1. Introducció
The Skydroid T10 is an advanced 10-channel remote control system designed for a wide range of remote-controlled vehicles, including UAVs, helicopters, fixed-wing aircraft, quadcopters, cars, and boats. This system integrates digital video transmission, data transmission, and control functionalities into a single unit, offering reliable communication and extensive control capabilities. It features FHSS (Frequency Hopping Spread Spectrum) technology for robust signal integrity and supports parameter adjustments via a dedicated mobile application.
2. Producte acabatview
2.1. Característiques clau
- Dual antenna and dual RF module with integrated control algorithms for reliable communication.
- Utilizes FHSS (Frequency Hopping Spread Spectrum) technology for stable operation.
- Integrated digital video transmission with a range of up to 10KM.
- Integrated data transmission with a range of up to 20KM.
- Parameter adjustments via a mobile application (APP) with touch panel control.
- Connectivity via Bluetooth or USB, supporting S.BUS, PPM, PWM serial ports, and external devices.
- APP allows switching operation models, adjusting data (forward/reverse, rudder volume), channel binding, runaway protection, SBUS/PPM output, and digital baud rate.
- Supports parameter saving and loading functions.
- Optimized compatibility with Pixhawk systems via the "Tower" APP, including map view for waypoint selection and route planning.
- Also supports Tower, QGC, JIYI, TOPXGUN, and BOYING APPs.
- Powered by two 18650 batteries (sold separately), providing over 20 hours of endurance with 20dBm transmission frequency.
- High integrated datalink with video, data, and telemetry in one ultra-small unit with folding brackets.
- Designed for UAV, Helicopter, Fixed Wing, Multi Rotor, or Boat operations.
2.2. Components
The Skydroid T10 system typically includes the following main components:
- T10 Transmitter: The main remote control unit.
- Receptor R10: Connects to your flight controller or vehicle.
- Mini Camera: For video transmission.
- Necessary cables for connection.
3. Especificacions
3.1. T10 Transmitter
| Paràmetre | Valor |
|---|---|
| Nombre de canals | 10 canals |
| Freqüència | 2.400-2.483 GHz |
| Voltage | 4.2 V |
| Corrent de treball | 100 mA |
| Modulació | Nou FHSS |
| Pes | 525 g |
| Actualització del firmware | APP en línia |
| Dimensions | 160 * 150 * 50 mm |
| Durada | 20 hores |
| Capacitat de la bateria | 4000mA (requires 2x 18650 batteries, sold separately) |
| Port de càrrega | MICRO-USB |
| Aplicacions | Helicopter, Fixed wing, Quadcopter, Car, Boat |
3.2. R10 Receiver
| Paràmetre | Valor |
|---|---|
| Model | R10 |
| Nombre de canals | 10 canals |
| Voltage | 4.5-5.5V |
| Corrent de treball | 100 mA |
| Dimensions | 50*31*12MM |
| Pes | 20 g |
3.3. Mini Camera
| Paràmetre | Valor |
|---|---|
| Model | MINIDCAM |
| Mida | 30x29x26 mm |
| Corrent de treball | 180 mA |
| Pes | 15.6 g |
4. Instruccions de configuració
4.1. R10 Mini Receiver Connection and Pairing
- Connect Camera: Connect the camera cable to the mini camera.
- Power On Flight Control: Power on your flight control system (e.g., drone, aircraft).
- Initiate Receiver Pairing: Press the counter button on the R10 receiver. The green light on the receiver will flash quickly, indicating it is in frequency pairing mode.
- Enceneu el comandament a distància: Turn on the T10 remote control.
- Confirmeu l'aparellament: After a short period, the receiver's green light will become solid, indicating successful pairing. A "drip" sound may also confirm the connection.
- Connect Data Line: Plug the remote control into the data line (e.g., to a smartphone or tablet running the APP).
- Display Image and Data: The image from the camera should now be displayed on your connected device. After connecting to the ground station APP, data transmission will be active.
Ensure all connections are secure before powering on any components to prevent damage.
5. Instruccions de funcionament
5.1. Funcionament bàsic
- Encès/apagat: Use the designated power button on the T10 transmitter to turn the unit on or off.
