Introducció
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Kinco GL Series Human Machine Interface (HMI) touchscreen. The Kinco GL series offers reliable and efficient control solutions for various industrial applications. Please read this manual thoroughly before using the device to ensure proper and safe operation.
Producte acabatview
The Kinco GL Series HMIs are advanced touchscreens designed for intuitive control and monitoring. They feature high-resolution TFT displays, robust processors, and various communication interfaces to integrate seamlessly into your control systems.
Figure 1: Kinco GL070/GL070E HMI units in their packaging.
Figura 2: posterior view of a Kinco GL100 HMI, highlighting connectivity ports.
Configuració i instal·lació
Proper installation is crucial for the reliable operation of your HMI. Follow these steps carefully:
- Desembalatge i inspecció: Carefully remove the HMI from its packaging. Inspect for any signs of damage during transit. Report any damage to your supplier immediately.
- Retall del panell: Prepare the control panel with the correct cutout dimensions for your specific GL series model. Refer to the 'Panel Cutout Dimensions' diagram in the Specifications section for precise measurements.
- Muntatge: Insert the HMI into the prepared cutout. Secure it using the provided mounting clips or screws, ensuring a snug fit to prevent dust and moisture ingress.
- Cablejat: Connect the power supply (DC10V ~ DC28V) to the HMI's power input terminals. Ensure correct polarity. Connect communication cables (RS232, RS485, RS422, Ethernet if applicable) to the appropriate ports.
- Engegada inicial: After all connections are secure, apply power to the HMI. The device should power on and display the boot screen.
Model Replacement Information
If you are replacing an older MT series HMI with a new GL series model, refer to the compatibility table below. Note that some replacements may require program conversion or panel cutout adjustments.
Figure 3: MT Series to GL Series HMI Replacement Guide.
| Model original | Nou Model | Program Conversion | Mida d'obertura |
|---|---|---|---|
| MT4230T/TE | GL043/TE | Conversió directa | consistent |
| MT4220TE | GH043E | Conversió directa | consistent |
| ET070 | ET2070 GL070 | Conversió directa | consistent |
| MT4434T/TE | GL070/TE | Conversió directa | consistent |
| MT4414T/TE | G070/TE | Conversió directa | consistent |
| MT4414TE-CAN | G070E-CAN | Conversió directa | consistent |
| MT4404T | GH070 | Conversió directa | consistent |
| MT4424TE | GH070E | Conversió directa | consistent |
| MT4532T/TE | GL100/TE | Conversió directa | consistent |
| MT4512T/TE | G100/E | Conversió directa | consistent |
| MT4513T/TE | GL104E | Conversió directa | consistent |
| MT4620TE | G121E | Conversió directa | consistent |
| MT4720TE | GL150E/GH150E | Conversió directa | Incoherent |
Instruccions de funcionament
The Kinco GL Series HMIs are designed for user-friendly operation. Once powered on, the HMI will load the configured application. Interaction is primarily via the resistive touchscreen.
- Interacció amb pantalla tàctil: Use your finger or a stylus to interact with on-screen buttons, input fields, and displays. The resistive touch panel responds to pressure.
- Descàrrega del programa: Applications can be downloaded to the HMI via USB Slave (Micro USB), U disk, or network port (for 'E' models). Use Kinco DTools software for program conversion and download.
- Funcionalitat de l'amfitrió USB: The USB Host port can be used for connecting external devices such as a USB flash drive for data logging or program updates, or a USB printer.
- Comunicació: The HMI supports various communication protocols via RS232, RS485, and RS422 ports, allowing it to interface with PLCs, controllers, and other industrial equipment.
Manteniment
Regular maintenance ensures the longevity and optimal performance of your HMI.
- Neteja: Utilitzeu un drap suau i sense pelusa dampened with a mild, non-abrasive cleaner to wipe the screen and casing. Avoid harsh chemicals or excessive moisture.
- Actualitzacions de firmware: Periodically check the Kinco website for firmware updates. Keeping your HMI's firmware up-to-date can improve performance and add new features.
- Condicions ambientals: Ensure the HMI operates within its specified environmental conditions (temperature, humidity) to prevent damage.
- Connexions de cable: Regularly inspect all cable connections for tightness and signs of wear. Loose connections can lead to intermittent operation or communication errors.
Resolució de problemes
Aquí teniu alguns problemes comuns i les seves possibles solucions:
- HMI does not power on:
- Comproveu la font d'alimentació voltage (DC10V ~ DC28V).
- Ensure power cables are securely connected and not damaged.
- Verifiqueu que la font d'alimentació estigui activa.
- La pantalla tàctil no respon:
- Recalibrate the touchscreen if the option is available in the system settings.
- Assegureu-vos que la pantalla estigui neta i lliure de residus.
- Restart the HMI.
- Errors de comunicació:
- Verify communication cable connections (RS232, RS485, RS422, Ethernet).
- Check communication settings in the HMI application and the connected device (e.g., baud rate, parity, data bits).
- Ensure the correct communication protocol is selected.
- Display issues (e.g., flickering, no image):
- Comproveu l'estabilitat de la font d'alimentació.
- Restart the HMI.
- Si el problema persisteix, poseu-vos en contacte amb l'assistència tècnica.
