1. Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your BENINCA TO GO 2A garage door remote control. This remote utilizes Advanced Rolling Code (ARC) technology for enhanced security and reliable performance. Please read this manual thoroughly before attempting to program or operate the device.
2. Informació de seguretat
- Keep the remote control out of reach of children to prevent accidental operation of the garage door.
- Do not expose the remote control to water or extreme temperatures.
- Eliminar les bateries usades de manera responsable d'acord amb la normativa local.
- Ensure the garage door path is clear before operating the remote control.
3. Producte acabatview
The BENINCA TO GO 2A is a compact and durable remote control designed for garage door and gate openers. It features two buttons for controlling different functions or multiple doors.
Figura 3.1: Frontal view of the BENINCA TO GO 2A remote control.
Figure 3.2: Various angles of the TO GO 2A remote control, showing its design and compact size.
4. Especificacions
| Característica | Descripció |
|---|---|
| Número de model | BENINCA TO GO 2A |
| Nombre de canals | 2 |
| Freqüència | 433.92 MHz |
| Mètode de codificació | Rolling Code (Advanced Rolling Code - ARC 128 Bit) |
| Bateria | 12V 23A |
| Temperatura de funcionament | -20 °C a +50 °C |
| Dimensions | 65x40x14 mm |
| Certificació | CE |
Què és l'ARC?
The Advanced Rolling Code (ARC) technology, with its 128-bit transmitted code (compared to the previous 64-bit version), ensures maximum security against unauthorized access by constantly changing the transmission code.
5. Configuració i programació
The BENINCA TO GO 2A remote control is programmed directly with your receiver unit. Important: You must have physical access to your garage door or gate opener's receiver unit to perform the programming steps.
- Localitza el receptor: Obriu el casing of your receiver unit. It is typically located next to your garage door or gate motor.
- Activa el mode de programació: On the receiver's circuit board, press the programming button, usually labeled 'PGM'. The LED light on the receiver will illuminate. Release the 'PGM' button.
- Vincula el comandament a distància: Within the next 10 seconds, press a button on your new BENINCA TO GO 2A remote control. Release the button.
- Confirma la programació: Wait for approximately 10 seconds. Your new remote control should now be programmed and ready for use.
Figura 5.1: Example of a receiver circuit board showing the 'PGM' button and LED indicator for programming.
6. Instruccions de funcionament
Once programmed, operating your BENINCA TO GO 2A remote control is straightforward:
- Press the programmed button on your remote control to open or close your garage door or gate.
- If you have programmed multiple functions or doors, use the corresponding button for each action.
Figure 6.1: Demonstrating the use of the remote control to operate a garage door.
7. Manteniment
Canvi de bateria
The BENINCA TO GO 2A remote control uses a 12V 23A battery. If the remote's range decreases or it stops responding, it's likely time to replace the battery.
- Obriu amb cura el comandament a distància casing.
- Remove the old 12V 23A battery.
- Insert a new 12V 23A battery, ensuring correct polarity.
- Tanqueu el comandament a distància casing de manera segura.
8. Solució De Problemes
Avís de compatibilitat
The BENINCA TO.GO2A remote control is no compatible with the similar-looking BENINCA TO.GO2WV remote control. Please ensure you have the correct model for your receiver.
Figure 8.1: Visual guide to distinguish between TO.GO2A (ARC) and TO.GO2WV (Rolling Code) models.
Problemes comuns i solucions
- El comandament a distància no respon: Check the battery. If the battery is new, try re-programming the remote control with the receiver.
- Interval reduït: Replace the battery. Ensure there are no obstructions between the remote and the receiver.
- Comandament a distància perdut: If your remote control is lost, you can purchase a new BENINCA TO GO 2A remote and program it to your existing receiver following the steps in Section 5. This will effectively replace the lost remote.
9. Consells d'usuari
- Programming with Electric Gates: The programming method for electric gates is generally the same as for garage doors. Always ensure you have access to the gate's receiver unit and follow the steps outlined in Section 5.
- Verify Model: Abans de la compraasing a replacement or additional remote, double-check that your existing remote and receiver are compatible with the BENINCA TO GO 2A (ARC) model, especially noting the visual differences from the TO.GO2WV model.
10. Contingut del paquet
Your BENINCA TO GO 2A remote control package includes:
- BENINCA TO GO 2A Remote Control
- 12V 23A Battery
- Clauer
- English User Manual (printed)
- Embalatge de caixa blanca
Figure 10.1: All items included in the BENINCA TO GO 2A remote control package.
11. Recursos addicionals
For further details or if you require a digital copy of the manual, you may refer to the official PDF document: Manual d'usuari (PDF)
12. Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu la documentació que s'inclou amb la compra o poseu-vos en contacte directament amb el venedor. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
