Manual d'usuari de la placa base SOYO SY-Classic B660M 2.5G DDR4

1. Introducció

This manual provides detailed instructions for the installation, configuration, and operation of your SOYO SY-Classic B660M 2.5G DDR4 Motherboard. Designed for high performance, this motherboard supports Intel 12th and 13th Generation Core CPUs with an LGA 1700 socket, features dual-channel DDR4 memory, a 2.5G network card, and robust power delivery for a stable computing experience.

Please read this manual thoroughly before beginning the installation process to ensure proper setup and to maximize the performance and longevity of your system.

2. Informació de seguretat

• Desconnecteu sempre la font d'alimentació de l'ordinador abans d'instal·lar o treure qualsevol component.
• Porteu una polsera antiestàtica per evitar danys per descàrrega electrostàtica (ESD) als components sensibles.
• Manegeu la placa base per les vores per evitar tocar els components sensibles.
• Assegureu-vos de ventilar adequadament la carcassa del vostre PC per evitar que s'escalfi.
• Nota important: The CR2032 battery (CMOS battery) is removed from the motherboard before shipping due to international shipping regulations. You will need to install a CR2032 battery (not included) for the motherboard to retain BIOS settings and system time.

3. Contingut del paquet

Si us plau, comproveu el contingut del paquet en rebre'l. Si falta algun article o està malmès, poseu-vos en contacte amb el vostre venedor immediatament.

• SOYO SY-Classic B660M 2.5G Motherboard
• 2 x M.2 SSD fixing screws (studs + screws)
• 1 x cable SATA
• (CR2032 battery not included due to shipping restrictions)

4. Producte acabatview

The SOYO SY-Classic B660M 2.5G is a MATX form factor motherboard (22.5*19.5cm) designed for modern computing needs.

4.1 Característiques clau

• Suport de CPU: LGA1700 socket for Intel 12th and 13th Generation Core Processors.
• Disseny de potència: 50A high specification Dr.MOS, 8+1+1 phase enhanced digital power supply, 8Pin enhanced contact CPU power supply.
• Memòria: Dual-channel dual-slot DDR4 memory interface.
• Emmagatzematge: 1 x PCIe X4 rate M.2 interface (supports 2280/2240 specifications), 3 x SATA3_6G rate interfaces.
• Ranures d'expansió: 1 x PCIe 4.0 X16 enhanced interface, 1 x PCIe 3.0 X1 interface.
• Xarxa: Integrated 2.5G network card (RTL8125B chip).
• Sortida de vídeo: 1 x HDMI interface, 1 x VGA interface (supports dual-screen output with integrated graphics).
• Connectivitat USB: 4 x rear I/O USB3.2 Gen1, 1 set of front USB3.2 Gen1 pins, 2 x rear I/O USB2.0, 1 set of front USB2.0 pins.
• Eines de diagnòstic: Debug lights (CPU, DRAM, VGA, BOOT) for fault judgment, CLRCmos button for quick BIOS reset.

4.2 Panell d'E/S posterior

El panell d'E/S posterior inclou:

• Port VGA
• Port HDMI
• Ports USB 2.0
• Ports USB 3.2
• 2.5G Network Port
• 5.1 Channel Audio Jacks

5. Instruccions de configuració

5.1 Instal·lació de la CPU

1. Localitza el sòcol de la CPU LGA1700 a la placa base.
2. Obriu la palanca del sòcol de la CPU i aixequeu la placa de càrrega.
3. Carefully align the CPU with the socket, ensuring the triangular mark on the CPU matches the mark on the socket. Do not force the CPU into place.
4. Baixeu la placa de càrrega i fixeu-la amb la palanca.
5. Apply thermal paste to the CPU and install the CPU cooler. Note: Only LGA1700 compatible radiators are supported. LGA15XX radiators are not compatible.

5.2 Instal·lació de memòria (RAM)

1. Locate the dual DDR4 memory slots.
2. Obriu els clips dels dos extrems de la ranura de memòria.
3. Alineeu l'osca del mòdul de memòria DDR4 amb la clau de la ranura.
4. Premeu fermament els dos extrems del mòdul de memòria fins que els clips encaixin al seu lloc.
5. For dual-channel performance, install memory modules in matching slots as indicated in the motherboard manual (refer to the silkscreen on the motherboard).

5.3 Instal·lació SSD M.2

1. Localitzeu la ranura M.2 a la placa base.
2. Inseriu l'SSD M.2 a la ranura amb un angle de 30 graus.
3. Push the SSD down and secure it with the provided M.2 screw. The M.2 interface supports 2280/2240 specifications.

