JIKEFUN FX9672 SR72

JIKEFUN FX9672 RC Plane Instruction Manual

Model: FX9672 SR72

1. Introducció

Gràcies per la compraasing the JIKEFUN FX9672 RC Plane. This 4-channel 2.4G wireless remote control aircraft features a concealed culvert design, powerful motors, and a durable EPP foam body, making it suitable for both beginner and intermediate pilots. This manual provides essential information for safe assembly, operation, and maintenance of your new RC plane.

2. Informació de seguretat

⚠️ Avís legal: Només per a ús recreatiu. Es prohibeix la modificació il·legal de drons/avions. Si us plau, presteu atenció també a les lleis i regulacions pertinents sobre l'ús de drons/avions al vostre país/zona per garantir-ne l'ús legal.

  • Always operate the RC plane in open areas, away from people, animals, buildings, and power lines.
  • No voli amb vents forts o condicions meteorològiques adverses.
  • Keep fingers and loose clothing away from propellers when the plane is powered on.
  • Ensure batteries are charged correctly and handled safely.
  • Es recomana la supervisió d'un adult per a usuaris menors de 14 anys.

3. Contingut del paquet

Marqueu la casella per assegurar-vos que hi hagi tots els elements:

  • Caixa Original
  • Aircraft (FX9672 RC Plane)
  • Control remot
  • Cable de càrrega USB
  • Batteries (for aircraft)
  • Instruccions de funcionament (aquest manual)
  • Set de trens d'aterratge
  • Positive and Negative Culvert Power (1 pair)
Package contents of the FX9672 RC Plane, showing the plane, remote control, and accessories laid out.
Figure 3.1: Contents of the FX9672 RC Plane package.

4. Especificacions

CaracterísticaEspecificació
Nom del modelFlying Bear FX9672 Culvert Aircraft
Temps de volUns 5 minuts
Temps de càrregaUns 45 minuts
Mode de controlFour-channel 2.4G Wireless Remote Control
Distància RemotaMés de 150 metres
MaterialEPP Foam + ABS Plastic
Pes de l'avió110 g
Cable de càrregaUSB charging cable with protective plate
Dimensions (Aircraft)470 mm (llargada) x 325 mm (amplada)
Bateria del controlador3*AAA (Not Included)
Nivell d'habilitat de l'operadorPrincipiant, Intermedi
Ús interior/exteriorA l'aire lliure
Canals de control4 canals
Diagram showing the dimensions of the FX9672 RC Plane and its packaging.
Figura 4.1: Dimensions del producte.

5. Configuració

5.1. Instal·lació del tren d'aterratge

Attach the landing gear set to the designated slots on the underside of the aircraft. Ensure they are securely fastened for ground take-off and landing.

5.2. Battery Installation (Aircraft)

  1. Locate the battery compartment on the top of the aircraft. It features a splash-proof design.
  2. Open the compartment and insert the provided lithium battery.
  3. Tanqueu el compartiment de manera segura.
Diagram showing the battery compartment location and internal battery of the FX9672 RC Plane.
Figure 5.1: Battery Compartment Location.

5.3. Instal·lació de la bateria (comandament a distància)

  1. Obriu la tapa de la bateria a la part posterior del comandament a distància.
  2. Introduïu 3 piles AAA (no incloses), assegurant-vos de la polaritat correcta.
  3. Tanqueu la tapa de la bateria.

5.4. Charging the Aircraft Battery

  1. Connect the USB charging cable to the aircraft battery.
  2. Plug the USB end into a suitable power source (e.g., computer USB port, rechargeable battery charger, or cell phone charger).
  3. The indicator light on the charging cable will turn off when charging is complete.

Nota: Charging time is approximately 30-40 minutes. Do not use fast charging. The indicator light automatically turns off upon completion.

Image showing various methods to charge the RC plane battery using the USB charging cable.
Figure 5.2: USB Special Charging Cable and Charging Methods.

6. Instruccions de funcionament

6.1. Control remot sobreview

Diagram of the remote control for the FX9672 RC Plane, labeling the throttle lever, rudder gear, trim adjustments, and mode switch.
Figure 6.1: Remote Control System Layout.
  • Palanca de l'accelerador: Controls the aircraft's speed and altitude.
  • Rudder Gear: Controls left/right turning.
  • Ascensor: Controls pitch (climb/descend).
  • Ajustos de retall: Fine-tune controls for stable flight (Head down/up, Left/Right turning, Left/Right steering).
  • A/B/C Three-Gear Mode Switch: Selects flight stability and stunt capabilities.

6.2. Flight Modes (Three-Speed Mode)

The FX9672 offers three flight modes for varying skill levels and environments:

Diagram illustrating the three-speed flight modes (6G/6G2/3D) for the RC plane.
Figure 6.2: Three-Speed Mode Switching.
  • Gear A (6G - Small Angle Climbing): Suitable for windy conditions and large open fields. Provides stable flight with a 6-axis gyroscope self-stabilizing system.
  • Gear B (6G - Large Angle Climbing): Allows for more dynamic maneuvers while maintaining stability.
  • Gear C (3D Stunt Mode): Disables some stabilization for advanced aerobatics and stunts.

