CYCLAMI CY180 Intelligent Bicycle Tail Light Instruction Manual

1. Producte acabatview

The CYCLAMI CY180 is an advanced bicycle tail light designed to enhance safety and visibility for cyclists. It features 184 high-brightness LED beads, offering clear and dynamic pattern displays. Key functionalities include wireless remote control, intelligent brake sensing, and automatic start-stop, making it a smart companion for your rides.

This tail light supports up to 14 dynamic patterns, which can be switched at will, and includes a "same frequency mode" for synchronized group riding. Its intelligent brake sensor automatically activates a high-brightness mode upon detecting braking, significantly reducing the risk of rear-end collisions. For convenience, it also features vibration sensing for automatic wake-up and shutdown.

2. Contingut del paquet

The standard edition package includes the following items:

• CY180 Expression Tail Light
• S11 Cushion Version Bracket
• S10 Seat Post Strap Base (Beveled)
• Cushion Bracket Ties (zip ties)
• Cable de càrrega USB TYPE-C

*Note: The wireless remote control is an optional accessory and may need to be purchased separately depending on the product variant.

3. Configuració i instal·lació

3.1 Càrrega del llum posterior

Before first use, fully charge the tail light using the provided TYPE-C USB cable. The charging port is located on the side of the device.

To check the battery level when the power is off, click the switch once. The screen will display the remaining power (e.g., 100%, 70%, 50%, 10%).

3.2 Muntatge del llum posterior

The tail light can be mounted to your bicycle's seatpost using the S10 Seat Post Strap Base or to the saddle rails using the S11 Cushion Version Bracket and included ties. Ensure the light is securely fastened and visible from the rear.

4. Instruccions de funcionament

4.1 Power On/Off and Pattern Switching

To turn on the tail light, press and hold the power button on the light for 2 seconds. Once on, click the switch to cycle through the available patterns. To turn off, press and hold the power button again.

4.2 Comandament a distància (opcional)

If you have the optional wireless remote control, you can use it to control the tail light. The remote allows you to switch patterns and activate turn signals.

Refer to the video demonstration for pairing and usage:

**Remote Control Functions (as shown in video):**

• **Initial Pairing:** Tap the tail light switch four times in a row until the screen displays an 'X' pattern. Then, press and hold the remote control switch until the tail light responds.
• **Left Turn Signal:** Click the left arrow button on the remote.
• **Right Turn Signal:** Click the right arrow button on the remote.
• **Toggle Pattern:** Click the switch button on the remote to cycle through patterns.

4.3 Intelligent Brake Sensing

The tail light automatically enters a high-brightness mode when it detects braking, providing an extra layer of safety by alerting following traffic.

4.4 Automatic Start-Stop and Vibration Sensing

The tail light is equipped with vibration sensing for automatic power management:

• If stationary for 30 seconds, it enters hibernation mode.
• If stationary for 30 minutes, it enters shutdown mode.
• A vibration will wake the light from hibernation.

4.5 Co-frequency Mode (Group Riding)

For group rides, multiple CY180 tail lights can synchronize their patterns. This feature requires more than two tail lights.

1. Select one tail light as the "host" unit.
2. Double-click the switch on the host unit; the screen will show a "rocker" pattern.
3. On the other tail lights (sub units), double-click their switches to connect.
4. Once connected, the sub units will synchronize patterns with the host unit.

5. Manteniment i cura

5.1 Impermeabilització

The CY180 tail light has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. It is suitable for use in rainy conditions.

**Important:** While IPX6 rated, avoid prolonged immersion in water.

5.2 Neteja

Netegeu el llum posterior amb un drap suauamp tela. No utilitzeu netejadors abrasius ni dissolvents.

6. Solució De Problemes

6.1 Remote Control Not Activating Light

If the remote control is unable to turn on the tail light, ensure the tail light itself is powered on and not in a deep sleep or off state. The remote control primarily sends signals to change patterns or activate turn signals once the tail light is active. To power on the tail light, press and hold its physical switch for 2 seconds.

If the remote control is not responding to pattern changes or turn signals, try re-pairing it with the tail light. Refer to the operating video (Video 1) for detailed instructions on pairing and usage.

7. Especificacions

8. Garantia i Suport

This product is covered by AliExpress's buyer protection policies, including:

• **Free Returns:** Free returns within 90 days.
• **Fast Delivery Guarantee:** Collect a $1.00 coupon for late delivery. Refunds are available if the package is lost or items are damaged, or if there is no delivery within 30 days.
• **Security & Privacy:** Your personal details are kept safe and not shared with third parties without consent.
• **Certified Brands:** This is a certified brand item with a genuine product commitment.

For further support or warranty claims, please contact the seller directly through the AliExpress platform.