1. Introducció
This manual provides instructions for the proper installation, operation, maintenance, and troubleshooting of the T2501 Electric Floor Carpet Brush Head, designed as a replacement part for Eufy HomeVac S11 Reach and Infinity Cordless Vacuum Cleaners. This brush head is engineered to effectively clean both hard floors and carpets, enhancing your vacuum's performance.
Figure 1: Eufy HomeVac S11 Brush Heads (White and Black options shown).
2. Compatibilitat
The T2501 Electric Floor Carpet Brush Head is specifically compatible with the following Eufy vacuum cleaner models:
- Eufy HomeVac S11 Reach
- Eufy HomeVac S11 Infinity
Please ensure your vacuum cleaner model matches one of the listed compatible models before installation.
Figure 2: T2501 Brush Heads, available in white and black, compatible with Eufy S11 models.
3. Configuració i instal·lació
Follow these steps to install the T2501 Electric Floor Carpet Brush Head onto your Eufy HomeVac S11 vacuum cleaner:
- Apagar: Ensure your Eufy HomeVac S11 vacuum cleaner is turned off and unplugged from any charging source before beginning installation.
- Remove Old Brush Head (if applicable): Locate the release button or latch on your existing brush head. Press or slide it to detach the old brush head from the vacuum cleaner wand.
- Col·loqueu un capçal de raspall nou: Align the T2501 brush head with the connection point on the vacuum cleaner wand. Push firmly until you hear a click, indicating it is securely locked in place. Gently tug on the brush head to confirm it is properly attached.
- Verifica la connexió: Once attached, ensure there are no gaps and the brush head is stable.
Figura 3: Frontal view of the T2501 brush heads in white and black, ready for attachment.
4. Instruccions de funcionament
Once the T2501 Electric Floor Carpet Brush Head is securely installed, operate your Eufy HomeVac S11 vacuum cleaner as usual. The electric brush head will automatically engage to provide enhanced cleaning performance on various surfaces.
- Tipus de sòl: This brush head is designed for effective cleaning on both hard floors (e.g., wood, tile, laminate) and carpets.
- Maniobrabilitat: The design allows for easy maneuverability around furniture and obstacles.
- Succió: The electric brush assists in lifting dirt and debris, complementing the vacuum's suction power.
Figure 4: Eufy S11 vacuum cleaner in operation with the brush head, demonstrating effective debris collection.
5. Manteniment
Regular maintenance of your brush head ensures optimal performance and extends its lifespan. Perform these steps periodically:
- Apagar: Always turn off and unplug the vacuum cleaner before performing any maintenance.
- Remove Brush Head: Detach the brush head from the vacuum wand.
- Raspall de rodets net: Locate the roller brush on the underside of the head. Use scissors or a brush cleaning tool to carefully cut and remove any tangled hair, threads, or debris. Ensure the brush can spin freely.
- Esborrar: Utilitzeu un sec o lleugerament damp cloth to wipe down the exterior of the brush head, removing dust and dirt. Do not immerse the brush head in water.
- Comproveu si hi ha danys: Inspect the bristles and the brush head casing for any signs of wear, cracks, or damage. Replace if necessary.
- Torna a adjuntar: Once clean, reattach the brush head to the vacuum cleaner wand.
Figura 5: Part inferior view of the brush heads, highlighting the roller brush for cleaning and maintenance.
6. Solució De Problemes
If you encounter issues with your T2501 Electric Floor Carpet Brush Head, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El capçal del raspall no gira | Tangled hair/debris in roller brush; Obstruction in brush motor; Loose connection. | Clean the roller brush thoroughly (refer to Maintenance section); Check for any visible obstructions; Ensure the brush head is securely attached to the vacuum wand. |
| Reduced suction/cleaning performance | Clogged roller brush; Vacuum filter needs cleaning/replacement; Vacuum dustbin is full. | Clean the roller brush; Clean or replace your vacuum's filters; Empty the vacuum's dustbin. |
| Unusual noise from brush head | Debris caught in brush; Worn bearings; Damaged brush. | Remove any debris from the roller brush; If noise persists and brush is clean, contact support as internal components may be damaged. |
7. Especificacions
| Característica | Detall |
|---|---|
| Número de model | T2501 |
| Tipus | Vacuum Cleaner Part (Electric Floor Carpet Brush Head) |
| Compatibilitat | Eufy HomeVac S11 Reach, Eufy HomeVac S11 Infinity |
| Material | Silicone, Metal, Plastic |
| Dimensions (aprox.) | Length: 25.5 cm, Height: 27.5 cm |
| Pes (aprox.) | 620 g |
| Colors disponibles | Blanc, Negre |
Figure 6: Dimensions and weight of the T2501 brush head.
8. Consells d'usuari
- Neteja regular: To maintain optimal suction and brush rotation, make it a habit to check and clean the roller brush after every few uses, especially if you have pets or long hair in the household.
- Comprovar la compatibilitat: Always double-check that the brush head is compatible with your specific Eufy S11 model (Reach or Infinity) to ensure proper fit and function.
9. Garantia i Suport
For warranty information, please refer to the terms and conditions provided by your original seller or the manufacturer, Eufy. If you experience any issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact the seller or Eufy customer support directly.
