1. Introducció
The Gaqqee W3103 is a versatile digital temperature control system designed for precise temperature management in various applications, including heating and heat dissipation. It features a wide temperature measurement range, high control accuracy, and multiple operational modes, making it suitable for household and industrial use. This manual provides detailed instructions for the safe and efficient operation of your W3103 temperature controller.
2. Informació de seguretat
Please read and understand all safety instructions before installing or operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- Assegureu-vos que la font d'alimentació voltage matches the device's requirements (DC12V, DC24V, or AC220V).
- Disconnect power before making any wiring connections or performing maintenance.
- All wiring should be performed by a qualified electrician in accordance with local electrical codes.
- No utilitzeu el dispositiu en mullat o damp condicions.
- Keep the device away from flammable materials and explosive gases.
- No intenteu desmuntar o modificar el dispositiu.
- The temperature sensor is an integral part of the system; ensure it is properly installed and protected.
3. Especificacions
| Característica | Especificació |
|---|---|
| Nom del producte | Controlador de temperatura |
| Model | W3103 |
| Entrada Voltage | DC12V / DC24V / AC220V (optional) |
| Tipus de funció | Control de temperatura |
| Tipus de sortida | Voltage Sortida |
| Tipus de control | Control de posició |
| Entrada de mesura | NTC10KB3950L=1 meter sensor |
| Interval de mesura de temperatura | -50 °C a 110 °C |
| Interval de control de temperatura | -19 °C a 99 °C |
| Potència de sortida | 300W / 600W / 5000W (depending on model/voltage) |
| Precisió de la mesura de la temperatura | ±0.2 °C |
| Control de precisió | 1 °C |
| Corrent màxima | 30A |
| Aparença Mida | 96 x 70 x 46 mm |
| És un dispositiu intel·ligent | No |
| Bateria inclosa | No |
4. Contingut del paquet
- W3103 Digital Temperature Controller (x1)
Note: The NTC temperature sensor is typically integrated or included with the controller.
5. Configuració i cablejat
Before connecting, ensure the power supply is disconnected. The W3103 supports DC12V, DC24V, or AC220V input. Select the appropriate model for your power source.
5.1 Wiring Diagram (DC12V/24V Example)
Passos de cablejat:
- Entrada d'alimentació: Connect your DC12V or DC24V power source to the "enter" terminals (N and L). Ensure correct polarity (+ and -).
- Sortida de càrrega: Connect your heating or cooling device (load) to the "output" terminals (N and L). The W3103 provides direct voltage output to control the load.
- Posada a terra: If applicable, connect the ground wire to the designated ground terminal.
- Sensor de temperatura: Connect the NTC temperature sensor (L=1 meter) to the sensor input port. Ensure it is securely connected and placed in the environment where temperature needs to be measured.
Caution: For AC220V models, wiring will differ. Always consult a qualified electrician for AC installations to prevent electric shock and ensure safety.
6. Instruccions de funcionament
The W3103 features a digital display and three buttons: "Start setting" (Up arrow), "Stop setting" (Down arrow), and "SET".
6.1 Funcions dels botons anteriorsview
- Start Setting (Up Arrow): Used to increase values or initiate setting adjustments.
- Stop Setting (Down Arrow): Used to decrease values or initiate setting adjustments.
- Botó SET:
- Premsa curta: Switches between working modes (Temperature Control, F1 Intermittent Work, F2 Scheduled Shutdown, F3 Scheduled Startup).
- Long Press (3+ seconds): Enters the Temperature Correction Setting.
6.2 Mode de control de temperatura
After power-on, the middle of the screen displays the real-time temperature. If it's not showing a number, short press the SET button to switch to temperature control mode.
- Setting Start Temperature: Press the "Start setting" (Up arrow) button. The start temperature display will flash. Use the Up/Down arrows to adjust the desired start temperature. The setting will automatically save after a few seconds of no operation.