5.4 Connexió de dispositius SATA

Connect your SATA hard drives or SSDs to the 3 SATA3_6G rate interfaces using the provided SATA cable.

5.5 Instal·lació de la targeta d'expansió

Install your graphics card into the PCIe 4.0 X16 slot. Other expansion cards can be installed in the PCIe 3.0 X1 slot.

5.6 Front Panel and Fan Connections

• Connect the front panel connectors (power button, reset button, HDD LED, power LED, front USB, front audio) to the corresponding headers on the motherboard. The pin layout is designed to be easier to distinguish for convenient installation.
• Connect case fans and CPU cooler fans to the 4 x 4Pin fan interfaces on the motherboard.

5.7 Connexions d'alimentació

• Connecteu el connector d'alimentació ATX de 24 pins de la font d'alimentació a la presa d'alimentació principal de la placa base.
• Connect the 8-pin enhanced contact CPU power supply connector to the CPU power socket.

5.8 CMOS Battery Installation

As mentioned in the safety section, you will need to install a CR2032 coin cell battery into the designated battery holder on the motherboard. Ensure the positive (+) side of the battery faces upwards.

6. Instruccions de funcionament

6.1 Arrencada inicial i configuració de la BIOS

1. Després de muntar tots els components, connecteu el monitor, el teclat i el ratolí.
2. Power on your system. Press the 'DEL' key (or F2, F10, F12 depending on BIOS version) repeatedly during startup to enter the BIOS/UEFI setup utility.
3. Configure essential settings such as boot order, date/time, and enable XMP for memory if desired.
4. Deseu els canvis i sortiu de la BIOS.

6.2 Actualitzacions de la BIOS

The SOYO SY-Classic B660M 2.5G motherboard can be updated to the latest BIOS version B1.4G to support 13th generation Intel Core CPUs. Visit the official SOYO website for the latest BIOS files and detailed update instructions. Always exercise caution when updating the BIOS.

6.3 Instal·lació del controlador

After installing your operating system, install the necessary drivers for the chipset, network card, audio, and any other integrated components. Drivers are typically provided on a CD/DVD with the motherboard or can be downloaded from the official SOYO weblloc.

7. Manteniment

• Keep your computer's interior clean and free of dust. Use compressed air to periodically clean fans and heatsinks.
• Ensure good airflow within your PC case to maintain optimal operating temperatures.
• Regularly check for and install updated drivers and BIOS versions from the official SOYO website to ensure system stability and performance.

8. Solució De Problemes

8.1 Debug Lights

The motherboard features debug lights for CPU, DRAM, VGA, and BOOT. These lights illuminate to indicate the component currently being initialized or where a fault has occurred during the boot process. This helps in quickly identifying the source of boot issues.

• CPU Light: Indica un problema amb la CPU.
• DRAM Light: Indica un problema amb la memòria.
• VGA Light: Indicates an issue with the graphics card or integrated graphics.
• BOOT Light: Indica un problema amb el dispositiu d'arrencada.

8.2 CLRCmos Button

The onboard CLRCmos button allows you to quickly restore BIOS settings to their default values. If you encounter system instability after changing BIOS settings, press this button (usually while the system is off and power is disconnected, then reconnect power and boot) to revert to stable settings.

8.3 Problemes generals

• Sense pantalla: Check power connections to the motherboard and graphics card. Ensure the monitor cable is securely connected. Try reseating the graphics card and RAM.
• Inestabilitat del sistema: Ensure all components are properly seated. Check for overheating. Update BIOS and drivers.
• Problemes de compatibilitat: If you encounter compatibility, BIOS, or system problems, please contact customer service for technical assistance.

9. Especificacions

10. Consells d'usuari

• BIOS Update for 13th Gen: If you are using an Intel 13th Gen CPU, ensure you update the BIOS to version B1.4G or later for full compatibility and optimal performance.
• Bateria CMOS: Remember to purchase and install a CR2032 battery for the motherboard to save BIOS settings and maintain accurate time.
• Refrigeració: Given the robust power delivery, ensure you have adequate cooling for your CPU and good case airflow, especially for demanding tasks.
• Driver Downloads: Always download the latest drivers directly from the official SOYO website for the best compatibility and performance.

11. Garantia i Suport

The SOYO SY-Classic B660M 2.5G Motherboard comes with a 3-year warranty.

For technical support, warranty claims, or any issues related to compatibility, BIOS, or system problems, please contact the customer service of your vendor or the official SOYO support channel. Provide your product model and purchase details for faster assistance.