Haytrix H6C-2 Electric Bicycle Display User Manual

1. Introducció

The Haytrix H6C-2 is a horizontal mid-mounted VA color LCD display designed for electric bicycles. It provides essential riding data and control functions, enhancing your e-bike experience. This manual will guide you through the installation, operation, and maintenance of your H6C-2 display.

Avís important: The product protocol is UART 2. Please ensure that your e-bike's controller protocol matches to avoid compatibility issues and ensure proper functionality.

2. Especificacions

3. Contingut del paquet

The standard package for the H6C-2 Electric Bicycle Display typically includes:

• H6C-2 Display Unit
• Suport de muntatge
• Rubber Ring (for secure mounting)
• Cables de connexió
• Manual d'usuari (aquest document o una versió impresa)

4. Configuració i instal·lació

4.1 Muntatge de la pantalla

1. Select an appropriate position on your handlebar for the display.
2. Use the provided mounting bracket and rubber ring to securely attach the display to the handlebar. The display holder is compatible with handlebar diameters of 22.2mm, 25.4mm, 28.6mm, and 31.8mm.
3. Ensure the display is firmly fixed and does not obstruct your view o el control de la bicicleta.

4.2 Connexió del cablejat

The H6C-2 display uses a 5-core connector. Ensure proper connection to your e-bike's controller. Inappropriate interface replacement may affect the normal use of the display screen.

Nota: Part of the products use waterproof connections, so the wire colors may not be visible. The key is to match the connector type and ensure protocol compatibility.

5. Instruccions de funcionament

5.1 Introducció clau

• Encès/apagat: Long press the power button to turn the display on or off.
• Gear Adjustment (PAS): Short press the '+' key and '-' key to adjust the gear up and down.
• Function Display Switch: Short press the power key to switch the function display. The display cycles through total mileage, single mileage, current battery voltage, and current current display.

5.2 Display Content Explanation

The H6C-2 display shows various metrics on one page for easy monitoring:

• Velocitat: Current riding speed (KM/H or MPH).
• PAS (Pedal Assist System): Current assist level.
• Far: Indicator for headlight status.
• Bateria: Battery level indicator (E to F, with a bar graph).
• Àrea de visualització multifuncional: Shows total mileage (ODO), single mileage (TRIP), battery current voltage (VOL), current operating current (CUR), and error warnings.

5.3 Funcions avançades

• Llum frontal: When the display is on, press and hold the power key to turn the front light on/off.
• Mode de caminada: When the e-bike is stationary, press and hold the '-' button to enter 6KM/h walk mode. This mode can be locked (stays on after release) or non-locked (requires holding the button). To exit, press and hold the '-' button again or brake.
• Speed Mode Display: On the normal speed display interface, press and hold the '+' button and '-' button simultaneously to switch between average speed, maximum speed, and real-time speed. (Default is real-time SPEED).
• Interfície USB: The display features a USB port (5V/500mA) for emergency charging of mobile phones.

5.4 Parameter Settings (P-Codes)

To enter settings, press and hold the '+' and '-' buttons simultaneously. Use the power key to switch between parameters and the '+' / '-' keys to adjust values. Press and hold '+' and '-' again to save changes and exit.

• P02: Mileage Unit: 0: KM; 1: MILLA.
• P03: Voltage Nivell: 24V, 36V, 48V, 60V, 64V (default 36V).
• P04: Dormancy Time: 0: no dormancy; 1-60: minutes.
• P05: Ajuda File Bit: 0, 3 file mode; 1, 5 gear mode.
• P06: Wheel Diameter: Unit: inch; Precision: 0.1. (Important for accurate speed display)
• P07: Speed Gauge Magnetic Steel Number: Range: 1-100. (Important for accurate speed display. For high-speed motors, calculate: (magnets × deceleration ratio)).
• P08: Speed Limit: Range 0-100km/h (100 means no speed limit). Input 25 means max speed 25km/h.
• P09: Zero Start / Non-Zero Start: 0: zero start; 1: non-zero start.
• P10: Drive Mode: 0: Power Drive; 1: Electric Drive; 2: Power Drive and Electric Drive Coexistence.
• P11: Help Sensitivity Setting: Interval: 1-24.
• P12: Help Start Intensity Setting: Interval: 0-5.
• P13: Configuració del tipus de disc d'acer magnètic de potència: 5, 8, 12 Magnetic Steel Types.
• P14: Controller Limit Value: Default 12A; Range: 1-20A.
• P15: Controller Low Power.
• P16: ODO Zero Setting: Press and hold '+' and '-' for 5 seconds to clear ODO.
• P17: Auto Cruise: 0: No enabling cruising; 1: enabling cruising.
• P18: Display Speed Ratio Adjustment: Range: 50% ~ 150%.

6. Solució De Problemes

6.1 Codis d'error

6.2 Specific Troubleshooting for E10 Error

If the display shows E10 after connecting, there are two primary possibilities:

1. Communication Protocol Incompatibility: The communication protocol between the display (UART2) and your e-bike's controller may not be compatible. Verify that both components use the UART2 protocol.
2. Vehicle Component Issues: The overall condition of the vehicle's electrical system might be poor. This could involve issues with the boost controller, knob, or motor, which can lead to communication failure with the display. Inspect these components for any damage or malfunction.

7. Manteniment

• Neteja: Netegeu la pantalla i el cos amb un drap suau iamp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Resistència a l'aigua: The display has an IP67 rating, meaning it is protected against dust and temporary immersion in water. However, avoid prolonged exposure to heavy rain or submersion.
• Emmagatzematge: When not in use for extended periods, store the display in a dry, cool place away from direct sunlight.
• Inspecció del cable: Periodically check all cables and connectors for wear, damage, or loose connections.

8. Consells d'usuari

• Verificar la compatibilitat: Always double-check that your e-bike's controller uses the UART2 communication protocol before purchasing or installing the H6C-2 display to ensure proper function.
• Correct Parameter Settings: Accurately set parameters like wheel diameter (P06) and magnetic steel number (P07) for precise speed and mileage readings.
• Càrrega d'emergència: Utilize the built-in USB port for convenient emergency charging of your mobile devices during rides.

9. Garantia i assistència

For any technical support or warranty inquiries, please contact the manufacturer or your retailer. The company's address is Zhongshan Town, Heshan City, Jiangmen City, China. You can also visit their weblloc a www.haytrix-display.com.

Nota: Due to product upgrades, the content of the product may differ slightly from these specifications, but it will not affect normal use.

A full user manual in PDF format is available for download from the manufacturer's website or can be referenced via the original product listing.