Lifud LF-GIF030YS Series LED Driver Instruction Manual

1. Producte acabatview

The Lifud LF-GIF030YS series is a 30W isolated constant current LED driver designed for indoor LED lighting applications. It features a flicker-free design, high performance, and is suitable for Class II light fixtures. This driver operates with an input voltage range of 220-240Vac and provides a stable output voltage of 33-40Vdc, with selectable output currents of 600mA, 700mA, or 750mA.

2. Instruccions de seguretat

• It is recommended that users install over voltage protection and surge protection devices in the power supply circuits of light fixtures to ensure electrical safety.
• The LED driver used in combination with the LED device is one of the accessories of the whole light fixture, and the EMC of the whole light fixture is not only susceptible to the driver itself, but to the LED light fixture and the whole light fixture's wiring. Thus, the manufacturer of LED light fixture should re-confirm the EMC of the whole light fixture before the whole light fixture is finished.
• The test conditions of the circuit breaker configuration quantity are the same as those of the inrush current.
• The PC cover, casing and end cap for assembling the LED driver in the light fixture must meet the fire rating of UL94-V0 or above.
• Ensure the input and output connections are correct before powering on.
• No obriu el controlador casing; no hi ha peces a l'interior que l'usuari pugui reparar.
• La instal·lació l'ha de fer un electricista qualificat.

3. Configuració i instal·lació

3.1 Product Terminals

3.2 Structure & Dimensions

The driver has an overall appearance (L*W*H) of 115*41*28 mm. The distance between the two positioning holes is 102.7 mm, and the diameter of the positioning holes is 4.3 mm.

3.3 Instruccions de cablejat

1. Connect the AC neutral wire to the 'AC-N' input terminal.
2. Connect the AC live wire to the 'AC-L' input terminal.
3. Connect the positive lead of your LED module to the 'LED+' output terminal.
4. Connect the negative lead of your LED module to the 'LED-' output terminal.
5. Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
6. Comproveu que l'entrada voltage is within the specified range of 220-240Vac.
7. Confirm that the LED module's voltage and current requirements match the driver's output specifications (33-40Vdc, 600mA/700mA/750mA).

4. Instruccions de funcionament

Once the Lifud LF-GIF030YS LED Driver is correctly installed and wired, it will automatically provide a constant current output to the connected LED module when power is supplied. The driver is designed for flicker-free operation, ensuring stable and consistent illumination from your LED lights.

• Ensure the power source is stable and within the specified input voltagrang e (220-240Vac).
• The driver will automatically regulate the output current to the specified value (600mA, 700mA, or 750mA depending on the model) to maintain constant brightness and protect the LEDs.
• No user adjustments are required during normal operation.

5. Manteniment

The Lifud LF-GIF030YS LED Driver is designed for long-term, reliable operation with minimal maintenance. Follow these general guidelines:

• Keep the driver in a clean, dry environment, free from excessive dust or moisture.
• Assegureu-vos que hi hagi una ventilació adequada al voltant del conductor per evitar el sobreescalfament.
• Comproveu periòdicament les connexions del cablejat per detectar qualsevol signe d'afluixament o danys.
• Do not attempt to repair the driver yourself. Refer to qualified personnel for any issues.

6. Solució De Problemes

If you encounter issues with your LED driver, consider the following:

6.1 Problemes comuns i solucions

• Sense sortida de llum:
  • Check if the input power supply is active and within the 220-240Vac range.
  • Verify all wiring connections (AC-N, AC-L, LED+, LED-) are correct and secure.
  • Ensure the LED module is functioning correctly and its specifications match the driver.
• Flickering or Unstable Light:
  • Confirm stable input voltage.
  • Comproveu si hi ha connexions soltes.
  • Ensure the LED module is compatible with a constant current driver.
• Sobreescalfament:
  • Assegureu-vos que hi hagi una ventilació adequada al voltant del conductor.
  • Verify the ambient temperature is within the specified operating range (-30°C to 45°C).

6.2 Característiques de protecció

The driver incorporates several protection features:

• Open Circuit Protection: <55V output voltage.
• Protecció contra curtcircuits: Hiccup mode (auto-recovery).
• Protecció contra la temperatura: -30°C to +45°C (ta), -30°C to +90°C (tc).

7. Especificacions

7.1 Especificacions generals

• Número de model: LF-GIF030YS
• Tipus de sortida: SIMPLE
• Origen: Xina continental
• Nivell IP: IP20
• Substància química molt preocupant: Cap

7.2 Característiques elèctriques

7.3 Condicions ambientals

• Temperatura de funcionament: -30 °C a +45 °C
• Humitat de funcionament: 20-90% HR (sense condensació)
• Temperatura/humitat d'emmagatzematge: -30°C to +80°C (6 months in Class I environment); 10-90%RH (no condensation)
• Pressió atmosfèrica: 86-106 kPa

7.4 Certifications & Safety Standards

• Certificats: TUV CB CE RCM, ENEC, UKCA, SAA, CCC
• Resistent Voltage: I/P-O/P: 3.75kV & 5mA & 60S
• Resistència d'aïllament: I/P-O/P: >100MΩ @ 500Vdc
• Normes de seguretat: ENEC: EN61347-1: 2015, EN61347-2-13: 2014/A1: 2017, EN62384 2016/A1: 2009, CE-LVD: EN61347-2-13: 2014/A1: 2017, EN61347-1: 2015, EN62493: 2015, CB: IEC61347-1: 2015, IEC61347-2-3: 2014, IEC 61347-2-13: 2014/AMD1: 2017, UKCA-LVD: EN61347-1: 2015/A1: 2021, EN61347-2-13: 2014/A1: 2017, EN62493: 2015, CCC: GB19510.1-2009, GB19510.14-2009, RCM: AS/NZS 61347.1, AS/NZS 61347.2.13, SAA: AS 61347.2-13: 2018
• EMI: CE-EMC/RCM: EN55015, EN61000-3-2, EN61000-3-3, UKCA-EMC: EN IEC 55015, 2019/A11: 2020, EN 61547: 2009, EN IEC 61000-3-2: 2019/A1: 2021, EN 61000-3-3: 2013/A2: 2021, CCC: GB/T17743, GB17625.1, GB17625.2
• EMS: CE-EMC/RCM: EN61000-4-2, 3, 4, 5 (llamp 1kV), 6, 11
• RoHS: RoHS 2.0 (UE) 2015/863

7.5 Especificacions de l'embalatge

8. Consells d'usuari

• Assegureu-vos sempre que l'aigua totaltage of your LED modules does not exceed the driver's maximum output power (30W for this series).
• For optimal performance and longevity, operate the driver within its specified temperature and humidity ranges.
• Consider using appropriate surge protection for the AC input, especially in areas prone to power fluctuations.

9. Garantia i Suport

The Lifud LF-GIF030YS LED Driver comes with a 5 any de garantia from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service conditions. Please refer to the full warranty conditions for details.

9.1 Informació de contacte

For technical support, warranty claims, or general inquiries, please contact Lifud Technology Co., Ltd. using the information below:

• Adreça: Production Base 1 (B-2), Building 8, Kutto Industrial Park, NO.26 Xinhu Road, Bao'an District, Shenzhen, China.
• Telèfon: +86(0)755 8373 9299
• Weblloc: www.lifud.com
• Correu electrònic: sales@lifud.com