DDPAI Dash Cam MINI2X User Manual

1. Presentació del producte

1.1 Aparença

The DDPAI MINI2X Dash Cam features a compact design with various components for optimal functionality. Refer to the diagram below for an overview of its parts.

1.2 Botó de funció

The function button serves multiple purposes:

• Bluetooth authorization: Premsa ràpida
• Restablir: Manteniu premut durant 6 segons

1.3 Indicator Guide

The LED indicator provides visual feedback on the dash cam's current status:

2. Especificacions

3. Instruccions d'instal·lació

3.1 Instal·lació de la targeta de memòria

The DDPAI MINI2X Dash Cam supports Micro-SD cards up to 256GB. Ensure the dash cam is powered off before installation.

1. Instal·leu la targeta de memòria: Insert the memory card halfway into the slot. Use a fingernail or paper clip to push the card inward until it clicks and locks.
2. Traieu la targeta de memòria: Gently push the card's edge inward until it clicks and pops out, then pull it from the slot.

3.2 Instal·lació de la Dash Cam

The dash cam can be powered via a cigarette lighter, fuse box, or OBD interface. The following steps detail the installation process.

Font d'alimentació per a encenedors de cigarrets

1. Wipe the front windshield: Clean the windshield with a soft cloth to ensure the bracket adheres firmly.
2. Power on the Dash Cam: Insert the car charger into the cigarette lighter, then connect the dash cam using the Type-C power cord. The dash cam will automatically start and begin recording when the car starts.
3. Determine installation position and adjust lens angle:
   • Connect the dash cam to your mobile phone via the DDPAI App (refer to Section 4.1).
   • In the DDPAI App, navigate to "Device Settings" > "ADAS intelligent assistance reminder" > "Adjust ADAS installation position".
   • Select "Go to live preview" > "Enter live preview" to access the calibration interface. Follow the on-screen instructions to position the dash cam correctly.
   • After installation, tap "Calibration completed" in the app.
4. Stabilize the Dash Cam:
   • Attach the electrostatic sticker to the chosen installation position on the windshield.
   • Peel off the film from the 3M sticker on the mounting bracket and attach the bracket to the center of the electrostatic sticker.

   Nota:

   Ensure correct direction and position when attaching the 3M sticker. Confirm the recording angle is correct before final attachment.

5. Cablejat: Route the power cord from the cigarette lighter receptacle to the dash cam, hiding it behind the car's plastic guard plate using a crowbar.

Connecteu la caixa de fusibles (cal un kit de cablejat intel·ligent)

This method provides a neat installation and enables parking monitoring. Due to its complexity, professional installation at an automobile service shop is recommended to prevent vehicle damage.

Connect the OBD Interface (OBD Hardwire Kit is Required)

This method is easier to operate and also enables parking monitoring.

1. Plug the Type-C connector of the OBD power cable into the Dash Cam's Type-C port.
2. Connect the other end of the OBD power cable to the vehicle's OBD port.

4. Connexió a l'aplicació

4.1 Descàrrega de l'aplicació DDPAI

To download the DDPAI App, scan the QR code below or search for "DDPai" in the Google Play Store (Android) or App Store (iOS).

4.2 Connexió Bluetooth

For first-time use, connect the Dash Cam to your mobile phone via Bluetooth:

1. Power on the Dash Cam and enable Bluetooth on your mobile phone.
2. Launch the DDPAI App, tap "Device" > "+ Add a device".
3. Select the current device name (e.g., DDP12XXXX) from the detected Bluetooth device list.
4. Press the function button on the Dash Cam to authorize the connection.

4.3 Connexió Wi-Fi

After successful Bluetooth connection, Wi-Fi connection is required to view device albums, settings, or live preview.

Per a iPhones:

1. In the DDPAI App, tap "Go to connection" > "WLAN".
2. In your iPhone's Wi-Fi settings, select the device's Wi-Fi network (e.g., "DDPAI_MINI2X_XXXX").
3. Enter the default password "1234567890" and tap "Join".

Per a telèfons Android:

1. Launch the DDPAI App, go to the "Device" page, tap "+ Add a device", then "Choose your device" > "Device without screen".
2. Tap "Next" > "Connect to Wi-Fi".
3. Select the detected Wi-Fi network (e.g., "DDPAI_MINI2X_XXXX").
4. Enter the default password "1234567890" and tap "Connect".

5. Introducció a la funció

5.1 Funció de vídeo

Tap the outlined area in the app's device interface to enter the live preview.

Preview Vídeo

After connecting to the Dash Cam, enter the real-time preview interface. Tap the landscape preview icon or rotate your phone horizontally (with auto-rotate enabled) for full-screen preview.

