1. Introducció
This manual provides essential information for the safe and effective operation of your SHEHDS LED Spider Beam Mini 9x10W RGBW 4in1 Moving Head Lighting fixture. Please read this manual thoroughly before installation and use, and keep it for future reference.
Figure 1: SHEHDS LED Spider Beam Mini 9x10W RGBW 4in1 Moving Head Lighting
2. Precaucions de seguretat
- Assegureu-vos que l'entrada voltage matches the specified range (AC100-240V, 50-60Hz) to prevent damage.
- Always connect the fixture to a grounded power outlet.
- No obriu la c.asing; no hi ha peces a l'interior que l'usuari pugui reparar. Demaneu totes les tasques de manteniment a personal qualificat.
- Avoid direct eye exposure to the light source, as it can cause eye injury.
- Keep the fixture away from water, moisture, and excessive heat.
- Assegureu-vos una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
- Use appropriate safety cables when suspending the fixture.
3. Contingut del paquet
En obrir el paquet, comproveu que hi hagi tots els elements i que estiguin en bon estat:
- 1x Mini LED Beam Spider Light
- 1x cable d'alimentació
- 1x Signal Line (DMX cable)
- 1 x manual d'instruccions
- 1x Suspension Accessories (bracket)
- 2x cargols
Figure 2: Included accessories and packaging
4. Configuració
4.1 Muntatge
The fixture can be mounted in various positions (e.g., truss, floor) using the provided suspension accessories. Ensure the mounting surface or truss is capable of supporting the fixture's weight (6KG) and that a safety cable is always used.
4.2 Connexions
Refer to the rear panel diagram for connection points:
Figure 3: Rear panel connections and control buttons
- Connexió d'alimentació: Connect the power cord to the 'POWER IN' socket. Multiple devices can be daisy-chained using the 'POWER OUT' socket to connect to the 'POWER IN' of the next fixture. The power cable includes a fuse for protection.
- Connexió DMX: Use the provided signal line (DMX cable) to connect your DMX controller to the 'DMX IN' socket. For multiple fixtures, connect the 'DMX OUT' of the first fixture to the 'DMX IN' of the next, and so on.
5. Instruccions de funcionament
5.1 Tauler de control
The fixture features a digital display and control buttons ('MENU', 'UP', 'DOWN', 'ENTER') on the rear panel for mode selection and parameter adjustment.
5.2 Control DMX
The fixture supports 16 or 48 DMX channels. Connect a DMX controller to access advanced lighting effects and precise control over individual parameters such as dimming, function, speed, and RGBW color mixing.
Figure 4: DMX Channel Value Panel and Control Sliders
5.3 Automatic and Sound-Activated Modes
The fixture includes built-in automatic programs and a sound-activated mode. These can be selected via the control panel for standalone operation without a DMX controller.
5.4 Lighting Effects Demonstration
The video below demonstrates various lighting effects achievable with the SHEHDS LED Spider Beam Mini.
Video 1: Demonstration of various lighting patterns and color changes.
6. Manteniment
- Neteja: Regularly clean the lenses and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Inspecció: Reviseu periòdicament tots els cables, connexions i elements de muntatge per detectar signes de desgast o danys. Substituïu immediatament qualsevol component danyat.
- Emmagatzematge: Quan no l'utilitzeu, guardeu l'aparell en un lloc sec i sense pols, preferiblement en el seu embalatge original o en una funda protectora.
- Substitució de fusibles: The power input includes a fuse. If the unit does not power on, check and replace the fuse if necessary. Ensure to use a fuse of the correct rating.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'aparell no s'encén | No power supply; Blown fuse; Faulty power cable | Check power connection; Replace fuse; Test/replace power cable |
| Sense sortida de llum | Fixture in blackout mode; DMX signal issue; Internal fault | Check DMX settings/mode; Verify DMX cable and controller; Contact support |
| Incorrect DMX control | Incorrect DMX address; Incorrect DMX mode; Faulty DMX cable | Set correct DMX address; Select correct DMX channel mode (16/48); Check DMX cable connections |
| Sobreescalfament de l'aparell | Poor ventilation; Ambient temperature too high | Ensure adequate airflow around the unit; Operate in a cooler environment |
8. Especificacions
| Característica | Especificació |
|---|---|
| Entrada Voltage | AC100-240V, 50-60Hz |
| Potència total | 90W |
| Font LED | 9x10W RGBW 4in1 LEDs (Red, Green, Blue, White and mix Color) |
| Canals de control DMX | Canals DMX 16/48 |
| Mida del producte | 31 cm x 29 cm x 15 cm |
| Pes | 6 kg |
| Flux lluminós | 2000-82000 |
| Font d'alimentació | AC |
| Mètode d'instal·lació | Autònom |
| Certificació | CE, EAC, FCC, RoHS, UL, WEEE |
9. Consells d'usuari
- For optimal beam effects, use the fixture in environments with some atmospheric haze or fog.
- When daisy-chaining power, ensure the total current draw does not exceed the circuit's capacity.
- Experiment with both 16-channel and 48-channel DMX modes to find the best balance between control complexity and desired effects for your setup.
- Regularly check the fan vents for dust accumulation to maintain efficient cooling and prolong LED lifespan.
10. Garantia i Suport
This product comes with a 1-year warranty from the date of purchase. For technical support, service, or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
