Makerbase MKS DLC32 MAX Motherboard User Manual

1. Introducció

The MKS DLC32 MAX laser engraving control board, meticulously developed by Makerbase (MKS), is a high-performance, highly expandable, and intelligently controlled engraving solution. Powered by the ESP32-S3 series chip, it supports both CNC and laser engraving, including CNC A-axis control, delivering up to 60W laser power and speeds of up to 30,000mm/min to meet the demands of efficient creation.

It is compatible with the TMC2209 ultra-quiet driver and TB67S109 high-current driver module, offering robust expandability for seamless connection to external servo motors and spindles. Equipped with intelligent safety features such as lid protection and flame detection, it ensures a secure creative experience. Without the need for prolonged computer connections, it supports mobile app and Web LAN remote control for greater flexibility and convenience. Whether for laser engraving or CNC applications, the MKS DLC32 MAX is the ideal choice to unlock boundless creativity!

2. Informació de seguretat

Si us plau, llegiu i enteneu tots els avisos de seguretat abans de fer servir el dispositiu.

2.1 Warnings & Safety Information

• Perill d'incendi i cremada: High temperatures generated during processing may ignite the workpiece, smoke, or surrounding materials. The processing area must be kept clear of flammable substances and equipped with fire extinguishing equipment. After processing, the workpiece and machine components (e.g., spindle, laser head) may remain hot for an extended period; verify full cooling before handling.
• Mechanical Injury Hazard: High-speed rotating spindles, moving gantries, belts, and lead screws pose serious risks of crushing, cutting, or entanglement injuries. Before performing any installation, commissioning, cleaning, or maintenance operation, disconnect the machine from the main power supply.
• Risc elèctric: Alt voltage circuits are present internally. Unauthorized personnel must not open the electrical control cabinet. All electrical connections must comply with local regulations and be performed by qualified electricians.
• Hazardous Substances and Fumes: Processing certain materials (e.g., plastics, composites, coated metals) may generate toxic, carcinogenic, or irritating fumes and dust. Use only in environments equipped with an effective Local Exhaust Ventilation (LEV) system.

3. Producte acabatview

The MKS DLC32 MAX offers advanced features for enhanced performance and safety.

• High-Performance Core: Equipped with the ESP32-S3 chip, supporting CNC and laser engraving up to 60W laser power and speeds of 30,000mm/min.
• Powerful Expandability: Rich in driver interfaces, supporting plug-in and external drivers for up to 4 axes and CNC A-axis.
• Intelligent Safety Assurance: Features lid protection and flame detection for a secure creative experience.
• Control flexible: Supports mobile app and Web LAN remote control, eliminating the need for prolonged computer connections.

Dual-Fan Enclosure Design

The newly upgraded enclosure design incorporates a dual-fan system, significantly enhancing heat dissipation performance. This efficient cooling ensures the mainboard operates at optimal performance, delivering a smoother and more reliable user experience.

4. Especificacions

Key technical specifications for the MKS DLC32 MAX Motherboard:

Dimensions físiques

The motherboard has the following approximate dimensions:

• Longitud: 20 cm
• Amplada: 10 cm
• Alçada: 3 cm
• Pes: 0.36 kg

5. Instal·lació i configuració

Proper installation is crucial for the safe and effective operation of your MKS DLC32 MAX motherboard.

5.1 Product Identification and Compatibility

This accessory is designed for use with TWOTREES-branded machines. Ensure compatibility with your specific equipment model before proceeding with installation.

5.2 Mètode d'instal·lació

This accessory must be replaced exclusively by personnel trained by the equipment manufacturer or otherwise qualified professionals, strictly following the original manufacturer's "User Manual / Maintenance Manual". Incorrect installation may result in equipment damage, performance degradation, or safety hazards.