Reproducció de vídeo

1. Drag the progress bar to select a starting point.
2. Tap the thumbnail or wait 5 seconds for playback to begin.

Descarrega el vídeo

Mètode 1:

1. Drag the progress bar to select the download start point.
2. Tap the download icon to enter the downloading interface.
3. Tap "Complete" to save the file to your local album.

Mètode 2:

1. Tap the selection icon on the "Device" interface.
2. Mantingueu el vídeo/foto file to enter selection mode.
3. Seleccioneu desitjat files and tap "Download".

5.2 Photographing Function

The Dash Cam supports various photographing modes:

• Collision sensing photography: Automatically takes pictures upon detecting collision or emergency braking.
• Manual photographing: En el preview interface, tap the camera icon to take a photo.
• Voice photographing: Say "Take photo" to the Dash Cam MIC. This generates a photo and a related short video (if "Create related video clip when taking a photo" is enabled).

Viewing fotos/vídeos

• Al dispositiu: Connect the Dash Cam to the app, go to "Device Album" to view files. Files are stored on the recorder's memory, not downloaded to your phone.
• Al teu telèfon: Descarregat files are moved to your phone's local album and can be viewed without connecting to the Dash Cam.

Automatic Download of Snapshot/Emergency Files

In the app, go to "Me" > "APP Settings" and enable "Automatically download snapshot files" / "Automatically download emergency files".

Share/Delete Photos or Videos

In the "Local Album" interface, hold a file to enter selection state, then choose to delete or share.

5.3 Monitorització d'aparcaments

Parking monitoring requires an intelligent hardwire kit (purchased separately). When the vehicle is off, the Dash Cam enters parking monitoring mode. It automatically records photos and videos during emergencies.

To set parking mode and battery protection voltage:

1. Connect the mobile phone to the Dash Cam via the app.
2. Tap "Device Settings" > "Enter after the vehicle has stalled".
3. Select the desired parking monitoring mode.

Mode d'aparcament: gravació de vídeo a intervals

• Enters AOV (low-power) time-lapse recording after the car is off. Shuts down after set time or low voltage, wakes upon ignition.
• If a collision occurs, it takes a photo (file name starts with "G", ends with "X") and records the event. Switches to normal recording, then back to time-lapse after 2 minutes.
• Night vision (AI-ISP technology) activates for clearer night parking recording.

Mode d'aparcament: Gravació de vídeo normal

• Maintains normal recording after the car is off. Shuts down after set time or low voltage, wakes upon ignition.
• If a collision occurs, a photo (file name starts with "G", ends with "L") and an associated short video are taken.

Mode d'aparcament: Repòs

• Enters AOV sleep state after the car is off. Upon collision, enters wake-up recording mode for 30 seconds, then returns to sleep. Shuts down on low voltage, wakes upon ignition.
• If collisions continue, time-lapse recording continues without time limit, using low-voltagprotecció.

5.4 Detecció de col·lisions i vídeos bloquejats

When a collision is detected, the Dash Cam generates an emergency photo and video, stored separately and protected from loop recording deletion.

Configuració de la sensibilitat de la càmera

Adjust sensitivity to control when the dash cam triggers recording. Default is "Medium".

1. Connect to the app, go to "Device" > "Device Settings" > "Adjust collision sensitivity".
2. Select "Driving" / "Parking" and set the appropriate sensitivity (High, Medium-high, Medium, Medium-low, Low, Off, Custom).

Set the duration of related videos during shooting

The default duration is 10 seconds, with options for 20s and 30s.

1. Connect to the app, go to "Device" > "Device Settings" > "Duration of related videos during shooting".
2. Set the desired duration:
• 10s: 5 seconds before and after the event.
• 20s: 10 seconds before and after the event.
• 30s: 15 seconds before and after the event.
• Apagat: Still records 5 seconds before and after the event.

5.5 Sistema avançat d'assistència al conductor (ADAS)

ADAS detects road conditions and provides driving reminders, including voice alerts for front vehicle start and fatigue driving.

Estableix la sensibilitat de l'ADAS

You can enable/disable ADAS and adjust its sensitivity.

1. Connect to the app, go to "Device Settings" > "ADAS Intelligent Assistance Reminder".
2. Choose sensitivity:
• High (Novice driver mode): Wider alarm range, triggers for high and low risks.
• Low (Veteran driver mode): Narrower alarm range, triggers for high risks only.

Set the Voice Reminder

In "Advanced settings", enable/disable voice reminders:

• Voice Reminder for Front Car Starts: Alerts when the vehicle in front moves after a stop.
• Voice Reminder for Fatigue Driving: Prompts to take a break during long drives.

5.6 π Link Connection

The MINI2X supports multi-device interconnection. When two devices are networked, you can view real-time recordings from both on a single phone and perform operations like video playback and downloading.