6.3. Take-off Modes

The FX9672 supports two take-off methods:

Diagram showing two take-off methods: Ground Take-off and Hand Toss Take-off for the RC plane.
Figure 6.3: Dual Mode Takeoff.
  1. Ground Take-off:
    Place the airplane on the ground with the wind. Ensure the rudder surface has no center return and the rudder surface direction is correct. After confirming, gradually push the throttle stick to 100% and gently pull the lift/tower stick to make the airplane leave the ground.
  2. Hand Toss Take-off:
    Push the throttle rocker to the front. The propeller will rotate at high speed. Align with the wind level, slightly diagonally upward, and throw the aircraft to a certain altitude. Control the joysticks to maintain flight altitude.

6.4. Controls bàsics de vol

Diagram illustrating basic flight maneuvers: Left-leaning, Right-leaning, Climb, and Downward Tilt.
Figure 6.4: Basic Flight Maneuvers.
  • Left-leaning / Right-leaning: Use the rudder control to bank the plane left or right.
  • Climb / Downward Tilt: Use the elevator control to ascend or descend.

6.5. Performing Aerial Stunts

In 3D Stunt Mode (Gear C), the remote control can be operated to realize various aerial stunts. Practice in open spaces and at a safe altitude.

Image showing the FX9672 RC Plane performing various aerial stunts.
Figure 6.5: Aerial Stunts in 3D Mode.

6.6. Vídeo del producte

Video 6.1: Demonstration of the FX9672 RC Plane in flight, including take-off and various maneuvers.

7. Manteniment

  • Neteja: Wipe the aircraft body with a soft, dry cloth after each use to remove dirt and debris.
  • Hèlixs: Regularly check propellers for damage. Replace any bent or broken propellers to ensure optimal flight performance and safety.
  • Cura de la bateria: Guardeu les bateries en un lloc fresc i sec. No les sobrecarregueu ni les descarregueu massa. Si no les feu servir durant un període prolongat, carregueu la bateria fins a aproximadament un 50% de la seva capacitat.
  • Emmagatzematge: Store the RC plane in its original packaging or a protective case to prevent damage.
  • Soft Rubber Head: The aircraft features a soft rubber head for impact resistance. Inspect it periodically for wear and tear.
Image highlighting key features for durability and maintenance: soft rubber head, 2S high rate lithium battery, and upgraded landing gear.
Figure 7.1: Key Durability Features.

8. Solució De Problemes

ProblemaCausa possibleSolució
Plane does not respond to remote.Low battery in plane or remote; Not paired; Out of range.Charge plane battery, replace remote batteries. Ensure plane and remote are powered on and paired. Stay within 150m range.
Plane flies erratically or drifts.Trim settings incorrect; Damaged propeller; Strong wind.Adjust trim controls on the remote. Check and replace damaged propellers. Avoid flying in strong winds.
Temps de vol curt.Bateria no completament carregada; Bateria antiga.Ensure battery is fully charged (approx. 45 mins). Consider replacing old batteries.
Difficulty performing stunts.Incorrect flight mode; Insufficient practice.Switch to 3D Stunt Mode (Gear C). Practice basic maneuvers before attempting complex stunts.

9. Consells d'usuari

  • La pràctica fa la perfecció: For new pilots, start with Gear A (6G mode) in a wide-open, calm area to get accustomed to the controls. Gradually progress to Gear B and then 3D Stunt Mode as your skills improve.
  • Wind Awareness: While the 6G mode offers some wind resistance, always check wind conditions before flying. Strong winds can make control difficult and increase the risk of damage.
  • Gestió de la bateria: Always ensure your aircraft battery is fully charged for maximum flight time. Carry spare AAA batteries for your remote control.
  • Comprovació prèvia al vol: Before each flight, quickly inspect the plane for any visible damage, especially to the propellers and landing gear. Ensure the battery is secure.

10. Garantia i Suport

For any issues or questions regarding your JIKEFUN FX9672 RC Plane, please contact the seller or manufacturer's customer support. Refer to your purchase documentation for specific warranty details and contact information.

Documents relacionats - FX9672 SR72

Preview SHANTOU FEI XIONG TOYS FACTORY Product Model Declaration
Declaration from SHANTOU FEI XIONG TOYS FACTORY confirming that various FX series toy models share identical PCB layouts, internal structures, and electrical circuits, with differences limited to appearance, color, and model names for commercial purposes.
Preview OLEDER OLEO5 SUPERSLIM Magnetic Track Lighting System
Explore the OLEDER OLEO5 SUPERSLIM, a versatile 48V magnetic track lighting system. Discover its ultra-compact design, smart control options (2.4G, Tuya, Zigbee), and a wide range of compatible light fixtures and accessories for modern interior lighting solutions.