1. Introducció
The Twotrees TS1 Mini Laser Engraver is a compact and versatile device designed for personal and DIY engraving projects. It features a 3W laser, supports multiple connection methods (USB, Bluetooth), and is compatible with various materials like wood, paper, leather, and plastic. This manual provides essential information for safe and effective use of your TS1 engraver.
Figure 1: Twotrees TS1 Mini Laser Engraver and examples aplicacions.
2. Informació de seguretat
WARNING: Class IV Laser Product. Avoid direct exposure to eyes. Always wear laser goggles during operation.
To ensure safe operation of your Twotrees TS1 Mini Laser Engraver, please observe the following safety guidelines:
- Always wear the provided laser goggles when the laser is active.
- Do not open the protective cover during engraving operations. Be careful of laser damage.
- Mantingueu el dispositiu allunyat dels nens i de les mascotes.
- Operate the engraver in a well-ventilated area to dissipate fumes and odors from engraving.
- Ensure the engraver is placed on a stable, non-flammable surface.
- Never leave the engraver unattended during operation.
- Do not engrave highly reflective, transparent, or unknown materials without proper precautions and testing.
Figure 2: Safety features including protective cover, goggles, and exhaust port.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- TS1 Mini Laser Engraver unit
- Acrylic laser protective cover
- Ulleres de làser
- cable USB
- Adaptador de corrent
- Tornavís
- Test materials (e.g., wood, black plastic sheets)
- Manual d'usuari (còpia física)
Figura 3: Accessoris i components inclosos.
4. Guia de configuració
- Desembalatge: Traieu amb cura tots els components de l'embalatge.
- Col·locació: Place the engraver on a stable, level, and non-flammable surface in a well-ventilated area.
- Connexió d'alimentació: Connect the power adapter to the engraver's power input, then plug it into a suitable electrical outlet.
- Computer/Mobile Connection:
- Connexió USB: Connecteu el gravador a l'ordinador amb el cable USB proporcionat.
- Connexió Bluetooth: Enable Bluetooth on your mobile device and pair it with the TS1 engraver.
- Operació fora de línia: The device supports offline operation once engraving files es pengen.
- Instal·lació de programari: Install compatible software such as LightBurn or LaserGRBL for PC, or the MKSLaser mobile application.
- Ajust del focus: The laser head is adjustable for optimal focusing distance (2.5-6.5 cm). Rotate the laser head to achieve the sharpest, smallest laser dot on your material. This ensures precise engraving.
Figure 4: Multiple connection options for the TS1 engraver.
Figure 5: Adjustable laser focus mechanism and precision details.
Video 1: TS1 Mini Laser Engraver Setup and Engraving Demonstration.
5. Instruccions de funcionament
- Preparació del material: Place the material to be engraved within the engraving area (80x80mm). The machine cavity can support objects up to 30mm in height. Ensure the material is stable and flat.
- Utilitzeu ulleres de seguretat: Always wear the provided laser goggles before starting any engraving task.
- Interfície de programari:
- Open your chosen software (LightBurn, LaserGRBL, or MKSLaser app).
- Import your design. Supported formats include JPG, PNG, BMP, G-code, Gif, SVG, NC, GC.
- Ajusteu els paràmetres de gravat:
- Work Speed: Set the engraving speed (e.g., 800 mm/min).
- Potència làser: Adjust the laser intensity (e.g., 230, range 0-1000).
- Mida: Define the dimensions of your engraving.
- Style Setting: Utilize options like 'Gray', 'Strong', 'Sketch' to adjust brightness, contrast, and other image processing settings for optimal results.
- Preview i Posició: Use the software to preview the engraving path and adjust the material's position if necessary to ensure accurate placement.
- Comença el gravat: Once all parameters are set and the material is correctly positioned, initiate the engraving process from the software.
- Seguiment: Continuously monitor the engraving process. Do not open the protective cover during operation.
