Introducció
Gràcies per la compraasing the ABKO P360 Poseidon ARGB 3-Row CPU Water Cooler. This All-in-One (AIO) liquid cooling solution is designed to provide efficient and quiet cooling for your CPU, featuring vibrant Addressable RGB (ARGB) lighting. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your cooler.
Producte acabatview
The ABKO P360 Poseidon ARGB cooler combines a high-performance pump, a 360mm radiator, and three 120mm ARGB fans to deliver superior thermal management. Its universal compatibility ensures support for a wide range of Intel and AMD sockets.
Característiques principals:
- 3-Row Radiator: Efficient heat dissipation with a large surface area.
- Il·luminació ARGB: Customizable lighting effects on fans and pump for aesthetic appeal.
- High Performance Pump: Ensures strong coolant circulation for effective cooling.
- Compatibilitat universal: Supports Intel LGA1700/1200/115X/2011/2066 and AMD AM5/AM4/AM3+/AM3/FM2+/FM2 sockets.
- Funcionament de baix soroll: Dissenyat per a un rendiment silenciós.
- Durable FEP Tubing: Flexible and robust tubing for long-term reliability.
- Fàcil instal·lació: User-friendly design for straightforward setup.
Especificacions
| Component | Especificació |
|---|---|
| Número de model | 120X5_ARGB |
| Tipus | CPU Block (AIO Liquid Cooler) |
| Material | Copper (Water Block), Aluminum (Radiator) |
| Suport RGB | A-RGB |
| Dimensions del radiador | 394 x 120 x 27 mm |
| Dimensions de la bomba | 80 x 80 x 50 mm |
| Pump Bearing | Ceràmica |
| Velocitat de la bomba | 2500 RPM |
| Potència de la bomba | 1.5 W |
| Bomba Voltage / Actual | 12 V / 0.12 A |
| Mida del ventilador | 120 x 120 x 25 mm (x3) |
| Velocitat del ventilador | 800-1800 RPM |
| Flux d'aire del ventilador | 72 CFM |
| Pressió estàtica del ventilador | 3.1 mm H2O |
| Nivell de soroll del ventilador | 30 dBA (màx.) |
| Material del tub | FEP |
| Longitud de la tuberia | 400 mm |
| Compatibilitat del sòcol | Intel: LGA1700/1200/115X/2011/2066 AMD: AM5/AM4/AM3+/AM3/FM2+/FM2 |
Configuració i instal·lació
Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket information.
Passos generals d'instal·lació:
- Preparació del sòcol de la CPU:
- For Intel LGA1700/1200/115X: Install the appropriate backplate behind the motherboard. Secure it with the correct standoffs.
- For AMD AM5/AM4: Utilize the original AMD backplate that comes with your motherboard. Install the AMD-specific standoffs.
- Aplicar pasta tèrmica: Apply a small, pea-sized amount of thermal paste to the center of your CPU's Integrated Heat Spreader (IHS).
- Mount Water Block/Pump: Carefully place the water block onto the CPU, aligning the mounting holes with the standoffs. Secure it with the provided thumb screws or nuts, tightening in a diagonal pattern until snug.
- Install Fans on Radiator: Attach the three 120mm ARGB fans to the radiator using the long screws provided. Ensure the fan airflow direction is appropriate for your case (typically blowing air through the radiator and out of the case, or into the case for intake).
- Muntar el radiador: Install the radiator assembly into your PC case. Common mounting locations include the top or front of the case, depending on available space and case design. Secure it with the appropriate screws.
- Connectar els cables: Refer to the wiring diagram below for proper connections.
Diagrama de cablejat:
Cable Connections Summary:
- Bomba: Connect the 3-pin pump cable to your motherboard's CPU_FAN or AIO_PUMP header.
- Fans: Connect each 4-pin PWM fan cable to an available fan header on your motherboard or a fan hub.
- Il·luminació ARGB: Connect the 3-pin ARGB cables from the pump and fans to the included ARGB controller. The controller then connects to a SATA power connector from your power supply and optionally to a 5V 3-pin ARGB header on your motherboard for software control.
Instruccions de funcionament
Once installed and powered on, the ABKO P360 Poseidon ARGB cooler will automatically begin cooling your CPU. Fan speeds are typically controlled by your motherboard's PWM settings, which can be adjusted in the BIOS/UEFI or via motherboard software.
Control d'il·luminació ARGB:
The ARGB lighting can be controlled in two ways:
- Via Included ARGB Controller: If you connected the ARGB cables to the included controller, use the physical buttons on the controller to cycle through lighting modes, adjust speed, and change colors.
- Mitjançant el programari de la placa base: If you connected the ARGB controller (or directly the ARGB cables) to a compatible 5V 3-pin ARGB header on your motherboard, you can use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to synchronize and customize the lighting effects.
Manteniment
Un manteniment regular ajuda a garantir la longevitat i el rendiment òptim del vostre refrigerador de líquid.
- Neteja de pols: Periodically clean the radiator fins and fan blades to prevent dust buildup, which can impede airflow and cooling performance. Use compressed air or a soft brush.
- Inspecció de tubs: Occasionally inspect the FEP tubing for any signs of kinks, leaks, or damage.
- Soroll del ventilador: If fans become excessively noisy, check for dust accumulation or loose mounting screws.
- Sense reompliment de refrigerant: This is a closed-loop AIO system and does not require coolant refills. Do not attempt to open the cooler as it will void the warranty and may cause damage.
Resolució de problemes
If you encounter issues with your ABKO P360 Poseidon ARGB cooler, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| No power to pump/fans/ARGB | Loose or incorrect power connections. | Check all power cables (SATA for ARGB controller, 3-pin for pump, 4-pin for fans) are securely connected to the PSU and motherboard. |
| Temperatures altes de la CPU | Improper water block mounting, insufficient thermal paste, dust buildup on radiator, pump failure. | Ensure water block is securely mounted and thermal paste is applied correctly. Clean radiator fins. Check if pump is running (listen for a faint hum or check BIOS/software for RPM). |
| Fans not spinning or ARGB not lighting up | Incorrect fan/ARGB connections, faulty fan/ARGB controller, software conflict. | Verify fan PWM and ARGB connections. Test with the included ARGB controller if using motherboard software. Check motherboard BIOS/software settings for fan control and RGB. |
| Soroll inusual del refrigerador | Air bubbles in the loop, loose fan screws, pump cavitation. | Orient the radiator higher than the pump to allow air bubbles to settle in the radiator. Ensure all fan screws are tight. If noise persists and performance is affected, contact support. |
Consells per a l'usuari
- Col·locació del radiador: For optimal cooling, consider mounting the radiator as an exhaust at the top of your case to remove hot air. If mounted at the front, ensure it's configured as an intake to bring in cool air.
- Gestió de cables: Plan your cable routing before installation to ensure a clean build and unobstructed airflow.
- Aplicació de pasta tèrmica: While a pea-sized dot is common, some users prefer the 'X' or 'line' method. Ensure even spread for best contact.
- Configuració de la BIOS/UEFI: Configure your motherboard's fan curves in the BIOS/UEFI to balance cooling performance and noise levels according to your preference.
- ARGB Synchronization: If using motherboard software for ARGB control, ensure all necessary drivers and software are installed and up-to-date.
Garantia i Suport
ABKO products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official ABKO weblloc web o poseu-vos en contacte amb el vostre distribuïdor. Conserveu el comprovant de compra per a reclamacions de garantia.