- Setting Stop Temperature: Press the "Stop setting" (Down arrow) button. The stop temperature display will flash. Use the Up/Down arrows to adjust the desired stop temperature. The setting will automatically save after a few seconds of no operation.
The device will activate the output when the temperature reaches the start setting and deactivate when it reaches the stop setting, or vice-versa, depending on whether it's configured for heating or cooling.
6.3 Intermittent Mode (F1)
Short press the SET button until "F1" is displayed in the middle of the screen.
- Setting Start Time (Minutes): Press the "Start setting" (Up arrow) button. The start time display (minutes) will flash. Use the Up/Down arrows to adjust the desired ON duration.
- Setting Stop Time (Minutes): Press the "Stop setting" (Down arrow) button. The stop time display (minutes) will flash. Use the Up/Down arrows to adjust the desired OFF duration.
The device will cycle the output based on the set ON and OFF durations.
6.4 Timing Shutdown Mode (F2)
Short press the SET button until "F2" is displayed in the middle of the screen.
- Setting Shutdown Hour: Press the "Start setting" (Up arrow) button. The hour digits will flash. Use the Up/Down arrows to adjust the desired shutdown hour.
- Setting Shutdown Minute: Press the "Stop setting" (Down arrow) button. The minute digits will flash. Use the Up/Down arrows to adjust the desired shutdown minute.
The device will operate normally and then shut down after the set duration.
6.5 Timing Boot Mode (F3)
Short press the SET button until "F3" is displayed in the middle of the screen.
- Setting Boot Hour: Press the "Start setting" (Up arrow) button. The hour digits will flash. Use the Up/Down arrows to adjust the desired boot hour.
- Setting Boot Minute: Press the "Stop setting" (Down arrow) button. The minute digits will flash. Use the Up/Down arrows to adjust the desired boot minute.
The device will remain off and then power on after the set duration.
6.6 Temperature Correction Function
If there is a discrepancy between the displayed temperature and the actual temperature (measured by a calibrated thermometer), you can use the temperature correction function.
- Enter Correction Setting: Long press the SET button for more than 3 seconds. The display will show a temperature correction code (e.g., "BCAJ") and the current correction difference.
- Adjust Correction Value: Use the "Start setting" (Up arrow) and "Stop setting" (Down arrow) buttons to adjust the temperature difference value. This value will be added to or subtracted from the measured temperature.
The setting will automatically save after a few seconds of no operation.
7. Manteniment
- Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Cura del sensor: Ensure the temperature sensor is clean and free from debris. Do not bend or damage the sensor cable.
- Connexions: Reviseu periòdicament totes les connexions del cablejat per assegurar-vos que estiguin ben fixades.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén | Sense subministrament d'alimentació; cablejat incorrecte; font d'alimentació defectuosa. | Check power connections; verify power source is active; ensure correct voltage (DC12V/24V/AC220V) is applied. |
| Lectura de temperatura incorrecta | Sensor faulty or improperly placed; temperature correction needed. | Check sensor connection and placement; use the temperature correction function (Section 6.6) to calibrate. |
| Output not activating/deactivating | Incorrect temperature settings; faulty load; wiring issue. | Verify start/stop temperature settings; check load functionality; inspect output wiring. |
| El mode no canvia | SET button not pressed correctly. | Ensure a short press for mode cycling or a long press for temperature correction. |
9. Consells d'usuari
- For critical applications, always use an independent thermometer to verify the W3103's readings, especially after initial setup or if temperature fluctuations are observed.
- When setting timing functions, double-check the hours and minutes to avoid unintended operation.
- Consider using a protective casing for the controller if it's exposed to dust or moisture in its operating environment.
10. Garantia i Suport
Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte directament amb el venedor o el fabricant. Conserveu el rebut de compra com a comprovant de compra.
A user manual in PDF format is also available for download: Descarrega el manual d'usuari (PDF)
