF, RGB/RGBW/Pixel number/Speed/Brightness sliders, Dynamic Mode (M), and Scene buttons (S1, S2, S3).

• ON/OFF: Power on/off the LED strip.
• RGBW: Change color of pure static lighting.
• RGB: Canvia de color.
• Número de píxels: Change length or width (more information in setting).
• Velocitat: Change dynamic mode speed.
• Brillantor: Dim brightness.
• Canvi: Short press to change color of dynamic mode. Long press to change direction of dynamic mode.
• Dynamic Mode (M): Short press to change dynamic mode.
• Scene (S1, S2, S3): Long press to save a scene.

7.2 Output Mode Setting (SPIR3 Controller)

The SPIR3 controller supports Single color, RGB, and RGBW output modes. You can switch between these modes using the "SET" button on the controller.

• Single color mode: Press the SET key repeatedly until the indicator turns red.
• Mode RGB: Press the SET key repeatedly until the indicator turns green.
• RGBW mode: Press the SET key repeatedly until the indicator turns blue.

Image: Close-up of the SPIR3 controller showing the "SET" button and indicator lights for output mode selection (Red for Single Color, Green for RGB, Blue for RGBW).

7.3 Advanced Settings (Using B6 Remote)

These settings are performed using the B6 remote after linking.

7.3.1 Setting the Color Sequence from Strip Light

Long press "OFF" for 5 seconds until the light strip lights up a single color.

• Flashing red: Short press red area.
• Flashing green: Short press green area.
• Flashing blue: Short press blue area.
• Flashing white: Short press "ON/OFF" button.

The system automatically closes after the setting is complete.

Image: Visual guide for setting the color sequence of the LED strip using the B6 remote.

7.3.2 Setting Length (Pixel Number: mini 8pt, max 2048pt)

Long press "ON" for 5 seconds until the light strip lights up white color and the last point is blinking.

• Slide to change length.
• Short press to add one pixel point.
• Long press to add pixel points continuously.
• Short press to reduce one pixel point.
• Long press to reduce pixel points continuously.

Short press "ON/OFF" to exit once setting is done.

7.3.3 Setting Width for Dynamic Mode

Slide the pixel number control to change the pixel point number and get different lengths for dynamic mode, which has various sections.

7.3.4 Setting Time and Color for ON/OFF

Short press "OFF" 5 times to enter into running ON/OFF setting.

• Slide "Speed" to set time for ON/OFF.
• Slide "RGB" to set color for ON/OFF.

Short press "ON/OFF" to exit once setting is done.

7.3.5 Turn On/Off Do Not Disturb Mode (DND)

The DND mode is applicable to areas with frequent power outages to save energy.

Activa el mode No Molestis:

• Short press the "OFF" button 3 times within 3 seconds.
• Then short press the "ON" button 3 times.
• The light flashes 4 times to indicate success.

Nota: Quan el lamp es torna a encendre després d'una apagadatage, el seu estat (llums enceses o apagades) romandrà igual que abans de l'apagadatage.

Desactiva el mode No Molestis:

• Short press the "ON" button 3 times within 3 seconds.
• Then short press the "OFF" button 3 times.
• The light flashes 4 times slowly to indicate successful shutdown.

Nota: Quan el lamp es torna a encendre després d'una apagadatage, el seu estat estarà activat per defecte.

Image: Instructions for setting ON/OFF time and color, and activating/deactivating Do Not Disturb mode.

8. Manteniment

• Clean the devices with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the remote control batteries are replaced when they run low to maintain optimal performance.
• Keep the devices away from excessive heat, direct sunlight, and moisture.

9. Solució De Problemes

• Light strip not responding to remote:
  • Assegureu-vos que el controlador estigui encès.
  • Check if the remote batteries are installed correctly and have sufficient charge.
  • Verify that the remote is properly linked to the controller (refer to Section 6.3).
  • Ensure the remote is within the 30m control distance.
  • Check for strong magnetic fields or large metal objects that might interfere with the 2.4GHz signal.
• Incorrect color or mode:
  • Verify the output mode setting on the SPIR3 controller (Section 7.2).
  • Adjust settings using the B6 remote (Section 7.3).
• Controller not functioning:
  • Comproveu el vol d'entradatage to ensure it is within DC5V~24V.
  • Ensure all wiring connections are secure and correct.
  • If the device was disassembled by a non-professional, it might be damaged.

10. Consells d'usuari

• For optimal performance, ensure the controller and remote are not obstructed by large metal objects.
• Experiment with the dynamic modes and scene saving features to personalize your lighting experience.
• Utilize the DND function in areas prone to power fluctuations to maintain your preferred lighting state.

11. Garantia i Suport

The Miboxer SPIR3 controller comes with a 2-year warranty. For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.