Lanparte LANC-02 Wireless LANC Remote Control User Manual

1. Introducció

The Lanparte LANC-02 is a wireless remote control system designed to provide convenient record start/stop functionality for compatible cameras, including Blackmagic and Z Cam models. This system enhances your filmmaking workflow by allowing remote operation, reducing camera shake, and enabling flexible camera placement.

The kit typically includes a wireless remote (transmitter) and a receiver unit that connects to your camera's LANC port. It also supports one-to-many control, allowing a single remote to control multiple cameras equipped with additional receivers (sold separately).

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:

Wireless Remote Control (Transmitter)
Unitat receptora
Spring Cable (for connecting receiver to camera)

Figure 1: Lanparte LANC-02 Wireless Remote Control Kit showing transmitter and receiver.

3. Identificació de components

Figure 2: Wireless Remote Control (Transmitter) with REC button and antenna.

Unitat receptora — Figure 3: Receiver Unit with coiled cable connection.

4. Instruccions de configuració

Attach Receiver to Camera: Connect the spring cable from the receiver unit to the LANC port (usually a 2.5mm jack) on your Blackmagic or Z Cam camera.
Receptor de muntatge (opcional): The receiver unit is compact and can be left dangling or secured to your camera rig using appropriate mounting accessories if desired.
Encès: Ensure your camera is powered on. The remote control (transmitter) is typically battery-powered and will activate when a button is pressed or may have a power switch (not explicitly shown, assume auto-on or internal battery).
Aparellament (si cal): Most wireless remotes automatically pair. If the remote does not respond, refer to the Troubleshooting section or check for a pairing button/sequence (not specified in product info).

Lanparte LANC-02 connected to a Blackmagic camera — Figura 4: Example setup of the Lanparte LANC-02 remote control system with a Blackmagic camera.

Close-up of receiver connected to camera LANC port — Figure 5: Detail of the receiver unit connected to a camera's LANC port.

5. Instruccions de funcionament

Once the receiver is connected and the system is powered on, operating the Lanparte LANC-02 is straightforward:

Comença a gravar: Press the red "REC" button on the wireless remote control (transmitter) once to start recording.
Atura la gravació: Press the red "REC" button on the wireless remote control (transmitter) again to stop recording.

5.1 One-to-Many Control

The Lanparte LANC-02 system supports controlling multiple cameras simultaneously with a single transmitter. To utilize this feature, you will need to purchase additional receiver units (LANC-02 receivers) for each camera you wish to control. Connect each receiver to its respective camera's LANC port. The single transmitter will then broadcast the record command to all paired receivers within range.

6. Manteniment

Neteja: Use a soft, dry cloth to clean the remote and receiver units. Do not use liquid cleaners or solvents.
Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes quan no l'utilitzeu.
Bateria: While specific battery type is not provided, wireless remotes typically use small coin-cell or AAA batteries. Replace batteries when the remote's range or responsiveness decreases. Ensure correct polarity when inserting new batteries.
Cura del cable: Avoid sharp bends or excessive pulling on the spring cable to prevent damage.

7. Solució De Problemes

Problema	Causa possible	Solució
Remote not responding / Camera not recording.	Bateria baixa o gastada al comandament a distància. Receiver not properly connected to camera. La càmera no està engegada. Remote and receiver not paired (if manual pairing is required). Fora de rang o interferències de senyal.	Substituïu la bateria del comandament. Ensure spring cable is securely plugged into the camera's LANC port. Enceneu la càmera. Check product documentation for pairing instructions if automatic pairing fails. Move closer to the camera; ensure no large obstructions or strong wireless signals nearby.
Abast sense fil limitat.	Bateria baixa. Environmental interference (e.g., Wi-Fi, other wireless devices). Physical obstructions.	Substituïu la bateria del comandament. Minimize other wireless devices in the area. Ensure a clear line of sight between the remote and receiver.

8. Especificacions

Número de model	LANC-02
Nom de marca	LanParte
Tipus de producte	Wireless LANC Remote Control
Compatibilitat	Blackmagic Camera, Z Cam
Funció de control	Inici/Atura de gravació
Connectivitat	Wireless (Transmitter to Receiver), Wired (Receiver to Camera)
Característiques especials	One-to-many control (requires additional receivers)
Pes del paquet	0.5 kg
Dimensions del paquet (L x W x H)	11 cm x 11 cm x 11 cm

9. Consells d'usuari

For optimal wireless performance, try to maintain a clear line of sight between the remote control and the receiver unit.
Always check the battery level of your remote before important shoots to avoid interruptions.
Test the remote's functionality with your camera setup before a critical recording session to ensure everything is working correctly.
When using the one-to-many control feature, ensure all receivers are within the effective range of the transmitter for reliable operation.

10. Garantia i Suport

Per obtenir informació sobre la garantia i assistència tècnica, consulteu la documentació que s'inclou amb la compra o poseu-vos en contacte directament amb el venedor/fabricant. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

LanParte LANC-02