Especificacions
Kinco GL070 / GL070E Specifications
Figure 4: Kinco GL070 / GL070E Technical Specifications.
| Característica | GL070 | GL070E |
|---|---|---|
| Rendiment | Pantalla TFT de 7 polzades | |
| Àrea de visualització | 154.08(W)x85.92(H) mm | |
| Resolució | 800*480 píxels | |
| Color de la pantalla | 16.77 million true colors | |
| Viewangle ing | 70/70/50/70 (Left/Right/Up/Down) | |
| Relació de contrast | 500:1 | |
| Tipus de llum de fons | LED | |
| Brillantor | 250 cd/m² | |
| Vida de contrallum | >30000 hores | |
| Panell tàctil | 4-wire precision resistive network (surface hardness 4H) | |
| Processador | ARM RISC 32Bit 800MHz | |
| Emmagatzematge | 128MB NAND Flash + 128MB DDR3 memory | |
| RTC | Built-in real-time clock | |
| Emmagatzematge ampliable | 1 Amfitrió USB | |
| Print Port | USB Host / Serial Port | |
| Ethernet | No | 10/100M adaptive |
| Descàrrega del programa | USB Slave (Micro USB) / U disk | USB Slave (Micro USB) / U disk / Network port |
| Port de comunicació | COM0:RS232/RS485/RS422, COM2:RS232 | |
| Especificacions elèctriques | ||
| Potència d'entrada | DC10V ~ DC28V | |
| Consum d'energia | 3.6 W a 24 VCC | |
| Allowable Power Loss | <3 ms | |
| Resistència d'aïllament | >50MΩ @500V DC | |
| Resistir voltage Prova | 500 VAC 1 minute | |
| Especificacions estructurals | ||
| Material exterior | Plàstic d'enginyeria | |
| Dimensions exteriors | 204×150×37 mm | |
| Installation Cutout Size | 192×138 mm | |
| Pes | 0.5 kg | |
Kinco GL100 / GL100E Specifications
Figure 5: Kinco GL100 / GL100E Technical Specifications.
| Característica | GL100 | GL100E |
|---|---|---|
| Rendiment | Pantalla TFT de 10.1 polzades | |
| Àrea de visualització | 222.72mm(W)x125.28mm(H) mm | |
| Resolució | 1024*600 píxels | |
| Color de la pantalla | 16.77 million true colors | |
| Viewangle ing | 70/70/70/70 (Left/Right/Up/Down) | |
| Relació de contrast | 500:1 | |
| Tipus de llum de fons | LED | |
| Brillantor | 400 cd/m² | |
| Vida de contrallum | >30000 hores | |
| Panell tàctil | 4-wire precision resistive network (surface hardness 4H) | |
| Processador | ARM RISC 32Bit 800MHz | |
| Emmagatzematge | 128MB NAND Flash + 128MB DDR3 memory | |
| RTC | Built-in real-time clock | |
| Emmagatzematge ampliable | 1 Amfitrió USB | |
| Print Port | USB Host / Serial Port | |
| Ethernet | No | 10/100M adaptive |
| Descàrrega del programa | USB Slave (Micro USB) / U disk | USB Slave (Micro USB) / U disk / Network port |
| Port de comunicació | COM0:RS232/RS485/RS422, COM2:RS232 | |
| Especificacions elèctriques | ||
| Potència d'entrada | DC10V ~ DC28V | |
| Consum d'energia | 6 W a 24 VCC | |
| Allowable Power Loss | <3 ms | |
| Resistència d'aïllament | >50MΩ @500V DC | |
| Resistir voltage Prova | 500 VAC 1 minute | |
| Especificacions estructurals | ||
| Material exterior | Plàstic d'enginyeria | |
| Dimensions exteriors | 280×193×36 mm | |
| Installation Cutout Size | 261×180 mm | |
| Pes | 0.9 kg | |
Dimensions del tall del panell
Figure 6: Panel Cutout Dimensions for Kinco GL Series HMIs.
| Model(s) | Mides de tall (mm) |
|---|---|
| GH043, GH043E | 146 x 81 |
| GL070, GL070E, G070, G070E CAN, GT070E, GT070-4G, GT070-WiFi | 192 x 138 |
| GL100, GL100E | 261 x 180 |
| GL043, GL043E | 119 x 93 |
| GT100E, GT100E-4G, GT100E-WiFi | 260 x 202 |
| G100, G100E, GL104E | 299 x 219 |
| G121E | 340 x 250 |
| GL150E | 383 x 283 |
Consells per a l'usuari
- Backup Programs: Always back up your HMI application programs regularly to an external storage device.
- Protecció de pantalla: Consider using a screen protector to prevent scratches and prolong the life of the touch panel, especially in harsh industrial environments.
- Cicle de potència: For minor glitches, a simple power cycle (turning off and on) can often resolve temporary issues.
- Documentació: Keep this manual and any specific application documentation readily accessible for quick reference.
Garantia i Suport
Kinco products are designed for reliability and performance. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your authorized Kinco distributor. For technical support, assistance with programming, or advanced troubleshooting, please contact Kinco customer service or your local support representative. Ensure you have your product model and serial number ready when seeking support.
