70mai Jump Starter PS01 User Manual

1. Introducció

The 70mai Jump Starter PS01 is a portable emergency power solution designed to jump start 12V vehicle batteries and serve as a power bank for electronic devices. With a 11100mAh capacity and 600A peak current, it provides reliable power in various situations, including cold weather conditions.

This device is suitable for 12V vehicles with up to 4.0L gas and 2.0L diesel engines.

2. Contingut del paquet

Si us plau, comproveu el contingut del paquet en rebre'l per assegurar-vos que tots els articles hi són i no estan danyats:

• 70mai Jump Starter × 1
• Cable de càrrega × 1
• Smart Battery Clip × 1
• Bossa d'emmagatzematge × 1
• Manual d'usuari × 1

3. Informació i advertències de seguretat

Llegiu atentament tots els avisos i instruccions de seguretat abans d'utilitzar aquest producte. Si no seguiu els avisos i les instruccions, podeu patir descàrregues elèctriques, incendis i/o lesions greus.

• The device must not be used in place of a car battery.
• Do not use the device as a toy. Closely supervise any children around the device.
• The device is intended for jump starting 12V car batteries only. Do not use for other purposes.
• Use only the provided battery clips. If the battery clip or cable is damaged, do not use the device.
• Do not connect the positive and negative ends of the battery directly.
• Before jump starting, ensure battery connections are free of rust and foreign objects. Connect the device securely.
• After a successful jump start, disconnect the device from the car battery within 30 seconds to prevent damage.
• Do not use the device for more than 3 consecutive times. Allow a 2-minute interval between each jump start to prevent overheating and damage.
• Do not use the clips to charge any other devices.
• Do not place the product in an environment where the temperature exceeds 60℃. Store in a cool environment and avoid direct sunlight if not in use for a long time.
• Charging should be done at room temperature between 0℃ to 45℃.
• Do not expose the device to rain or submerge it in water.
• Do not place the device in extreme heat or in a fire.
• Do not use the product in an environment with explosion risk, such as near flammable liquids or gases, or in the presence of dust.
• Before using, ensure someone is near enough to hear you or provide assistance.
• Remove any metallic objects (rings, bracelets, necklaces) from your body before use.
• To reduce the risk of damage to the power plug and cable, please disconnect the device from the battery clips using the battery clip plug.
• Do not use any damaged or modified batteries. This may lead to unpredictable consequences such as fire, explosion, or injuries.
• Use the provided charging cable or one of similar specification to charge the device.
• Do not charge the device immediately after it has been used to jump start a car battery.
• Do not use the device to jump start a car battery while it is being charged.
• In extreme cases, fluid may leak from the battery. Do not allow fluid to contact hands or skin. In case of contact, wash immediately with soap and water. If fluid gets in eyes, wash with cold water for at least 10 minutes and seek medical attention.
• Dispose of the lithium battery in accordance with local regulations at the end of its service life.

4. Configuració i càrrega

4.1 Càrrega inicial

Before first use, fully charge the 70mai Jump Starter. A full charge takes approximately 8 hours. The device retains approximately 85% of its power after one year of storage when fully charged.

4.2 Connecting the Smart Battery Clip

The smart battery clip connects to the jump starter via a dedicated port. Ensure a firm connection before attempting to jump start a vehicle.

5. Instruccions de funcionament

5.1 Arrencada amb salt d'un vehicle

Follow these steps to jump start a 12V vehicle with a dead battery:

1. Connect the smart battery clip to the 70mai Jump Starter.
2. Obriu el capó del vehicle i localitzeu la bateria del cotxe.
3. Connecteu el cl vermell (+).amp of the smart battery clip to the positive (+) terminal of the car battery.
4. Connecteu el negre (-) clamp of the smart battery clip to the negative (-) terminal of the car battery.
5. Assegureu-vos que totes les connexions estiguin segures i lliures de corrosió.
6. Enter the vehicle and start the engine.
7. Once the vehicle starts, immediately disconnect the smart battery clip from the car battery within 30 seconds.
8. Then, disconnect the smart battery clip from the 70mai Jump Starter.

5.2 Ús com a bateria externa

The 70mai Jump Starter can also be used to charge various electronic devices via its 5V/2.4A Type-C output port.

5.3 Ús de la llum LED

The built-in LED light offers three modes for various situations:

• Mode normal: Provides steady illumination.
• Mode intermitent: Per senyalitzar o cridar l'atenció.
• Mode SOS: Emits the international Morse code distress signal.

6. Manteniment

• Càrrega: Recharge the jump starter fully after each use. If not used for extended periods, charge it every 3-6 months to maintain battery health.
• Emmagatzematge: Store the device in a cool, dry place, away from direct sunlight and temperatures exceeding 60°C. The ideal charging temperature is between 0°C and 45°C.
• Neteja: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the ports are clean and free of debris.

7. Solució De Problemes

• El dispositiu no s'encén: Ensure the device is charged. If it has been stored for a long time, it might require a full charge.
• El vehicle no arrenca:
  • Check that the smart battery clip is securely connected to both the jump starter and the car battery terminals.
  • Ensure the car battery terminals are clean and free of rust or corrosion.
  • Wait 2 minutes between jump start attempts if the first attempt fails. Do not exceed 3 consecutive attempts.
  • Verify that your vehicle's engine size (gas up to 4.0L, diesel up to 2.0L) is compatible with the jump starter.
• Sobreescalfament del dispositiu: If the device feels excessively hot, stop use immediately and allow it to cool down before attempting further operations. This can occur from too many consecutive jump start attempts.
• Fuga de fluids: If fluid leaks from the battery, refer to the safety warnings in Section 3 for handling instructions.

8. Especificacions

9. Consells d'usuari

• Mantingueu-lo carregat: Always ensure your 70mai Jump Starter is adequately charged, especially before long trips or during colder months, to be prepared for unexpected battery issues.
• Neteja els terminals: Regularly check your car battery terminals for any signs of corrosion or dirt. Clean terminals ensure a better connection and more effective jump starting.
• Utilize LED Modes: Familiarize yourself with the Normal, Flashing, and SOS modes of the built-in LED light. These can be crucial for visibility and signaling for help in emergency situations.
• Emmagatzema correctament: When not in use, store the jump starter in its provided storage bag in a cool, dry place to protect it from dust and physical damage.

10. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the official 70mai weblloc web o poseu-vos en contacte amb el vostre distribuïdor. Conserveu el comprovant de compra per a reclamacions de garantia.