1. Preparació: Confirm compatibility of the accessory model. Ensure the workspace is clean and well-ventilated.
2. Desconnexió d'alimentació: Shut down the host machine and unplug it from the main power source. Wait until all components—especially the laser source and spindle motor—are fully cooled.
3. Removal of Old Component: Refer to the original manufacturer's manual; record wiring connections and mechanical positioning, then carefully remove the component to be replaced.
4. Installation of New Component: Install the new accessory in reverse order. Ensure all mechanical connections are securely tightened and all electrical connections are correct, properly polarized, and firmly secured.

5.3 Mainboard Interfaces

Familiarize yourself with the various interfaces on the motherboard for correct connections.

5.4 Driver Current Measurement and Microstepping Settings

Properly configure your stepper motor drivers according to their specifications. The following image provides guidance for common driver types.

The DIP switches in the driver slots on the motherboard are set to OFF when flipped downward (toward the numbered side) and to ON when flipped upward.

6. Procediments de funcionament

6.1 Summary of Correct Operating Procedures

1. Calibració: After installation, recalibrate the relevant systems (e.g., laser power, tool length, engraving area) as specified in the original manufacturer's manual.
2. Prova: Conduct a low-power/low-speed no-load test under safe conditions to verify smooth operation, absence of abnormal noise, and absence of alarms before resuming normal use.

6.2 Mètodes de control

The MKS DLC32 MAX supports multiple operation methods for versatile control:

• Web-control basat
• Mobile remote control via dedicated app
• Self-developed convenient touchscreen operation

7. Manteniment

7.1 Condicions ambientals

To ensure optimal performance and longevity of the motherboard, adhere to the following environmental guidelines:

• Només per a ús interior.
• Temperatura de funcionament: 0 °C a 40 °C.
• Temperatura d'emmagatzematge: -10 °C a 50 °C.
• Classificació de protecció d’entrada: IP20 (dust-protected, no water protection).
• No utilitzar en damp, dusty, corrosive-gas, or explosive environments.

7.2 Atenció general

• Keep the motherboard clean and free from dust and debris.
• Ensure proper ventilation, especially around the dual-fan enclosure, to prevent overheating.
• Regularly check all connections for tightness and proper seating.

8. Solució De Problemes

This section provides general troubleshooting tips. For specific issues, refer to the detailed documentation provided by the manufacturer or seek professional assistance.

• Sense energia: Check power input (12V-24V 10A) and all power connections. Ensure the power fuse is intact.
• Motor que no es mou: Verify driver current settings and microstepping configurations (refer to Figure 8). Check motor wiring and ensure drivers are correctly installed.
• Connection Issues (WiFi/USB): Ensure correct drivers are installed on your PC. For WiFi, check network connectivity and ensure the board is properly configured for LAN or app control.
• Engraving/Cutting Inaccuracies: Recalibrate the system (laser power, tool length, engraving area) as per the manufacturer's guidelines. Check for loose mechanical components.
• Sobreescalfament: Ensure the dual-fan enclosure is clear of obstructions and fans are functioning correctly. Operate within recommended environmental temperatures.

9. Consells d'usuari

Tot i que no hi ha cap usuari específicviews or Q&A were provided for this manual, general tips for using such a control board include:

• Always start with low power and speed settings when testing new materials or designs to prevent damage.
• Regularly back up your configuration files and project settings.
• Keep the firmware updated to benefit from the latest features and bug fixes.
• Ensure your workspace is well-lit and free of clutter to enhance safety and precision.

10. Informació del fabricant

• Marca: DOS ARBRES
• Nom del fabricant: Shenzhen Two Trees Technology Co., Ltd.
• Adreça: 402, Building 11, No. 9, Qilin Road, Nankeng Community, Sakata Street, Longgang District, Shenzhen City, Guangdong Province, Mainland China
• EU Responsible Person Information:
  • Nom: AMZ ECREP SL
  • Adreça: Calle Gran Via 49, 7 Deb. Spain

For further information or support, please contact the manufacturer directly.

11. Garantia i Suport

For warranty claims and technical support, please contact the seller or manufacturer directly using the information provided above. Keep your proof of purchase for any warranty-related inquiries.

Podeu descarregar un manual d'usuari en format PDF: Manual d'usuari (PDF).