MicroZone MC6C-Mini V2 2.4G 6CH Controller Transmitter and MC7RB Receiver Instruction Manual

1. Introducció

This manual provides detailed instructions for the MicroZone MC6C-Mini V2 2.4G 6-channel controller transmitter and the MC7RB receiver radio system. This system is designed for a wide range of remote-controlled models including fixed-wing aircraft, cars, boats, UAVs, and even mowers. Please read this manual thoroughly before operating your device to ensure safe and optimal performance.

2. Característiques del producte

• Wide range of applications (cars, ships, fixed wings, UAVs, mowers).
• Long control distance with anti-interference software algorithm.
• Long battery life (more than 8 hours with 4 AA or 2 lithium batteries).
• Smaller and lighter design compared to the old MC6C model.
• Supports simulation training via computer connection.
• Runaway protection settings for enhanced safety.
• Compatible with multiple MicroZone receivers (MC6RE-V2, MC7RB-V2, MC6RE, E6R-E, MC7RB, MC9002).
• Multiple settings and key locking functions.
• Key waterproof design.
• Mower throttle lock.

3. Especificacions

3.1. Transmitter (MC6C-Mini V2)

3.2. Receiver (MC7RE-V2)

4. Guia de configuració

4.1. Transmissor acabatview

4.2. Instal·lació de la bateria

1. Obriu la tapa del compartiment de les piles a la part posterior del transmissor.
2. Insert 4 AA batteries or connect 2 lithium batteries, ensuring correct polarity.
3. Tanqueu bé la tapa del compartiment de la bateria.

4.3. Connexió del receptor

Connect the receiver to your model's components (servos, ESC, etc.) using the appropriate channels. The MC7RE-V2 receiver provides 7 PWM signal outputs and 1 SBUS signal output.

4.4. Vinculació de l'emissor i el receptor

To establish communication between the transmitter and receiver:

1. Enceneu el receptor.
2. Press the BIND button on the receiver.
3. Engegueu l’interruptor d’alimentació del transmissor.
4. The binding process should complete successfully, indicated by the LED on the receiver.

5. Instruccions de funcionament

5.1. Controls bàsics

Refer to the 'Remote Control Function Analysis' diagram for the layout of controls:

• Llum de potència: Indica l'estat d'alimentació.
• Interruptor de mode: Selects operating mode.
• D/R Switch: Dual Rate switch.
• Channel 5 & 6 Switches: Auxiliary channel controls.
• Rocker (Left/Right): Main control sticks for movement.
• Throttle Trim (Left Hand Throttle): Adjusts throttle neutral point.
• Elevator Trim (Right Hand Throttle): Adjusts elevator neutral point.
• Rudder Trim: Adjusts rudder neutral point.
• Aileron Trim: Adjusts aileron neutral point.
• Interruptor d'alimentació: Encén/apaga el transmissor.
• Botó MIX: Activates mixing functions.
• AIL, ELE, THR, RUD Buttons: Channel reverse settings for Aileron, Elevator, Throttle, Rudder (Channels 1-4).
• Botó BLOC: Funció de bloqueig de tecles.
• V-Tail Mixed Control Indicator: Indicates V-tail mixing status.
• Delta Wing Mixed Control Indicator: Indicates delta wing mixing status.
• Hybrid Control Function Switch: Activates hybrid control.
• Channel Reverse Indicator: Shows channel reverse status.
• Indicador de bloqueig: Shows lock status.

5.2. Channel Reverse Setting

The AIL, ELE, THR, and RUD buttons allow you to reverse the direction of movement for Channels 1-4. Press the corresponding button to toggle the channel's direction as needed for your model.

5.3. Simulation Training

The transmitter can be connected to a computer for simulation training. Use the audio interface (dongle use) on the rear of the transmitter to connect to your computer and practice flying or driving your RC model virtually.

5.4. Control Distance

The MicroZone system utilizes a unique software algorithm to achieve a control distance of over 800 meters with strong anti-interference capabilities.

5.5. Vídeo de demostració del producte

6. Manteniment

• Keep the transmitter and receiver clean and free from dust and moisture. The 6C-MINI features a key waterproof design, but it is not fully submersible.
• Guardeu els dispositius en un lloc fresc i sec quan no els feu servir.
• Remove batteries from the transmitter if storing for extended periods to prevent leakage.
• Regularly check all switches and joysticks for smooth operation.
• Inspect antenna wires on the receiver for any damage.

7. Solució De Problemes

7.1. Runaway Protection

The system includes a runaway protection feature. If the receiver loses signal from the transmitter (e.g., transmitter is off, or distance exceeds range), the model will enter a pre-set protection mode to prevent damage. This ensures the model is not harmed when the signal is lost.

7.2. Problemes comuns

• Sense energia: Check battery installation and charge level. Ensure the power switch is in the 'ON' position.
• No response from model: Verify that the transmitter and receiver are properly bound. Check all connections between the receiver, servos, and ESC. Ensure the receiver is receiving power.
• Erratic control: Check for interference sources. Ensure receiver antennas are positioned correctly and not obstructed.
• Short control range: Ensure both transmitter and receiver antennas are undamaged and properly extended.

8. Consells d'usuari

• For optimal performance, always ensure your transmitter batteries are fully charged before use.
• Practice with a simulator before operating your RC model to familiarize yourself with the controls.
• When using the system for boats or other watercraft, ensure the receiver is adequately protected from water, despite the transmitter's 'key waterproof' feature.
• Regularly check the trim settings to ensure your model flies or drives straight without constant input.

9. Garantia i Suport

For any issues or support inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.