1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of the JH-01 Meter Dashboard LCD Display and the 36V 19A Brushless Controller. This system is designed to provide efficient and reliable control for electric scooters and e-bikes, ensuring steady speed, sensitive braking, and precise direction changes.
The controller is constructed from high-intensity aluminum alloy, making it shock-resistant and durable. Its intelligent design facilitates effective heat dissipation, protecting internal circuits. The display unit is made from high-quality plastic, offering high strength and ease of installation.
2. Contingut del paquet
Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:
- 1x 36V 19A Brushless Motor Controller
- 1x JH-01 LCD Display Unit (with 6-pin connector)
- 1x Display Connection Cable
- Assorted Wiring Harnesses for Controller (power, motor phase, accessories)
3. Especificacions
Controlador de motor
| Característica | Descripció |
|---|---|
| Material | High-intensity Aluminum Alloy |
| Voltage | 36 V |
| Actual | 19A |
| Tipus de motor | Brushless (without Hall sensor support) |
| Dimensions (L x A x A) | 90.5 mm x 52.5 mm x 29.5 mm |
| Protecció | Shock-resistant, effective heat dissipation |
JH-01 LCD Display Unit
| Característica | Descripció |
|---|---|
| Material | Plàstic d'alta qualitat |
| Tipus de connector | 6 pins |
| Característiques | High strength, durable, compact, lightweight |
Informació del paquet
| Dimensió | Valor |
|---|---|
| Longitud | 17 cm |
| Amplada | 15 cm |
| Alçada | 6 cm |
| Pes | 0.122 kg |
4. Informació de seguretat
- Always disconnect power from the electric scooter/e-bike before attempting any installation, maintenance, or repair.
- Assegureu-vos que totes les connexions estiguin ben fixades i degudament aïllades per evitar curtcircuits.
- This product is intended for use with 36V systems. Using it with incompatible voltagi pot causar danys.
- Professional installation is recommended if you are unfamiliar with electrical systems.
- Ensure the instrument display and controller are compatible with your specific motor model. Incompatible models may not function correctly.
- Keep the controller and display unit away from water and excessive moisture to prevent damage.
5. Guia d'instal·lació
Before beginning installation, ensure the vehicle's power is completely off and the battery is disconnected.
5.1 Instal·lació del controlador
- Select a suitable location for the controller, preferably in a protected area with good airflow to aid in heat dissipation.
- Securely mount the controller using appropriate fasteners.
- Connect the main power cables (typically a yellow XT60 connector for battery input) to your battery.
- Connect the three thick motor phase wires (blue, green, yellow) from the controller to the corresponding motor wires.
- Connect any additional accessory wires such as throttle, brake levers, and other sensors as required by your e-bike/scooter system. Refer to the general wiring diagram below for common connections.
5.2 Display Unit Installation
- Mount the JH-01 LCD Display Unit onto your handlebar using the integrated clamp. Ensure it is positioned for easy viewing and access to buttons.
- Connect the 6-pin connector cable from the display unit to the corresponding port on the brushless motor controller.
5.3 General Wiring Connections
While a specific wiring diagram is not provided, typical connections for a brushless controller and display unit include:
- Potència de la bateria: Connect the main power wires (often red/black, with a high-current connector like XT60) to your battery.
- Motor Phase Wires: Connect the three thick wires (blue, green, yellow) to the corresponding motor phase wires.
- Unitat de visualització: Connect the 6-pin cable from the JH-01 display to the dedicated display port on the controller.
- Acceleració: Connect the throttle signal wire (usually green or white), power (red), and ground (black) to the throttle input on the controller.
- Palanques de fre: Connect brake lever cut-off switches (if present) to the controller. This system supports electronic braking.
- Altres accessoris: Connect any other accessories such as lights or horn to their respective ports on the controller, if available.
6. Instruccions de funcionament
6.1 Engegada/apagada
- To power on the system, press and hold the Botó d'encesa (
) on the JH-01 display unit for a few seconds until the screen illuminates. - Per apagar-lo, manteniu premut el botó Botó d'encesa de nou fins que la pantalla s'apagui.
6.2 Funcions de visualització
The JH-01 LCD display provides essential information about your ride:
- Velocitat: Velocitat actual de conducció.
- Nivell de bateria: Indicació de la càrrega restant de la bateria.
- Mode: Current riding mode or power assist level.
- Altres dades: May include trip distance, total distance, error codes, etc., depending on the specific display firmware.
6.3 Selecció del mode
Utilitza el Botó MODE on the display unit to:
- Cycle through different display information (e.g., ODO, TRIP, Voltagi).
- Adjust power assist levels (if applicable to your system).
- Access basic settings (refer to specific display instructions if available for advanced settings).
7. Manteniment
- Neteja: Keep the controller and display unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
- Connexions: Reviseu periòdicament totes les connexions elèctriques per assegurar-vos que estiguin ben fixades i que no presentin corrosió.
- Inspecció física: Inspect the controller and display for any signs of physical damage, such as cracks, dents, or frayed wires. Address any damage promptly.
- Protecció del medi ambient: While the controller is durable, avoid prolonged exposure to extreme temperatures, direct sunlight, or heavy rain.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El sistema no s'encén | Disconnected battery, low battery charge, faulty power button, loose display connection. | Check battery connection and charge level. Ensure the 6-pin display cable is securely connected. Try pressing the power button firmly. |
| El motor no respon | Loose motor phase wires, faulty throttle, controller issue. | Verify all three motor phase wires are securely connected. Check throttle connection. Ensure the controller is receiving power. Note: This controller is designed for sensorless motors. |
| La pantalla no mostra informació | Loose 6-pin display connection, display unit fault. | Ensure the 6-pin cable connecting the display to the controller is firmly seated. |
| Electronic brake not working | Brake lever sensor disconnected or faulty, controller issue. | Check connections from brake levers to the controller. Ensure brake levers are functioning correctly. |
9. Consells d'usuari
- Comprovació de compatibilitat: Always ensure that the JH-01 display and the 36V 19A controller are compatible with your specific electric scooter or e-bike model before installation. Using mismatched components can lead to malfunction.
- Sensorless Operation: This controller is designed for motors without Hall sensors. If your motor has Hall sensors, ensure it can operate in sensorless mode or consider a different controller.
- Waterproofing Connections: For outdoor use, consider adding extra waterproofing (e.g., electrical tape or sealant) to exposed wire connections to protect against moisture ingress.
- Gestió de cables: Route all cables neatly and secure them to prevent snagging or damage during operation.
10. Garantia i Suport
For any technical assistance, warranty claims, or further inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty purposes.
