1. Introducció
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your DG11R2-01-1 Air Conditioner Remote Control. This remote is designed for use with Hisense air conditioning units, offering a wide range of functions including heating, cooling, and temperature unit switching between Fahrenheit and Celsius.
2. Configuració
2.1 Instal·lació de la bateria
- Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
- Feu lliscar la tapa de la bateria cap avall per obrir el compartiment.
- Insert two (2) AAA batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Feu lliscar la coberta de la bateria al seu lloc fins que faci un clic de manera segura.
3. Instruccions de funcionament
Familiarize yourself with the buttons and their functions as shown in the diagram below:
3.1 Funcions bàsiques
- Encès/apagat: Premeu el botó Botó d'encesa (usually top right) to turn the air conditioner on or off.
- Ajust de temperatura: Utilitza el TEMP ▲ (Amunt) i TEMP ▼ (Down) arrow buttons to increase or decrease the desired temperature.
- Selecció del mode: Premeu el botó MODE button to cycle through available operating modes (e.g., AUTO, COOL, DRY, HEAT, FAN).
- Velocitat del ventilador: Premeu el botó LA VELOCITAT DEL VENTILADOR button to adjust the fan intensity (e.g., Low, Medium, High, Auto).
- swing: Premeu el botó GRONXADOR button to activate or deactivate the automatic louver swing function.
3.2 Funcions avançades
- Mode de repòs: Premeu DORMIR for energy-saving operation and reduced noise during sleep.
- Mode silenciós: Premeu TRANQUIL per a un funcionament ultrasorollós.
- Super Mode: Premeu SUPER for rapid cooling or heating.
- Temporitzador d'encesa/apagada: Ús TEMPORIZADOR ON/OFF to set a specific time for the air conditioner to automatically turn on or off.
- Atenuador: Premeu DIMMER to adjust the brightness of the air conditioner unit's display.
- Rellotge: Premeu RELOJ to set the current time on the remote's display.
- Mode econòmic: Premeu ECONOMIA for optimized energy-efficient operation.
- SENTO: Premeu SENTO to activate the temperature sensor in the remote control, allowing for more precise temperature regulation based on the remote's location.
- Mode intel·ligent: Premeu INTELLIGENT for intelligent automatic operation, where the unit selects the best mode and settings.
- Autoneteja: Premeu AUTONETEJA to initiate the self-cleaning function of the air conditioner unit.
3.3 Switching Between Fahrenheit and Celsius
To switch the temperature display between Fahrenheit (°F) and Celsius (°C):
- Manteniu premut el botó MODE botó i el TEMP ▼ (Down) button simultaneously for 3 to 5 seconds.
- The display unit will change accordingly. Repeat the process to switch back.
4. Manteniment
4.1 Substitució de la bateria
Replace the batteries when the remote control's display dims, or its responsiveness decreases. Always replace both AAA batteries simultaneously with new ones to ensure optimal performance.
4.2 Neteja
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the remote's surface or internal components.
4.3 Emmagatzematge
Store the remote control in a dry place, away from direct sunlight, high humidity, and extreme temperatures. If the remote will not be used for an extended period, it is advisable to remove the batteries to prevent leakage.
5. Solució De Problemes
5.1 El comandament a distància no respon
- Comproveu la polaritat de la bateria: Ensure the AAA batteries are inserted with the correct positive (+) and negative (-) orientation.
- Substituïu les piles: If the batteries are old or depleted, replace them with a fresh pair.
- Línia de visió: Ensure there is a clear, unobstructed line of sight between the remote control and the air conditioner unit's infrared receiver.
- Apuntar correctament: Point the remote control directly at the air conditioner unit.
5.2 Temperature Unit Not Changing (Fahrenheit/Celsius)
- Premsa simultània: Make sure you are pressing and holding both the MODE i TEMP ▼ buttons at the exact same time.
- Durada de la retenció: Hold the buttons for the required 3 to 5 seconds. A brief press will not activate the change.
- Comprovar la pantalla: Observe the remote's display for the unit change.
6. Especificacions
| Característica | Detall |
|---|---|
| Número de model | DG11R2-01-1 |
| Nom de marca | zap (Compatible with Hisense) |
| Ús | Aire condicionat |
| Comunicació sense fils | IR (infrarojos) |
| Material | Material ABS |
| Bateries | 2 piles AAA (no incloses) |
| Canal | 1 |
| Certificació | CE |
| Origen | Xina continental |
7. Garantia i Suport
For any operational issues, technical support, or inquiries regarding your remote control, please contact the seller or manufacturer directly. When seeking support, please have your product model number (DG11R2-01-1) readily available.
8. Consells d'usuari
- For optimal performance, always ensure the remote control is within a reasonable distance of the air conditioner unit and that no physical obstructions block the infrared signal.
- When replacing batteries, always use fresh batteries of the same type (AAA) to ensure consistent and reliable performance.
