eWeLink APP Smart Controller Module (4 Channels Wifi Switch Relay) Instruction Manual

1. Producte acabatview

This wireless switch is a low-cost, affordable device that allows users to remotely turn on/off connected appliances of different types and brands via the EWeLink app from anywhere, anytime. By setting timing schedules, you can maintain a carefree life. It can also be controlled by an RF remote controller indoors. The module can connect and control four appliances on the APP simultaneously, allowing independent control of each of the four channels. It supports timing functions and device sharing for family control. Voice control is available via Alexa and Google Home/Nest for an intelligent smart home experience.

2. Especificacions

Comandament a distància RF (opcional)

• Vol. Operatiutage: DC12V (requires 1x 23A/12V battery, not included)
• Freqüència de transmissió: 433 MHz
• Encoding Type: Learning code
• Transmission Distance: 10-100M (Open field)

3. Configuració

3.1 Requisits previs

• Your smartphone or tablet must be connected to a 2.4GHz Wi-Fi network with internet access.
• You must have the correct Wi-Fi password for your network.
• Your smartphone or tablet must have access to the APP Store (iOS) or Google Play (Android).
• Your Wi-Fi router should be configured to allow new device connections (Mac-open).

3.2 Instal·lació de l'aplicació i configuració del compte

1. Baixeu i instal·leu el EWeLink mobile application from your device's APP Store or Google Play.
2. Open the EWeLink app.
3. Register for a new EWeLink account if you don't have one. If you already have an account, simply log in.

3.3 Cablejat del dispositiu

Important: Ensure all power is disconnected before performing any wiring. Incorrect wiring can damage the device or cause electrical hazards. If you are unsure, consult a qualified electrician.

3.4 Device Pairing (Wi-Fi)

1. Power up the device after wiring.
2. Long press the configuration button on the module for approximately 5-7 seconds until the red LED indicator begins to blink rapidly. This indicates the device is in pairing mode.
3. In the EWeLink app, tap the "+" icon to add a new device.
4. Select the "Quick Pairing" mode. If quick pairing fails, you can try the "Compatibility Mode (AP)".
5. Enter your 2.4GHz Wi-Fi network name and password when prompted.
6. Wait for the app to connect to the device. Once connected, the Wi-Fi LED on the module will be solid.
7. Name your device in the app and complete the setup.

Video demonstrating the Wi-Fi pairing process with the EWeLink app.

3.5 RF Remote Pairing (if applicable)

If your module supports RF control and you have a compatible 433MHz learning code remote:

1. Press and hold the 433MHz pairing button on the module for 4 seconds.
2. While the module is in pairing mode, long press any key on your RF remote control. The module's indicator light will confirm successful pairing.

To clear all paired RF remotes, long press the pairing button on the module for 10-15 seconds.

4. Instruccions de funcionament

4.1 Controlling Devices via EWeLink App

• Once the device is added to the EWeLink app, you will see its status and control options.
• Tap the ON/OFF buttons within the app to control each of the four channels independently.
• The app will display the real-time status of the manual control switch.

4.2 modes de treball

The module supports three working modes: Inching, Self-locking, and Interlock. You can switch between these modes using the 'Mode Switch' button on the device or through the EWeLink app.

• Mode d'avanç lent: When a channel is switched ON, it will automatically turn OFF after a preset duration. The default inching time is 1 second, but it can be customized from 1 to 3600 seconds in the EWeLink app.
• Mode d'autobloqueig: Each channel operates like a normal switch, allowing you to turn it ON or OFF independently without affecting other channels.
• Mode d'enclavament: When one channel is switched ON, all other channels will automatically turn OFF. This ensures only one device is active at a time.

4.3 Temps i programació

The EWeLink app allows you to set various timing functions:

• Single Timer: Set a specific time for a device to turn ON or OFF once.
• Temporitzador de repetició: Schedule devices to turn ON/OFF at recurring times on specific days.
• Temporitzador de compte enrere: Set a countdown for a device to turn ON or OFF after a specified period.
• Temporitzador de bucle: Automate repetitive ON/OFF cycles.

4.4 Integració del control per veu

The smart switch is compatible with popular voice assistants:

• Amazon Alexa: Link your EWeLink account to Alexa to control connected devices with voice commands (e.g., "Alexa, turn off kitchen lights").
• Google Home/Nest: Link your EWeLink account to Google Home/Nest to control devices with voice commands (e.g., "Hey Google, open garage door").

4.5 Compartir en família

You can share control of your smart devices with family members through the EWeLink app, allowing everyone to enjoy the convenience of smart home automation.

5. Manteniment

To ensure optimal performance and longevity of your smart controller module:

• Mantingueu el dispositiu net i lliure de pols. Feu servir un drap sec i suau per netejar-lo.
• Eviteu exposar el dispositiu a temperatures extremes, humitat elevada o llum solar directa.
• Do not attempt to disassemble or repair the device yourself. This may void any potential warranty and could lead to damage or injury.
• Ensure proper ventilation around the module to prevent overheating.

6. Solució De Problemes

• El dispositiu no s'està emparellant:
  • Ensure your smartphone/tablet is connected to a 2.4GHz Wi-Fi network, not 5GHz.
  • Verifiqueu que heu introduït la contrasenya Wi-Fi correcta.
  • Check if your router is Mac-open (allows new devices to connect).
  • If "Quick Pairing" fails, try "Compatibility Mode (AP)" in the EWeLink app.
  • Ensure the device is powered on and the red LED is blinking rapidly during pairing attempts.
• El comandament a distància RF no funciona:
  • Confirm your RF remote is a 433MHz learning code type. Clone codes and rolling code remotes are not supported.
  • Ensure the remote's battery (23A/12V) is installed correctly and has sufficient charge.
  • Re-attempt the RF pairing process as described in Section 3.5.
  • Remember the system can store a maximum of 20 remotes. If more are added, the oldest ones will be lost.
• Dispositiu fora de línia a l'aplicació:
  • Check your Wi-Fi connection and internet access.
  • Assegureu-vos que el dispositiu estigui dins de l'abast del vostre encaminador Wi-Fi.
  • Restart the smart switch module by cycling its power.
  • Reinicieu el vostre encaminador Wi-Fi.

7. Consells d'usuari

• Customizing Inching Time: The default inching time is 1 second. You can adjust this duration from 1 second to 3600 seconds (1 hour) within the EWeLink app settings for your device.
• Compatibilitat amb control remot RF: Quan es compraasing an RF remote, ensure it is a 433MHz learning code type. Clone codes and rolling code remotes are not compatible with this module.
• Remote Storage Limit: The module can store up to 20 RF remotes. If you attempt to pair more than 20, the oldest paired remotes will be overwritten and lose their connection.
• Versatilitat de l'aplicació: This module is suitable for various applications including access control, PC boot control, garage doors, house doors, lamps, curtains, gates, and other remote-controlled devices in factories, farms, offices, and instruments.

8. Garantia i Suport

For technical support or inquiries, please contact the manufacturer:

• Fabricant: ShenZhen Scimagic Development Technology Co.,Ltd
• Adreça: Gebu Building 1406, Songgang, Baoan Shenzhen, China.

Please refer to the seller's terms and conditions for specific warranty information.