- Control del joystick: The two joysticks provide primary control over your vehicle's movement and direction. Familiarize yourself with their functions (e.g., throttle, yaw, pitch, roll) as configured for your specific application.
- Funcions de commutació: The T10 features various switches and buttons. Refer to your vehicle's flight controller manual and the Skydroid APP for detailed configuration of these controls.
5.2. APP Integration and Parameter Adjustment
The Skydroid T10 system is designed for seamless integration with a mobile application (APP) for advanced settings and real-time monitoring.
- Descarrega l’APP: Download the appropriate Skydroid APP (or compatible APPs like Tower, QGC) from your device's app store.
- Connect via Bluetooth/USB: Connect your mobile device to the T10 transmitter via Bluetooth or a USB data cable.
- Configuració d'accés: Within the APP, you can:
- Switch operation models (e.g., Mode 1, Mode 2).
- Adjust control parameters such as forward/reverse, rudder volume, and channel binding.
- Set runaway protection values.
- Configure SBUS, PPM output, and digital baud rate.
- Utilize map view for waypoint selection and route planning (with compatible flight controllers).
- Save/Load Parameters: The APP allows you to save custom parameter configurations and load them as needed.
5.3. Video and Data Transmission
Once the system is set up and connected to the APP, you will receive real-time video feed from the mini camera and telemetry data from your vehicle.
- Visualització de vídeo: The live video feed will appear on your connected mobile device.
- Dades de telemetria: Monitor critical flight data such as battery voltage, GPS coordinates, altitude, and speed through the APP's ground station interface.
6. Manteniment
- Neteja: Regularly clean the exterior of the T10 transmitter and R10 receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
- Cura de la bateria:
- Ensure the 18650 batteries are correctly installed and charged.
- Charge the batteries using the provided MICRO-USB port or a compatible charger.
- Do not overcharge or deeply discharge the batteries.
- Store the transmitter in a cool, dry place when not in use, especially for extended periods.
- Actualitzacions de firmware: Periodically check for firmware updates via the Skydroid APP to ensure optimal performance and access to new features. Follow the in-app instructions for updating.
- Emmagatzematge: Store the remote control system in a protective case to prevent physical damage, especially to joysticks and antennas.
- Condicions ambientals: Avoid exposing the system to extreme temperatures, humidity, or direct sunlight for prolonged periods.
7. Solució De Problemes
- Sense energia:
- Ensure 18650 batteries are correctly installed and charged.
- Check the MICRO-USB charging cable and power source if charging.
- No Signal/Lost Connection:
- Verify that the R10 receiver is correctly paired with the T10 transmitter (green light solid). If not, repeat the pairing process (Section 4.1).
- Ensure antennas on both the transmitter and receiver are properly oriented and undamaged.
- Check for obstructions or excessive distance between the transmitter and receiver.
- Minimitzar les interferències d'altres dispositius de 2.4 GHz.
- Sense canal de vídeo:
- Confirm the mini camera is securely connected to the R10 receiver.
- Ensure your mobile device is properly connected to the T10 transmitter via Bluetooth or USB and the APP is running.
- Check camera settings within the APP.
- Problemes de connectivitat de l'aplicació:
- Ensure Bluetooth is enabled on your mobile device and the T10 transmitter.
- Try restarting both the APP and the T10 transmitter.
- Check for APP updates.
- Resposta de control incorrecta:
- Verify that the control mode (e.g., Mode 1/2) is correctly set in the APP.
- Check channel assignments and calibration within the APP.
- Ensure your flight controller is correctly configured to receive signals from the R10 receiver.
8. Consells d'usuari
- Always perform a range check before operating your vehicle, especially in new environments.
- Familiarize yourself with the APP interface and its various settings before flight.
- Keep the firmware of your T10 transmitter and R10 receiver updated for the best performance and compatibility.
- Consider using a neck strap for the transmitter during extended use to reduce fatigue and improve control stability.
- Always ensure your vehicle's battery and the T10 transmitter's batteries are fully charged before use.
9. Garantia i Suport
For warranty information, technical support, or service inquiries, please refer to the official Skydroid weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el comprovant de compra per a reclamacions de garantia.
