LASER TREE K1 MAX 60W Laser Engraver Instruction Manual

1. Producte acabatview

The LASER TREE K1 MAX is a high-power diode laser engraving and cutting machine designed for DIY enthusiasts and small businesses. It features an adjustable 60W laser module, offering versatile power options for various materials and applications. The machine boasts an exceptionally large working area of 800x600mm and a maximum engraving speed of 20000mm/min, enabling efficient and precise work.

Característiques principals:

• High Power Laser Module: Built-in 12pcs 5.5W beam compressed laser diodes, delivering 60W+ optical power.
• Potència ajustable: Easily switch between 20W, 40W, and 60W for engraving and cutting tasks.
• Àrea de treball gran: 800x600mm workspace for extensive projects.
• High Engraving Speed: Up to 20000mm/min for rapid processing.
• Accurate Focus: Ensures precise and clean results.
• Air Assist: Improves cutting performance and surface cleanliness.
• Cable Drag Chain: Manages cables for a tidy and safe workspace.
• TF Card Offline Engraving: Allows operation without a continuous computer connection.
• Red Cross Line Locating: Aids in precise material positioning.
• Machine Tilt Detection and Protection: Enhances safety by alarming if the machine is tilted during operation.

Demostració del producte:

Video: Comparison of K1 MAX 60W engraving and cutting capabilities against a 40W laser engraver.

2. Informació de seguretat

WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always wear appropriate laser safety goggles when operating the machine.

• Protecció ocular: Always wear certified laser safety goggles that block the laser's wavelength (450nm) when the laser is active.
• Ventilació: Operate the machine in a well-ventilated area or use an exhaust system to remove fumes and smoke generated during engraving/cutting.
• Perill d'incendi: Laser cutting can ignite flammable materials. Never leave the machine unattended during operation. Keep a fire extinguisher nearby.
• Seguretat del material: Only engrave or cut materials that are safe for laser processing. Avoid materials that produce toxic fumes or can catch fire easily.
• Estabilitat de la màquina: Ensure the machine is placed on a stable, level surface. The built-in tilt detection system will alert you if the machine is moved or tilted during operation.
• Nens i animals de companyia: Mantingueu els nens i les mascotes lluny de la zona d'operacions.
• Parada d'emergència: Familiaritzeu-vos amb la ubicació i la funció del botó d'aturada d'emergència.

3. Contingut del paquet

The LASER TREE K1 MAX 60W package includes the following components:

Imatge: Detallada view of all components included in the LT-K1 Max 60W package.

• X-Axis Assembly x1
• Y-Axis Assembly x2
• Front Frame x1
• Rear Frame x1
• X-Axis Pulley Fixing Plate x1
• Support Feet x3
• Main Control Box x1
• Y-Axis Timing Belt x2
• Main Cable x1
• Adaptador d'alimentació x1
• Cable de CA x1
• Lector de targetes x1
• TF Card x1
• USB cable x1
• Laser Module x1 (60W)
• Spare Laser Protective Lens x2
• Air Assist Pump x1
• Honeycomb Panel x1
• Desktop Protection Plate x1
• M4*30 Adjusting Screw x2
• T-Nut x4
• M4*5 Fasten Screw x4
• M4*18 Round Screw x1
• M5*10 Round Screw x1
• M5*20 Round Screw x16
• M5*20 Flat Screw x1
• Limiting Column Sleeve x1
• Paquet de materials x1
• Air Pump User Manual x1
• K1 Max User Manual x1
• Square Pad x4
• L-Allen Wrench x4 (2mm, 2.5mm, 3mm, 4mm)
• 8-10 Open Spanner x1
• Brides de cable x1
• Raspall de neteja x1

4. Especificacions

Cutting Performance (Power: 100%):

Image: Cutting depth capabilities for 20W, 40W, and 60W laser modules on materials like plywood, pine wood, MDF, and acrylic.

• 20W Module: Can cut 12mm Plywood (160mm/min), 15mm Pine Wood (460mm/min), 5mm MDF (15mm/min), 15mm Acrylic (15mm/min).
• 40W Module: Can cut 15mm Plywood (200mm/min), 20mm Pine Wood (130mm/min), 9mm MDF (150mm/min), 20mm Acrylic (30mm/min).
• 60W Module: Can cut 20mm Plywood (170mm/min), 40mm Pine Wood (50mm/min), 9mm MDF (400mm/min), 30mm Acrylic (30mm/min).