- Finalització: After engraving is complete, safely remove the engraved item.
Figure 6: Mobile application interface for controlling the TS1 engraver.
6. Manteniment
- Neteja de la lent del làser: Regularly clean the laser lens with a soft, lint-free cloth. Ensure the device is powered off and unplugged before cleaning.
- Neteja de la zona de gravat: Keep the engraving area free from dust and debris. Use a soft brush or compressed air to remove any residue.
- Port d'escapament: Ensure the exhaust port is clear to maintain proper ventilation and prevent smoke buildup.
- Emmagatzematge: When not in use, store the engraver in a dry, dust-free environment.
7. Solució De Problemes
- Sense sortida làser:
- Check if the power adapter is securely connected and the device is powered on.
- Verify that the USB or Bluetooth connection is active and stable.
- Ensure the laser power setting in your software is not set to zero.
- Confirm that the protective cover is properly closed, as some models have safety interlocks.
- Mala qualitat del gravat:
- Focus: Adjust the laser focus by rotating the laser head until the laser dot on the material is as small and sharp as possible.
- Configuració: Experiment with different laser power and speed settings for your specific material. Refer to online resources or material guides for recommended parameters.
- Material: Ensure the material is flat and securely placed to prevent movement during engraving.
- Problemes de connexió:
- USB: Try a different USB port or cable. Reinstall the device drivers if necessary.
- Bluetooth: Ensure Bluetooth is enabled on both your device and the engraver. Try unpairing and re-pairing the devices.
- El programari no respon:
- Restart the engraving software and the TS1 engraver.
- Check for any available software updates.
8. Especificacions
| Característica | Detall |
|---|---|
| Nom del producte | TS1 Mini Laser Engraving Machine |
| Main Body Color | Gris platejat |
| Material del cos principal | Injection molding + aluminum |
| Dimensions del producte (L x A x A) | 157 mm x 157 mm x 167 mm (6.22 polzades x 6.22 polzades x 6.69 polzades) |
| Àrea de gravat | 80mm x 80mm x 35mm (machine cavity supports objects 0-30mm high) |
| Potència làser | 3W |
| Optimal Focusing Distance | 2.5-6.5 cm (adjustable laser head) |
| Compatible Engraving Materials | Plywood, density board, solid wood board, paper, painted metal, kraft paper, leather, plastic, bamboo |
| Pes net del producte | Approx. 1025.7g (±100g) |
| Mida de l'embalatge | 203 mm x 210 mm x 196 mm |
| Font d'alimentació | 12V/2A |
| Consum d'energia en funcionament | 17.5W |
| Bluetooth | Admet |
| Emmagatzematge TF | Supported (built-in) |
| Port USB | Admet |
| Precisió del gravat | 0.1 mm |
| Velocitat màxima de gravat | 3000 mm/min |
| Acceleració màxima | 320 mm/min |
| Programari compatible | LightBurn, LaserGRBL, MKSLaser (mobile phone APP) |
| Controlador | GRBL |
| Dispositiu intel·ligent | Sí |
| Certificació | CE |
| CNC o no | CNC |
Figure 7: Product dimensions and engraving area.
9. Consells d'usuari
- Engraving LEGO Bricks: When engraving LEGO bricks, be aware that light-colored bricks may darken at the laser-engraved areas. For black bricks, the engraving effect may vary depending on the plastic's composition and laser settings. It is highly recommended to perform a test engraving on a spare or inconspicuous part of the LEGO brick using low power settings first to achieve desired results and avoid damage.
- Prova de materials: Always perform small test engravings on new materials or when using new settings to determine the optimal laser power and speed.
- Ventilació: Even with the built-in fan, ensure good room ventilation, especially when engraving materials that produce strong fumes.
10. Garantia i Suport
For warranty information, technical support, and service inquiries, please refer to the official TWO TREES website or contact your authorized retailer. Please retain your purchase receipt as proof of purchase for any warranty claims.
