1. Introducció
The VEVOR GFK160 Digital Liquid Filling Machine is a precision instrument designed for accurate and efficient filling of various low-viscosity liquids. Utilizing microcomputer control, it ensures high accuracy and consistent performance, making it ideal for applications in food and beverage, cosmetics, personal care, pharmaceutical, and chemical industries.
This machine features a self-priming pump capable of drawing liquid directly from a container and dispensing it through an anti-drip nozzle. It supports a wide filling volume range from 5 ml to 3500 ml. Please note that this machine is suitable for clear, thin liquids such as water, olive oil, drinks, vinegar, and milk. It is not designed for corrosive or highly viscous liquids.
Figure 1: VEVOR GFK160 Digital Liquid Filling Machine with included accessories.
Figure 2: Extensive uses for the GFK160 filler, including oils, drinks, perfume, and cosmetics.
2. Instruccions de seguretat
- Assegureu-vos sempre que la màquina estigui col·locada sobre una superfície estable i anivellada abans de fer-la funcionar.
- Connecteu la màquina a una presa de corrent amb connexió a terra amb el volum correctetage (AC110V-140V / 60 Hz).
- No feu servir la màquina amb les mans mullades o en condicions humides.
- Use the power switch for emergency stops.
- Ensure proper ventilation around the machine; the integrated air vents are for quick heat radiation.
- Do not attempt to fill corrosive or highly viscous liquids, as this can damage the pump and tubing.
- Regularly inspect the silicone tubing for wear or damage. Replace if necessary.
- Mantingueu els nens i el personal no autoritzat allunyats de la màquina en funcionament.
- Unplug the machine from the power source before cleaning or maintenance.
- Nota important: Upon receiving the machine, you may notice some stains. These are typically caused by the protective film melting during processing. Simply remove the protective film to reveal the pristine machine.
Figure 3: Power switch and air vents for safe operation and heat management.
3. Contingut del paquet
Si us plau, reviseu el paquet acuradament per assegurar-vos que tots els articles hi són i no estan danyats:
- 1 x VEVOR GFK160 Liquid Filling Machine
- 1 x cable d'alimentació
- 1 x tornavís
- 1 x Inner Hexagonal Wrench
- 1 x Manual d'usuari (aquest document)
4. Especificacions
| Característica | Especificació |
|---|---|
| Model | GFK-160 |
| Voltage | AC110V-140V / 60 Hz |
| Poder | 30W |
| Màx. Velocitat de flux | 0.8 gal/min / 3.2 l/min |
| Max. Suck Distance | 6.6 peus / 2 m |
| Repeat Error | < 0.5% |
| Volum d'ompliment | 0.18-123.2 oz / 5-3500 ml |
| Velocitat d'ompliment | 5-30 bottles/min |
| Diàmetre del broquet | 0.31 in / 8 mm |
| Anti-Dripping Function | Disponible |
| Memory Function out of Power | Disponible |
| Suitable Soft Tube | 17# (interior diameter: 6.4 mm, thickness: 1.6 mm, max pressure: 0.24Mp) |
| Mida del producte (L x W x H) | 13.8 x 10.7 x 5.9 polzades / 35 x 27 x 15 cm |
| Pes net | 12.1 lliures / 5.5 kg |
| Material | 304 Stainless Steel (1.2mm thickness) |
Figure 4: Product dimensions of the GFK160 Liquid Filler.
Figure 5: Detail of the 1.2mm thick stainless steel shell.
5. Configuració
Follow these steps to set up your VEVOR GFK160 Liquid Filling Machine:
- Desembalatge: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Posicionament: Place the main machine unit on a stable, flat, and dry surface. Ensure there is enough space around the machine for operation and ventilation.
- Assemble Filling Nozzle and Stand:
- Attach the metal stand rod to the side of the main unit using the provided screws and wrench.
- Slide the nozzle holder onto the stand rod and secure it at the desired height for your containers.
- Insert the anti-drip filling nozzle into the holder.
- Connect Inlet Tube:
- Connect one end of the silicone tube to the inlet port on the back of the machine.
- Attach the filter mesh to the other end of the silicone tube.
- Place the filter mesh end into your liquid supply container.
- Connect Outlet Tube:
- Connect the shorter silicone tube to the outlet port on the front of the machine, leading to the anti-drip nozzle.
- Connexió d'alimentació: Plug the power cord into the power socket on the back of the machine, then plug the other end into a suitable grounded electrical outlet.
- Connexió de pedals: Connect the foot pedal cable to the designated port on the front panel of the machine.
Figure 6: The GFK160 Liquid Filler fully assembled and ready for use.
Figure 7: Detail of the anti-drip nozzle and filter mesh, crucial for clean and efficient filling.
6. Funcionament
The GFK160 offers both automatic and manual control modes for flexible operation.
6.1 Tauler de control acabatview
Figure 8: The LCD display monitor and control interface.
