1. Introducció
The Waveshare AW-CB375NF is a high-performance dual-band wireless network card designed to provide reliable and fast wireless connectivity. This module supports both 2.4GHz and 5GHz frequency bands, offering Wi-Fi 5 (802.11ac) capabilities with speeds up to 867Mbps on the 5GHz band and 300Mbps on the 2.4GHz band. It also integrates Bluetooth 5.0, ensuring compatibility with a wide range of Bluetooth devices. This manual provides essential information for the installation, operation, and maintenance of your AW-CB375NF wireless network card.
2. Contingut del paquet
Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:
- 1 x AW-CB375NF Wireless Network Card Module
- 2 x antenes
- 2 x Adapter Cables (for antenna connection)
3. Especificacions
| Característica | Descripció |
|---|---|
| Model | AW-CB375NF |
| Estàndard sense fils | IEEE 802.11ac/m (Wi-Fi 5) |
| Bandes de freqüència | 2.4GHz / 5GHz (Dual Band) |
| 2.4GHz Data Rate | Fins a 300 Mbps |
| 5GHz Data Rate | Fins a 867 Mbps |
| Estàndard Bluetooth | Bluetooth 5.0 (compatible with 2.1+EDR) |
| Interfície | NGFF (M.2 A/E Key) |
| Configuració de l'antena | MIMO OFDM (2T2R - Two Transmission, Two Reception Paths) |
| Chipset | RTL8822CE-CG |
| Sistema operatiu compatible | Linux, Windows 10/11 |
4. Guia d'instal·lació
Follow these steps to install your Waveshare AW-CB375NF wireless network card:
- Prepareu el vostre sistema: Power off your computer and disconnect it from the power source. Open the computer case to access the motherboard.
- Localitza la ranura M.2: Identify an available M.2 A/E Key slot on your motherboard. Refer to your motherboard's manual if you are unsure.
- Install the Network Card: Gently insert the AW-CB375NF module into the M.2 slot at a slight angle. Once seated, push down the module and secure it with the screw provided with your motherboard (not included with the network card).
- Connect Adapter Cables: Attach the two adapter cables to the "Aux" and "Main" connectors on the AW-CB375NF module. Ensure a firm connection.
Figure 3: Network card with adapter cables and antennas connected. - Instal·lació d'antenes: Route the other end of the adapter cables to the desired location on your computer case (e.g., a PCI bracket with antenna holes). Screw the two external antennas onto the adapter cable connectors. Position the antennas for optimal signal reception.
Figure 4: Adapter cables for antenna connection. - Tanqueu la carcassa i engegueu-la: Tanqueu la carcassa de l'ordinador, torneu a connectar l'alimentació i engegueu el sistema.
5. Instal·lació del controlador
For optimal performance and full functionality, it is recommended to install the latest drivers for the RTL8822CE-CG chipset. While Windows 10/11 may automatically install generic drivers, specific drivers often provide better stability and features.
- Windows: For Windows 10/11, the operating system may automatically detect and install the necessary drivers. If not, or for updated drivers, visit the official Realtek website or your motherboard manufacturer's support page and search for drivers compatible with the RTL8822CE-CG chipset.
- Linux: For Linux distributions, driver installation may vary. Many modern distributions include support for the RTL8822CE-CG chipset out-of-the-box. If you encounter issues, consult your distribution's documentation or community forums for specific driver installation instructions.
6. Funcionament
Once the network card is installed and drivers are in place, your system will recognize it as a wireless adapter and Bluetooth device.
6.1. Connecting to Wi-Fi Networks
- Navigate to your operating system's network settings (e.g., Wi-Fi icon in the taskbar for Windows, Network Manager for Linux).
- Seleccioneu la xarxa Wi-Fi desitjada de la llista de xarxes disponibles.
- Introduïu la contrasenya de xarxa (si cal) i feu clic a "Connecta".
- Your system should now be connected to the Wi-Fi network.
6.2. Ús del Bluetooth
- Ensure Bluetooth is enabled in your operating system's settings.
- Poseu el vostre dispositiu Bluetooth (per exemple, auriculars, ratolí) en mode d'emparellament.
- In your system's Bluetooth settings, search for new devices.
- Seleccioneu el dispositiu de la llista i seguiu les instruccions que apareixen a la pantalla per completar el procés d'emparellament.
7. Solució De Problemes
- No s'ha detectat cap Wi-Fi ni Bluetooth:
- Ensure the card is correctly seated in the M.2 slot.
- Verify that the adapter cables and antennas are securely connected.
- Check Device Manager (Windows) or network utilities (Linux) to see if the device is recognized and drivers are installed. Reinstall drivers if necessary.
- Ensure Wi-Fi and Bluetooth are enabled in your operating system settings.
- Senyal Wi-Fi deficient o velocitats lentes:
- Adjust the position of the external antennas for better reception.
- Ensure your router is within range and operating on an optimal channel.
- Comproveu si hi ha interferències d'altres dispositius electrònics.
- Update your network card drivers to the latest version.
- Problemes d'emparellament per Bluetooth:
- Ensure the Bluetooth device is in pairing mode and fully charged.
- Remove any previous pairings of the device from your system and try again.
- Restart your computer and the Bluetooth device.
8. Manteniment
The Waveshare AW-CB375NF wireless network card requires minimal maintenance. To ensure longevity and optimal performance:
- Keep your computer's interior clean and free of dust to prevent overheating of components, including the network card.
- Assegureu-vos que hi hagi un flux d'aire adequat dins de la caixa de l'ordinador.
- Regularly update your operating system and network card drivers.
9. Garantia i Suport
For warranty information and technical support, please refer to the Waveshare official weblloc web o poseu-vos en contacte amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
