1. Producte acabatview
The Papifeed Smart Timing Automatic Pet Feeder is designed to provide scheduled meals for your pets, ensuring they are fed consistently and on time. It features a user-friendly interface, dual power options, and a detachable stainless steel bowl for hygiene.
Components:
- Lid with dry bag compartment
- Food Hopper (4.5L capacity)
- Pantalla LCD
- Marc principal
- Outlet de dispensació
- Bol d'acer inoxidable
- Suport de bol
- AC Power Adapter (US Plug Type)
- Manual d'usuari
2. Instruccions de configuració
Follow these steps to set up your Papifeed Automatic Pet Feeder:
- Desembalatge i inspecció: Carefully remove all components from the packaging. Ensure all parts listed in the Product Overview estan presents i sense danys.
- Assemble Bowl Holder: Attach the bowl holder to the main frame of the feeder.
- Insert Stainless Steel Bowl: Col·loqueu el bol d'acer inoxidable al suport del bol.
- Connecteu-vos a la font d'alimentació:
- Alimentació CA: Connect the provided AC adapter to the feeder's power input and plug it into a standard US electrical outlet.
- Bateria de reserva (opcional): Per poder outage protection, insert 4 x D-Cell batteries (not included) into the battery compartment located at the bottom of the feeder. This ensures continuous operation in case of AC power loss.
- Omplir la tremuja d'aliments: Open the lid and pour dry pet food into the food hopper. The feeder has a 4.5L capacity. Ensure the food kibble size is between 5-10mm to prevent jamming.
- Tanca la tapa: Securely close the lid to maintain food freshness and prevent spills.
3. Instruccions de funcionament
The Papifeed Automatic Pet Feeder features an LCD display and intuitive controls for easy programming.
Programming Meals:
The feeder allows you to set up to 4 daily distribution alarms and dispense from 1-9 portions per meal. Each portion is approximately 10g.
- Menú d'accés: Use the control buttons (typically labeled 'Menu' or with icons) to navigate the LCD display.
- Establir hora: Adjust the current time on the feeder to ensure accurate meal scheduling.
- Set Meal Times: For each of the 4 available meal slots, set the desired feeding time.
- Estableix la mida de la porció: For each meal, select the number of portions (1-9) to be dispensed. Each portion is approximately 10g.
- Desa la configuració: Confirm and save your programming. The feeder has a failsafe recovery system that memorizes your previous programming automatically.
Alimentació manual:
Most automatic feeders include a manual feed button for immediate dispensing of a single portion. Refer to the LCD display and button layout for this function.
4. Manteniment
Una neteja i un manteniment regulars garantiran la longevitat i el funcionament higiènic del menjador de la teva mascota.
- Cleaning the Stainless Steel Bowl: The stainless steel feeding bowl is detachable and can be easily removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry before reattaching.
- Cleaning the Food Hopper: Periodically empty the food hopper and wipe it clean with a dry or slightly damp drap. Assegureu-vos que estigui completament sec abans de tornar a omplir amb menjar.
- Cleaning the Dispensing Outlet: Check the dispensing outlet regularly for any food residue or blockages. Use a small brush or cloth to clear any debris. The strong impeller and sloppy design are intended to prevent food from getting stuck.
- Comprovació de la bateria: Monitora el voltage indicator on the LCD display. Replace D-Cell batteries when the indicator shows low power to ensure continuous operation during power outages.
5. Solució De Problemes
- El dispensador no dispensa menjar:
- Check if the food hopper is empty.
- Ensure the power adapter is securely connected or batteries are properly installed and charged.
- Verify that the food kibble size is within the recommended 5-10mm range. Larger kibble may cause blockages.
- Check the dispensing outlet for any obstructions.
- La pantalla no funciona:
- Ensure the feeder is powered on and connected to a power source.
- If using batteries, check their charge level and replace if necessary.
- Food getting stuck:
- Confirm that the food kibble size is appropriate (5-10mm).
- Clean the dispensing mechanism and impeller to remove any accumulated residue.
6. Especificacions
| Característica | Detall |
|---|---|
| Número de model | PF023 |
| Nom de marca | Papifeed / YTYIN |
| Capacitat | 4.5 litres |
| Material | ABS Plastic, Stainless Steel (bowl) |
| Font d'alimentació | DC 6V 1A (AC Adapter) + 4x D-Cell Batteries (not included) |
| Voltage | DC 6V 1A |
| Tipus d'endoll | US |
| Sortida mínima | 50 g |
| Sortida màxima | 500 g |
| Configuració de l'hora | Sí |
| Pantalla LCD | Sí |
| És un dispositiu intel·ligent | Sí |
| Apte per | Gats, gossos, animals petits |
| Pes | 2.1 KG |
| Mida de l'embalatge | 210 * 210 * 342 mm |
| Certificats | CE, ROHS, FCC |
7. Consells d'usuari
- Always ensure the lid is securely closed after refilling the food hopper to maintain food freshness and prevent pests.
- For optimal performance and to prevent food jams, use dry kibble within the recommended size range of 5-10mm.
- Regularly check the battery indicator, especially if you rely on battery backup, to ensure uninterrupted feeding schedules.
8. Garantia i Suport
For any questions, technical support, or warranty claims regarding your Papifeed Automatic Pet Feeder, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
