1. Introducció
This instruction manual provides essential information regarding the original spare parts for your Roborock Q Revo S and Q Revo Pro robot vacuum cleaners. Regular replacement and proper maintenance of these accessories are crucial for maintaining the cleaning efficiency and extending the lifespan of your device. This guide will cover product identification, compatibility, installation, maintenance, and specifications for each component.
2. Producte acabatview i compatibilitat
These spare parts are designed specifically for the Roborock Q Revo S and Roborock Q Revo Pro robot vacuum cleaner models. Please ensure your robot vacuum model matches the compatible models listed below before installation.
2.1. Models compatibles
- Roborock Q Revo S
- Roborock Q Revo Pro
2.2. Models incompatibles
These parts are NOT suitable for:
- Roborock Q Revo
- Roborock Q Revo MaxV
- Roborock Q Revo Crve
- Roborock Q Revo Master
2.3. Available Spare Parts
The following original spare parts are available:
Acabatview of Roborock Q Revo S/Pro spare parts kit.
3. Configuració i instal·lació
Always power off your robot vacuum cleaner and disconnect it from the charging dock before attempting to replace any parts.
3.1. Instal·lació del raspall principal
- Turn the robot vacuum over.
- Locate the main brush cover and unlatch it.
- Traieu el raspall principal vell.
- Insert the new main brush, ensuring the ends align with the slots. The main brush assembly includes a rubber brush, brush cap, and brush bearing.
- Close the main brush cover until it latches securely.
Real picture of the main brush.
Explotat view of the main brush assembly.
3.2. Instal·lació del raspall lateral
- Turn the robot vacuum over.
- Locate the side brush and unscrew it (if applicable).
- Remove the old side brush.
- Align the new side brush with the post and press it down until it clicks into place, or screw it in if required.
Close-up of a side brush.
Real picture of a side brush.
3.3. Instal·lació del filtre
- Open the robot vacuum's dustbin compartment.
- Traieu la paperera.
- Take out the old filter from the dustbin.
- Insert the new filter into the designated slot in the dustbin.
- Reinstall the dustbin into the robot vacuum.
Washable filter design.
3.4. Instal·lació de la mopa
- Remove the mop module from the robot vacuum.
- Detach the used mop cloth from the module.
- Attach the new mop cloth securely to the mop module.
- Reinstall the mop module onto the robot vacuum.
Mop cloth features: efficient water locking and strong cleaning.
Mop pads attached to the robot vacuum.
3.5. Instal·lació de la bossa de pols
- Open the auto-empty station's dust bag compartment.
- Traieu amb cura la bossa de pols plena.
- Insert a new dust bag into the compartment, ensuring it is properly seated.
- Tanqueu la tapa del compartiment.
Dust bag capacity (2.7L) and auto-empty station integration.
4. Manteniment
Regular maintenance and timely replacement of spare parts are essential for optimal cleaning performance and to prolong the life of your robot vacuum.
- Pinzell principal: Inspect weekly, clean hair and debris. Replace every 6-12 months depending on usage.
- Raspall lateral: Inspect weekly, clean hair and debris. Replace every 3-6 months depending on usage.
- Filtre: Clean weekly by tapping out dust or rinsing with water (if washable). Ensure it is completely dry before reinstallation. Replace every 3-6 months.
- Drap de fregona: Wash after each use. Replace every 1-3 months depending on usage and wear.
- Bossa de pols: Replace when full. The large capacity dust bag allows for up to 7 weeks of use without emptying, depending on usage habits and environmental factors.
5. Solució De Problemes
This section addresses common issues related to spare parts. For comprehensive robot vacuum troubleshooting, please refer to your main robot vacuum manual.
- Rendiment de neteja reduït: Check if brushes are tangled with hair or debris. Ensure filters are clean and not clogged. Replace worn-out parts.
- Sorolls inusuals: Inspect main brush and side brushes for foreign objects or damage. Ensure all parts are correctly installed.
- Dustbin Not Filling / Suction Issues: Check if the dust bag is correctly installed and not full. Ensure the filter is clean and not blocked.
6. Especificacions
| Atribut | Detall |
|---|---|
| Nom de marca | roborock |
| Número de model | Roborock Q Revo S / Q Revo Pro |
| Tipus | Peces de l’aspirador |
| Material | Non-woven Fabric, Silicone, Metal, Plastic |
| Substància química molt preocupant | Cap |
| Origen | Xina continental |
| Pes del paquet | 0.75 kg |
| Dimensions del paquet | 35 cm (llargada) x 25 cm (amplada) x 15 cm (alçada) |
7. Consells d'usuari
- Always use original, high-quality spare parts to ensure compatibility and optimal performance of your robot vacuum.
- Establish a regular replacement schedule for all accessories based on your usage frequency and environment to maintain peak cleaning efficiency.
- For washable filters, ensure they are completely air-dried before reinstallation to prevent mold growth and maintain filtration effectiveness.
- Periodically check brushes for tangled hair or debris, especially if you have pets, to prevent damage and maintain effective cleaning.
8. Garantia i Suport
For any warranty claims or technical support regarding your Roborock Q Revo S or Q Revo Pro robot vacuum cleaner and its original spare parts, please contact Roborock customer service or refer to the official Roborock website for detailed warranty information and support options.
