HABOTEST HT5009 Digital Brake Fluid Tester

1. Introducció

The HABOTEST HT5009 is a digital brake fluid tester designed to accurately measure the moisture content in various types of brake fluid, including DOT3, DOT4, and DOT5.1. This device helps ensure vehicle safety by indicating when brake fluid replacement is necessary. Its flexible probe, high sensitivity, and audio-visual alarms make it a reliable and user-friendly tool for both professional mechanics and home users.

2. Advertències i precaucions de seguretat

Please read this instruction manual carefully before use and strictly observe all safety rules, cautions, and warnings.

• The protection provided by the detector can be compromised if not operated according to these instructions.
• Do not use the detector if the screen does not display or if the device is damaged or not working properly.
• Before each use, check the probe for dirt, cracks, or breaks. If any issues are suspected, send the device for repair.
• The test results are for reference only. The manufacturer does not assume liability for personal or property losses resulting from decisions made based solely on the test results.
• When testing liquid, the metal part of the detector probe must be completely immersed in the liquid.
• Always comply with local and national safety regulations and use appropriate protective equipment as required by authorities.

3. Producte acabatview

The HT5009 features an ergonomic design for comfortable single-handed operation and a high-precision metal probe for stable measurements.

Meter Structure:

1. Sonda
2. Free Pole
3. Lighting (LED Flashlight)
4. Pantalla de visualització
5. Function Key (F)
6. Hold/Light Key (H/&#x23x21;C)
7. Power Key (&#x23x21; )
8. Detection Head
9. Mànega metàl·lica

4. Configuració

Instal·lació de la bateria:

The HT5009 requires two 1.5V AAA batteries (not included). To install or replace batteries:

1. Unscrew the battery cover screw located on the back of the device.
2. Obriu la tapa de la bateria.
3. Remove any old batteries if present.
4. Insert two new 1.5V AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
5. Tanqueu la tapa de la bateria i fixeu-la amb el cargol.

5. Instruccions de funcionament

5.1 Encès/Apagat

• Activar: Hold down the Power Key (&#x23x21; ) for more than 1 second. After a buzzer beep, the screen will light up, and the device enters the test state.
• Apagar: While the detector is on, press the Power Key (&#x23x21; ) to shut down the machine.

5.2 Function Key (Brake Oil Type Selection)

The default brake oil type is DOT3. To switch between types:

• Press the Function Key (F) once to switch to DOT4.
• Press it again to switch to DOT5.1.
• Press it a third time to cycle back to DOT3.

5.3 Moisture Detection

1. After powering on, select the appropriate brake oil type (DOT3, DOT4, or DOT5.1) using the Function Key.
2. Ensure the metal probe is clean before testing.
3. Fully immerse the metal part of the detection head into the brake fluid you wish to test. Hold it for approximately 3 seconds until the display stabilizes.
4. Observe the display and read the numerical value. The device provides a three-color backlight indication and an audio-visual alarm based on moisture content:
• 0-2% Moisture: Green backlight. Brake fluid is still usable.
• 2-3% Moisture: Yellow backlight with a slow beep. Brake fluid replacement is recommended.
• >3% Moisture: Red backlight with a fast beep. Urgent brake fluid replacement is required.

5.4 Retenció de dades

• During measurement, press the Hold/Light Key (H/&#x23x21;C) to hold the displayed data.
• Press the key again to release the data hold function.

5.5 LED Flashlight Illumination

• When measuring in low-light environments, long press the Hold/Light Key (H/&#x23x21;C) to turn on the LED flashlight.
• Long press the key again to turn off the flashlight.

5.6 Apagat automàtic

To conserve battery life, the device will automatically shut down after approximately 5 minutes of no signal detection or inactivity.

6. Manteniment

6.1 Neteja de la sonda

It is essential to protect the metal probe. Corrosion, scratches, or oxidation on the metal probe can potentially affect the accuracy of detection. After testing any liquid, please clean the detection head thoroughly with a wet cloth. Ensure the test pen is completely dry before storing or subsequent use.

6.2 Indicació de bateria baixa

Quan la bateria voltage drops below 2.6V, the screen will display a battery icon (&#x23x26;#x21; ). If the voltage drops further to 2.4V, the detector will automatically power off. Replace the batteries promptly when the low battery indicator appears to ensure uninterrupted testing.

6.3 Calibration Resistor Socket

The device includes a built-in calibration resistor socket. By inserting the probes into this socket, you can simulate different measurement environments to verify the detector's measuring accuracy.

7. Solució De Problemes

8. Especificacions

9. Consells d'usuari

• Always keep the probe clean and dry to ensure accurate readings and prolong the life of the device.
• For best results, perform tests in a well-lit area, or utilize the built-in LED flashlight.
• Remember to select the correct brake fluid type (DOT3, DOT4, or DOT5.1) before testing to avoid erroneous results.
• If you frequently test different brake fluid types, ensure thorough cleaning of the probe between tests to prevent cross-contamination.

10. Garantia i Suport

For detailed warranty information, technical support, or service inquiries, please refer to the official documentation provided with your product or contact the manufacturer directly. A comprehensive user manual in PDF format is available for download or reference:

Descarrega el manual d'usuari (PDF)