1. Introducció
This manual provides instructions for the installation, maintenance, and replacement of the A06P Main Brush Replacement Kit, designed for 360 S8 and S8 PLUS Robot Vacuum Cleaners. Using high-quality replacement parts ensures your robot vacuum continues to perform optimally, maintaining a clean home environment.

2. Contingut del paquet
The A06P Main Brush Replacement Kit includes the following items:
- 2 raspalls principals
- 1 x raspall de neteja

3. Especificacions
| Característica | Detall |
|---|---|
| Model | A06P |
| Compatibilitat | 360 S8, 360 S8 PLUS Robot Vacuum Cleaner |
| Material | Plàstic |
| Brush Length | Uns 183 mm |
| Application Surfaces | Wooden Floor, Ceramic Tile, Marble, etc. |

4. Instruccions d'instal·lació
Follow these steps to replace the main brush in your 360 S8 or S8 PLUS robot vacuum cleaner:
- Apagar: Ensure your robot vacuum cleaner is powered off and disconnected from its charging base before beginning any maintenance.
- Accés al compartiment dels raspalls: Turn the robot vacuum cleaner upside down. Locate the main brush cover, usually secured by a few latches or screws.
- Remove the Old Brush: Open the main brush cover. Carefully lift out the old main brush. Note its orientation for correct installation of the new brush.
- Clean the Compartment: Use the provided cleaning brush or a soft cloth to remove any accumulated dust, hair, or debris from the brush compartment and the brush cover.
- Install the New Brush: Insert the new main brush into the compartment, ensuring the ends align correctly with the slots. The brush should fit snugly.
- Assegureu la coberta: Close the main brush cover and ensure it is securely latched or screwed back into place.
- Encès: Turn on your robot vacuum cleaner.

5. Manteniment i cura
Regular maintenance of your main brush is crucial for optimal cleaning performance and extending the lifespan of your robot vacuum.
- Neteja diària/setmanal: After each cleaning cycle or at least once a week, remove the main brush and use the provided cleaning tool to remove tangled hair, threads, and debris. Pay special attention to the brush ends where hair tends to accumulate.
- Freqüència de substitució: To maintain the best cleaning and filtering effect, it is recommended to replace the main brush every 2-3 months, depending on the frequency of use and the amount of debris collected.
- Inspecció: Periodically inspect the bristles for wear and tear. If bristles are bent, damaged, or missing, it's time for a replacement.

6. Solució De Problemes
If you experience issues with your robot vacuum's cleaning performance after replacing the main brush, consider the following:
- Rendiment de neteja reduït:
- Ensure the new main brush is installed correctly and securely.
- Check for any remaining debris or hair tangled around the brush or in the brush compartment.
- Verify that the vacuum's other components (e.g., side brushes, filter) are also clean and in good condition.
- Sorolls inusuals:
- Remove the main brush and re-install it, ensuring it clicks into place properly.
- Check for any foreign objects lodged in the brush or its bearings.
7. Garantia i Suport
This product is a replacement accessory. For specific warranty information regarding your 360 S8 or S8 PLUS robot vacuum cleaner, please refer to the original vacuum cleaner's user manual or contact the manufacturer directly.
For further assistance or inquiries about this replacement main brush kit, please contact your retailer or the product's seller.