Networking Process

1. Enceneu els dos dispositius.
2. Add both devices to the DDPAI App via Bluetooth (refer to Section 4.2).
3. On the "Device" interface, tap the "Link" button.
4. When the "Device Networking" pop-up appears, tap "Networking".
5. After successful networking, images from both devices will appear on the "Device" interface.

Canvia de dispositiu

Switch between networked devices by tapping the switch button or the desired device image in the app. The "Device" interface will then display details for the selected device.

Set the Orientation Mark

Set an orientation mark for the secondary device to indicate its lens direction, aiding in file organització.

1. Tap "Device Group Settings" > "Device Orientation Marker".
2. Check the desired mark and tap "OK".

Disconnect Networking

Tap "Disconnect Networking" on the "Device" interface. Video files will be separated into their respective device albums.

5.7 Transmissió de dades

Per accedir a les dades enregistrades:

1. Gently remove the memory card from the dash cam.
2. Insert it into a card reader and connect to a computer.
3. Open the "DCIM" folder to browse or edit photos and videos.

• 200 video: Contains normal and time-lapse parking monitoring videos. Time-lapse files start with "S".
• 201 photo: Contains photos from collision sensors and normal photographs. Normal photos start with "N"; collision-sensing photos start with "G".

6. Manteniment

6.1 Actualització del firmware

Per actualitzar el firmware:

1. Open the DDPAI App, connect to the Dash Cam Wi-Fi.
2. Tap "Me" > "About DDPAI" > "Check version". The app will detect new versions.
3. Follow on-screen instructions to upgrade.

6.2 Precaucions de seguretat

Read all precautions before use to ensure correct and safe operation:

• Do not operate the Dash Cam or view videos on your phone while driving. Prioritize driving safety.
• Do not install the Dash Cam in a location that obstructs your driving view.
• Use only the included power cord to avoid fire, short circuits, or electric shock.
• Use a branded Micro-SD card (up to 256GB). Do not insert or remove the card while the device is on. Format regularly via the app.
• Do not open or repair the Dash Cam yourself. Contact official customer service for issues.
• The Dash Cam can be used in other locations with a suitable adapter.
• If using a power adapter, ensure it meets standard requirements.
• Images in this guide are for reference only; refer to the actual product.

7. Resolució de problemes (FAQ)

1. Com puc formatar una targeta de memòria?

Method 1 (via App): Connect to the app, go to "Camera Settings" > "Storage Management" and select to format.

Method 2 (via Computer): Remove the card, insert into a card reader, connect to computer, right-click the card drive, and select "Format".

2. How to export driving video from the memory card?

Use a card reader to connect the memory card to a computer and export the video files.

3. What is the Wi-Fi password of the Dash Cam?

The default Wi-Fi password is "1234567890".

4. Can I change the Wi-Fi password?

Yes. Connect to the app, go to "Device Settings" > "Device Wi-Fi Password", enter a new password, confirm, and save.

5. How do I reset the Dash Cam?

Press and hold the function button for approximately 6 seconds. The device will automatically restart.

6. What if I forget the Wi-Fi password?

Reset the device by holding the function button for 6 seconds. Then reconnect using the default password "1234567890".

7. Can I turn off voice control if it triggers by mistake?

Yes. Connect to the app, go to the "Device" page, tap "Device Settings", and disable "Local Voice Control".

8. Why does the product feel hot during use?

It is normal for electronic products to heat up. DDPAI products undergo high-temperature testing. The heat is due to dissipation and does not affect normal operation or safety.

8. Garantia i Suport

8.1 Informació de la garantia

The DDPAI MINI2X Dash Cam comes with a 1-year warranty.

DDPAI 365-Day Free Replacement Guarantee

If the product has non-human quality defects within 365 days of delivery (or system auto-confirmation of receipt) and falls within the manufacturer's warranty scope, DDPAI provides a free replacement with a brand-new unit.

Àmbit de la garantia: Covers hardware quality issues and non-human damages that cannot be resolved by software updates only.

What to Provide: Order number + proof of defect (e.g., video, SN code).

9. Consells d'usuari

• Memory Card Quality: Always use high-quality, branded Micro-SD cards (U3 Ultra high speed recommended) to ensure reliable recording and prevent data corruption.
• Configuració inicial: Remember to format your Micro-SD card through the DDPAI App before its first use. This helps prevent errors and ensures optimal performance.
• Supervisió del pàrquing: For 24-hour parking monitoring, the intelligent hardwire kit is essential and must be purchased separately. Consider professional installation for hardwiring.
• Actualitzacions de l'aplicació: Keep your DDPAI App updated to the latest version for the best features and stability.
• Connexió Wi-Fi: If you experience issues connecting via Bluetooth, try connecting directly via the dash cam's 5GHz Wi-Fi network. The default password is "1234567890".
• Interfície d'alimentació: The dash cam uses a Type-C power interface.