A82-S TURBO RACING 2.4G Remote Control and RX200 Gyroscope Receiver User Manual

Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your TURBO RACING A82-S 2.4G Remote Control and RX200 Gyroscope Receiver. This advanced dual-system remote control is designed for RC cars and ships, offering precise control and a range of intelligent features to enhance your remote-controlled experience.

Contingut del paquet

Si us plau, comproveu el contingut del paquet per assegurar-vos que hi hagi tots els elements:

• A82-S Remote Control
• TB-RX200 Receiver
• Temperature Control Wire
• Corretja
• Manual d'instruccions (aquest document)

Configuració

1. Battery Installation (A82-S Remote Control)

1. Locate the battery compartment on the bottom of the A82-S remote control.
2. Obriu la tapa del compartiment de la bateria.
3. Introduïu quatre (4) piles AA, assegurant-vos de la polaritat correcta (+/-).
4. Tanqueu bé la tapa del compartiment de la bateria.

Note: The remote control features a low voltage alarm. If AA battery voltage drops below 4.4V, or a 2-cell lithium battery drops below 7.2V, a buzzer will sound and the screen will display a low voltage advertència.

2. Receiver Connection (TB-RX200)

The TB-RX200 is a 7-channel gyroscope receiver. Connect it to your RC model's electronic speed controller (ESC), steering servo, and other components according to your model's specific wiring diagram. Ensure all connections are secure.

• The RX200 receiver supports the V3.1 (SYS01) system.
• It is compatible with both digital and analog servos.

3. Vinculació de l'emissor i el receptor

Typically, 2.4G systems require binding the transmitter (remote control) to the receiver. Refer to your RC model's specific instructions for the binding procedure. Generally, this involves:

1. Power on the receiver while holding a bind button (if present).
2. Power on the transmitter while holding its bind button (if present).
3. Wait for indicator lights to confirm successful binding.

Instruccions de funcionament

Control remot acabatview

• Antena: Transmits the 2.4GHz signal.
• Throttle LED Indicator: Provides visual feedback for throttle status.
• Pantalla LCD: Shows current settings, battery voltage, stopwatch, and other information.
• Menu Keys (SEC, MENU, CCS, BACK): Navigate and adjust settings.
• Cronòmetre: For timing laps or runs.
• Throttle Switch: Controls acceleration and braking.
• Interruptor d'alimentació: Encén/apaga el comandament a distància.
• Control de creuer: Activates/deactivates the cruise control system.
• Mànec: Empunyadura ergonòmica per a un ús còmode.
• Compartiment de la bateria: Houses the AA batteries.
• Channel 1 Wheel: Controls left and right steering direction.

• Throttle Trim (Control Channel 2): Fine-tunes the neutral position of the throttle.
• Steering Trim (Control Channel 1): Fine-tunes the neutral position of the steering.
• V.1 System (Channel 5) / Gyroscope: Adjusts gyroscope sensitivity or other V.1 system functions.
• Channel 4 (Left/Center/Right 3 Gears): A three-position switch for auxiliary functions.
• Steering Ratio: Ajusta l'angle màxim de direcció.
• Canal 6: Auxiliary channel.
• Channel 7 (Custom Positive/Reverse Output): Auxiliary channel with configurable output direction.
• Channel 2 (Control Acceleration, Deceleration, Braking, Reverse): Main throttle control.
• Channel 3 (Control Positive/Reverse Output): Auxiliary channel with configurable output direction.

Característiques i funcions clau

Memòria del model

The A82-S remote control can store up to 15 sets of model data (01-15), allowing for quick recall of settings for different RC models.

Sistema de control de creuer

Once the desired throttle depth (range 000-120) is set, the system automatically maintains that throttle position without requiring continuous input from the trigger, allowing the vehicle to travel at a fixed speed.

Funció d'il·luminació LED

The remote control features an integrated LED light for illumination, useful when operating in low-light conditions or at night.

Forward/Reverse (REV)

This function allows you to adjust the control direction for servos or motors connected to channels 1 (steering), 2 (throttle), CH3, CH4, CH5, and CH6. This is crucial for ensuring your model responds correctly to inputs.

Curve Setting (EXP)

Adjusts the linearity of the steering and throttle channels. The adjustable range is -100% to +100%. When the value is 0%, the curve is linear. Positive values increase sensitivity near the center, while negative values decrease sensitivity near the center and increase it at the extremes.

Automatic Braking (ABS)

This function adjusts the throttle channel output to provide automatic braking. It helps adapt to different track conditions and driving styles, achieving optimal braking effects and preventing oversteer or insufficient turning in corners.

Protecció de seguretat

In the event that the receiver loses signal from the transmitter, this function automatically moves the model's servos to a preset position. This helps protect the model from damage and ensures safety.

Crawler Mode

Designed for crawler vehicles, this mode is applicable to models where both front and rear wheels can steer. It offers four distinct modes:

• A: Controls front wheel steering only.
• B: Controls rear wheel steering only.
• C: Controls front and rear wheels to steer in the same direction.
• D: Controls front and rear wheels to steer in opposite directions.

Intelligent Car Control (TB-RX200 Receiver Only)

This feature, exclusive to the TB-RX200 receiver, utilizes the receiver's gyroscope for intelligent vehicle control. It helps ensure the vehicle travels in the intended direction, even on challenging terrain or during sharp turns.

Restaura la configuració de fàbrica

A convenient one-key shortcut to restore settings. There are two options:

• RST-R: Restaura tota la configuració als valors predeterminats de fàbrica.
• RST-M: Restores only the current model's settings to factory defaults.

Voltage Measurement Mode

The remote control can measure the voltage of 2-cell or 3-cell lithium batteries, providing real-time battery status.

Mode de mesura de temperatura

Allows for measuring the temperature of external components, with a measurement range of 25°C to 160°C. This is useful for monitoring motor or ESC temperatures.

Manteniment

• Neteja: Use a soft, dry cloth to clean the remote control and receiver. Avoid using solvents or harsh chemicals.
• Emmagatzematge: Store the remote control and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the remote control if storing for extended periods to prevent leakage.
• Protecció del receptor: The TB-RX200 receiver is designed with a high level of protection against water and dust. While durable, avoid prolonged submersion or exposure to corrosive liquids.

Resolució de problemes

Especificacions

A82-S Remote Control

TB-RX200 Receiver

Consells per a l'usuari

• Always ensure your remote control batteries are fully charged or fresh before operating your RC model to avoid unexpected power loss and failsafe activation.
• Experiment with the 'Curve Setting' (EXP) to fine-tune the responsiveness of your steering and throttle to match your driving style and track conditions.
• Utilize the 'Model Memory' feature to save and quickly switch between settings for different RC cars or boats you operate with this remote.
• For crawler enthusiasts, the dedicated 'Crawler Mode' offers specialized steering options that can significantly improve control on challenging terrain.

Garantia i suport

Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte directament amb el distribuïdor o el fabricant. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.