5. Guia de configuració

Follow these steps to assemble and set up your LASER TREE K1 MAX laser engraver:

1. Desempaquetar components: Carefully remove all items from the packaging and verify against the packing list.
2. Muntatge del marc: Connect the X-Axis Assembly, Y-Axis Assemblies, Front Frame, and Rear Frame according to the included K1 Max User Manual. Ensure all screws (M5*20 Round Screw, M4*5 Fasten Screw, etc.) are securely tightened.
3. Install Support Feet: Attach the three Support Feet to the base of the machine.
4. Install Y-Axis Timing Belts: Secure the Y-Axis Timing Belts as per the manual's instructions.
5. Mount Main Control Box: Attach the Main Control Box to the designated location on the frame.
6. Instal·leu el mòdul làser: Carefully mount the 60W Laser Module onto the X-axis assembly. Ensure it is properly seated and secured.
7. Connectar els cables: Connect the Main Cable, Power Adapter, and AC Cable. Route all cables neatly using the provided Cable Ties and the Cable Drag Chain.
8. Set up Air Assist: Connect the Air Assist Pump to the laser module and power supply as instructed in the Air Pump User Manual.
9. Place Honeycomb Panel: Position the Honeycomb Panel on your work surface, underneath the laser's working area, to protect your desktop and improve cutting results. Use the Desktop Protection Plate if needed.
10. Instal·lació de programari: Install the recommended laser control software (e.g., LightBurn, LaserGRBL) on your computer. Refer to the software's documentation for installation and basic usage.
11. Engegada inicial: Connect the power adapter and turn on the machine. Observe for any unusual noises or movements.

6. Instruccions de funcionament

6.1. Preparació del material

• Place your material on the Honeycomb Panel.
• Use the Red Cross Line Locating feature to accurately position your material.

6.2. Enfocament del làser

Achieving accurate focus is crucial for optimal engraving and cutting results. Refer to the K1 Max User Manual for detailed focusing procedures, typically involving adjusting the laser module height until the laser spot is at its smallest point on the material surface.

6.3. Adjusting Laser Power (20W/40W/60W)

The K1 MAX allows you to switch between 20W, 40W, and 60W power modes directly on the laser module. Select the appropriate power based on your material and desired outcome. Higher power is generally used for cutting thicker materials, while lower power is suitable for engraving and fine details.

Image: Visual representation of adjustable laser power settings and other features.

6.4. Using Air Assist

Connect and activate the Air Assist Pump when cutting or engraving materials that produce significant smoke or residue. Air assist helps to blow away debris, resulting in cleaner cuts and reduced charring.

6.5. Offline Engraving (TF Card)

Per realitzar un gravat fora de línia:

1. Prepara el teu disseny file using compatible software and save it to the TF card.
2. Insert the TF card into the Main Control Box.
3. Seleccioneu el vostre file using the machine's controls (refer to the manual for specific navigation).
4. Start the engraving process without needing a connected computer.

6.6. Engraving and Cutting Process

1. Carrega el teu disseny file into the laser control software or select it from the TF card.
2. Set the appropriate power, speed, and passes based on your material and desired effect. Refer to the cutting performance tables in the Specifications section for guidance.
3. Ensure all safety precautions are in place (goggles, ventilation).
4. Initiate the engraving/cutting job. Monitor the process closely.

Imatge: Visual examples of the K1 MAX's ability to cut various materials in a single pass.

7. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre gravador làser.

• Neteja la lent làser: Netegeu periòdicament la lent del làser amb un drap suau i sense borrissol i una solució netejadora de lents per mantenir la qualitat del feix.
• Clean Rails and Belts: Keep the guide rails and timing belts free from dust and debris. Lubricate the rails as recommended in the manual.
• Clean Honeycomb Panel: Remove accumulated debris and cut pieces from the honeycomb panel to ensure proper airflow and prevent fire hazards.
• Comproveu les connexions: Regularly inspect all electrical and mechanical connections for tightness and wear.
• Actualitzacions de programari: Keep your laser control software and firmware updated to the latest versions.

8. Solució De Problemes

Problemes comuns i solucions:

9. Consells d'usuari

• Rotary Attachment: The K1 MAX is designed for flat material processing. If you intend to engrave cylindrical objects like mugs, you may need to purchase a compatible rotary attachment separately. Check with the manufacturer or seller for recommended accessories.
• Prova de materials: Always perform small test engravings or cuts on scrap material before starting a large project to fine-tune your power and speed settings.
• Air Assist for Cleanliness: For cleaner cuts and to minimize charring, especially on wood and acrylic, always use the air assist feature.
• Organització de l'espai de treball: Keep your workspace tidy and free of clutter to prevent accidents and ensure smooth machine operation.

10. Garantia i Suport

Garantia:

All LASER TREE products come with a 1 any de garantia des de la data de compra, que cobreix defectes de fabricació i avaries en condicions d'ús normal. Conserveu el comprovant de compra per a reclamacions de garantia.

Atenció al client:

For any technical assistance, troubleshooting, or warranty inquiries, please contact the seller or manufacturer directly. All emails will typically be answered within 24 hours.

• Venedor: Laser Tree Retails Store
• Informació de contacte: Refer to your purchase platform or the official Laser Tree weblloc per obtenir dades de contacte.