The machine is controlled by a microcomputer via the LED display monitor. You can adjust filling volume and speed using the control buttons. The filling volume is determined by a combination of speed control and time control.
6.2 Engegada/apagada
- To power on, flip the red power switch located on the back of the machine to the 'ON' position.
- To power off, flip the power switch to the 'OFF' position.
6.3 Setting Filling Parameters
Refer to the control panel (Figure 8) for specific button functions. Typically, you will use buttons to:
- Seleccioneu Programa: The machine may have multiple program settings (P1, P2, etc.) to store different filling parameters.
- Set Filling Volume: Adjust the desired liquid volume (5-3500 ml) using the volume control buttons.
- Set Filling Speed: Adjust the pump speed to control the flow rate.
- Estableix el temps de retard: If applicable, set the delay between fills for continuous operation.
- Inici/Parada: Initiate or halt the filling process.
The LCD screen will display the current settings. Perform a few test fills to calibrate and ensure desired accuracy before mass production.
6.4 Modes de funcionament
The machine supports two primary operating modes:
- Auto Mode (Continuous Work): In this mode, the machine will continuously fill bottles based on the set volume and speed, with an optional delay between fills. This is ideal for high-volume production.
- Manual Mode (Foot Pedal): For individual fills, use the foot pedal. Each press of the foot pedal will initiate one filling cycle according to the programmed volume. This mode is useful for smaller batches or precise control.
Figure 9: Dual control modes: digital control via the panel and manual control via the foot pedal.
Figure 10: The foot switch provides convenient manual control for single filling cycles.
7. Manteniment
Proper maintenance ensures the longevity and optimal performance of your filling machine.
- Neteja de l'exterior: Wipe down the stainless steel shell with a soft, damp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar la superfície.
- Cleaning the Liquid Path: After each use, especially when changing liquids or before storage, flush the system with clean water or a suitable cleaning solution.
- Place the inlet tube into a container of clean water.
- Run the machine in auto mode for a few cycles to flush out any residual liquid.
- Ensure the anti-drip nozzle and filter mesh are thoroughly cleaned.
- Filter Mesh Inspection: Regularly inspect the filter mesh for any blockages or damage. Clean or replace if necessary to ensure smooth liquid intake.
- Tubing Inspection: Check the silicone tubing for any signs of wear, cracks, or discoloration. Replace tubing if it shows signs of degradation to prevent leaks and maintain hygiene.
- Emmagatzematge: When not in use for extended periods, clean the machine thoroughly, disconnect power, and store it in a dry, dust-free environment.
Figure 11: The anti-drip nozzle and filter mesh require regular cleaning to prevent blockages and ensure purity.
8. Solució De Problemes
This section addresses common issues you might encounter with your GFK160 Liquid Filling Machine.
| Problema | Causa possible | Solució |
|---|---|---|
| La màquina no s'encén | Cable d'alimentació no connectat; interruptor apagat; no hi ha alimentació de la presa de corrent. | Ensure power cord is securely plugged in. Flip power switch to 'ON'. Check power outlet with another device. |
| Liquid not flowing or slow flow | Inlet tube or filter mesh blocked; Liquid supply empty; Pump malfunction; Incorrect speed setting. | Check and clean filter mesh and inlet tube. Refill liquid supply. Verify speed setting on control panel. Contact support if pump issue persists. |
| Inaccurate filling volume | Incorrect volume setting; Air bubbles in liquid; Tubing leak; Pump wear. | Recalibrate volume setting. Ensure liquid is free of air bubbles. Check all tubing connections for leaks. If pump wear is suspected, contact support. |
| Liquid dripping from nozzle | Anti-drip mechanism malfunction; Nozzle blockage; Viscosity of liquid too high. | Clean the anti-drip nozzle thoroughly. Ensure the liquid is of low viscosity as specified. Contact support if anti-drip mechanism is faulty. |
| El pedal no respon | Foot pedal cable loose; Machine in auto mode; Foot pedal malfunction. | Ensure foot pedal cable is securely connected. Switch machine to manual mode. Test foot pedal; replace if faulty. |
9. Consells d'usuari
- For best accuracy, ensure the liquid supply is consistently above the pump level to minimize suction effort.
- When filling very small volumes, perform a few priming cycles to ensure the tube is fully filled with liquid and free of air.
- Experiment with different speed and time settings to find the optimal combination for your specific liquid and container size.
- Always use the appropriate type of tubing for the liquid being filled to prevent chemical reactions or degradation. The provided tubing is silicone.
10. Garantia i Suport
VEVOR is committed to providing high-quality equipment and tools. For any questions, technical assistance, or warranty claims, please contact VEVOR customer service. VEVOR offers 24/7 attentive service to assist you.
Consulteu la documentació de compra per conèixer els termes específics de la garantia i la informació de contacte.
